Professional Documents
Culture Documents
Panning Audio:
Stereo On - Hold Power Button + Auto M Down Button
Both: The diagnostic assist function outputs sound to the speakers in teh following
order to determine condition of the speakers and wiring harness between teh base
unit and each speaker.
1. Left door speaker and tweeter
2. Right door speaker and tweeter
3. Right rear door speaker and woofer
4. Left rear door speaker and woofer
ANT Off/On
Stereo On - Hold Power Button + AM Button
Non-Bose: Did not have any noticeable affect
Bose: ???
(think this is just a status message. When in CD mode your ANT is off, and when in
FM/AM it is on, Any other info to what is really going on would be great.)
AMP Off/On
Stereo On - Hold Power Button + Scan Up Button
Both: The diagnostic assist function displays the output state of the audio
amplifier operating signal to determine condition of the audio amplifier, base
unit, and wiring harness between the base unit and audio amplifier
Button Check
Stereo On - Hold Power Button + MD/Tape
Both: With this option enabled it will allow you to ensure that all buttons on the
stereo works. Each button will give an audible alarm when pressed, including the
steering wheel buttons.
Self Diagnostics - Fault Isolation(still need to check this one out)
Stereo Off - Hold Power Button + AM + TAPE/MD Buttons
Both: This will step through a series of self test to check for a proper working
audio system. The first displayed message is who made your head unit and the part
number. To stop the diagnostics and "pause" the screen, turn your ignition to the
lock position.
(will post the code to manufacture codes later on)
)))+______________________________________
Different diagnostic functions and test are available through button combinations.