Professional Documents
Culture Documents
Version: 1.07
TRACGV500MT002 -0-
GV500 Manage Tool User Guide
Version 1.07
Date 2018-11-16
Status Release
n k
General Notes
i
Queclink offers this information as a service to its customers, to support application and
l l
engineering efforts that use the products designed by Queclink. The information provided is
c a
based upon requirements specifically provided to Queclink by the customers. Queclink has not
i
undertaken any independent search for additional relevant information, including any
e t
information that may be in the customer’s possession. Furthermore, system validation of this
u
product designed by Queclink within a larger electronic system remains the responsibility of the
n
customer or the customer’s system integrator. All specifications supplied herein are subject to
Q fide
change.
Copyright
This document contains proprietary technical information which is the property of Queclink
Wireless Solutions Co., Ltd. The copying of this document and giving it to others and the using or
n
communication of the contents thereof, are forbidden without express authority. Offenders are
liable to the payment of damages. All rights are reserved in the event of grant of a patent or the
o
registration of a utility model or design. All specifications supplied herein are subject to change
without notice at any time.
C
TRACGV500MT002 -1-
GV500 Manage Tool User Guide
Contents
Contents ............................................................................................................................................ 2
0. Revision History............................................................................................................................. 3
1. GV500 Manage Tool Interface ...................................................................................................... 4
1.1. System Requirements .......................................................................................................... 4
1.2. COM Setting ........................................................................................................................ 4
1.3. Quick Setting Wizard ........................................................................................................... 5
1.4. Professional Setting Windows ............................................................................................. 6
1.4.1 Title Bar ...................................................................................................................... 6
k
1.4.2 Menus ......................................................................................................................... 6
n
1.4.2.1 Start Menu ............................................................................................................................. 6
i
1.4.2.2 Tool Menu............................................................................................................................... 6
l l
1.4.2.3 Help Menu .............................................................................................................................. 8
c
1.4.3 Toolbar ........................................................................................................................ 8
ia
1.4.4 Status Bar.................................................................................................................... 9
e t
1.4.5 Command Browser and Command Operation Space ................................................. 9
1.4.5.1 Command Browser ............................................................................................................... 10
u n
1.4.5.2 Command Operation Space .................................................................................................. 11
1.5. Operation Result Interface ................................................................................................ 12
Q fide
1.5.1 Operation Successful Interface ................................................................................. 12
1.5.2 Operation Failed Interface ........................................................................................ 12
2. Operation Instructions ................................................................................................................ 14
2.1. Device Configuration with Quick Setting Wizard .............................................................. 14
n
2.1.1 Welcome to Quick Setting Wizard ............................................................................ 14
2.1.2 GPRS Network Setting .............................................................................................. 14
o
2.1.3 Main Server Setting .................................................................................................. 15
2.1.4 Fixed Time Report Setting ........................................................................................ 16
C
2.1.5 Sending Command to Device.................................................................................... 17
2.2. Device Configuration in Professional Setting Mode .......................................................... 19
2.3. Read/Save All Configurations ............................................................................................ 20
2.4. Load/Send All Configurations ............................................................................................ 21
TRACGV500MT002 -2-
GV500 Manage Tool User Guide
0. Revision History
k
4. Updated MT Version to 1.02.
1.02 2016-09-30 Jeff Qiu 1. Modified the <Mask> parameter in the
n
command AT+GTPDS.
l i
2. Added the <Output Direction> parameter
l
in the command AT+GTRTO.
c a
3. Added the AT+GTGAM command.
e i
4. Added mode 5 of the <Buffer Mode> in
t
the AT+GTSRI and AT+GTQSS commands.
u n
5. Added the <High Priority Report Mask>
parameter in the AT+GTSRI command.
Q fide
6. Updated MT Version to 1.03.
1.03 2016-11-21 Ada Liu 1. Added the <Send Failure Timeout>
parameter in the command AT+GTDOG.
2. Changed the default value of <Motion
Speed Threshold> in AT+GTGAM to 25.
n
3. Change the <High Priority Report Mask>
o
parameter in the AT+GTSRI command.
4. Updated MT Version to 1.04.
C
1.04 2017-06-08 Jeff Qiu 1. Added the <Enable SMS ACK> parameter
in the AT+GTSRI command.
1.05 2017-08-03 Sandy Wu 1. Added mode 8 in the AT+GTFRI
command.
1.06 2018-05-04 Abbott Zhang 1. Added AT+GTVMS, AT+GTVVS, and
AT+GTAVS commands.
2. Added <Monitor Sync Protocol> and <IGF
Debounce Time> parameters in the
AT+GTOBD command.
1.07 2018-11-16 Leaf Ye 1. Modified some details.
TRACGV500MT002 -3-
GV500 Manage Tool User Guide
GV500 Manage Tool is PC software which can be used to configure GV500 through UART. It is
easy for the backend server developers to configure GV500 with manage tool, which has friendly
user interface. The correct command messages sent to GV500 will be displayed on the Manage
Tool. (These messages can also be sent by SMS or GPRS).
The administrators can also use the Manage Tool to configure GV500 before sale. But it is strongly
recommended to establish a backend server and control GV500 by SMS or GPRS. Please refer to
k
“GV500 @Track Air Interface Protocol” for details.
i n
Before using the Manage Tool, please install driver for the USB data cable
l l
(DATA_CABLE_M/Data_Cable_MC5). After that, a new COM port can be found in the PC system.
c
Then please follow the steps below:
ia
1. Connect GV500 to PC with USB data cable (DATA_CABLE_M/Data_Cable_MC5).
e t
2. Run “GV500 Manage Tool Rx.xx.exe”.
u
Q fide n
1.1. System Requirements
n
1.2. COM Setting
Co
Select the COM port and baud rate (115200bps by default), input the password (“gv500” by
default), and click “OK” button. Then the setting window will be displayed.
TRACGV500MT002 -4-
GV500 Manage Tool User Guide
The Quick Setting Wizard provides basic settings for the device. If you want to use more
functions of the device, please change to enter professional setting mode.
Before you enter Quick Setting Wizard, you must make sure the COM connection is OK.
Please refer to Chapter 2.1 for the details of setting with Quick Setting Wizard.
i n k
cl ia l
u e n t
Q fide
o n
C
TRACGV500MT002 -5-
GV500 Manage Tool User Guide
Menus
Toolbar
Command
Browser
k
Command
Operation
i n
Space
cl ia l
Status Bar
u e n t
Q fide
1.4.1 Title Bar
Title Bar indicates current command title and the name of the Manage Tool.
n
1.4.2 Menus
o
It includes “Start”, “Tool”, and “Help” menu.
C
1.4.2.1 Start Menu
[COM Setting]: It is used to set the COM information and password. For setting details, please
refer to Chapter 1.2.
Tool menu includes “Quick Setting Wizard”, “Operation Log”, and “Options” settings.
[Quick Setting Wizard]: It is used to open Quick Setting Wizard directly. Please refer to Chapter
2.1 for details.
TRACGV500MT002 -6-
GV500 Manage Tool User Guide
i n k
cl a l
Operation
e i
Log
u n t
Q fide
[Options]: It is used to configure the basic settings of the Manage Tool.
“Basic Options” includes startup setting options and log save option.
o n
C
“Advanced Options” includes COM settings and other settings.
COM Settings is used to set COM setting. It is recommended to use default settings
for these settings.
TRACGV500MT002 -7-
GV500 Manage Tool User Guide
i n k
cl
1.4.2.3 Help Menu
ia l
e t
[About]: Select “About”. Then the following pop up window will be displayed.
u
Q fide n
o n
C
“Manage Tool Version” indicates the version of this Manage Tool.
“Support Version” indicates the firmware which this Manage Tool is used for.
“Device Version” indicates the firmware which connects to PC. It is recommended to
use the same version as Support Version. If Support Version and Device Version are
different, the new feature(s) of the device can not be used in this tool.
“Mcu Version” indicates the device’s MCU version which connects to PC.
“Hw Version” indicates the device’s HW version which connects to PC.
1.4.3 Toolbar
It includes “COM Setting”, “Operation Log”, “Quick Setting Wizard”, “Real All Configuration”,
“Send All Configuration”, “Save All Configuration”, and “Connect/Disconnect to COM”.
TRACGV500MT002 -8-
GV500 Manage Tool User Guide
[COM Setting]: It is used to set the COM information and password. For setting details, please
refer to Chapter 1.2.
[Quick Setting Wizard]: It is used to open Quick Setting Wizard directly. Please refer to Chapter
2.1 for details.
[Read All Configuration]: It is used to display/hide “Read From Device” and “Load Configuration
k
From File”.
cl i n l
a
“Read From Device”: It is used to read all configurations (except the commands AT+GTORR
e i
and AT+GTRTO) from the device which connects to PC.
t
“Load Configuration From File”: It is used to load configuration file to the Manage Tool.
u n
[Send All Configuration]: It is used to send all configurations (except commands AT+GTORR and
Q fide
AT+GTRTO) in Command Operation Space.
[Save All Configuration]: It is used to save all configurations in Command Operation Space to file.
o n
1.4.4 Status Bar
C
There are system status and current status in Status Bar.
[System Status]: It indicates the count of commands which are waiting and being executed.
[Current Status]: It indicates current COM status, IMEI, protocol version and software version
read from the device.
This area is mainly used to read and set parameters of the device.
TRACGV500MT002 -9-
GV500 Manage Tool User Guide
Command Browser divides all @Track protocol commands into several parts. Click Function in
command Browser, parameters of this command will be shown in Command Operation Space.
k
Protocol Watchdog AT+GTDOG
Outside Working Hours AT+GTOWH
n
Time Adjustment AT+GTTMA
l i
Settings for Preserving Device's Specified AT+GTPDS
l
Logic States
c a
Hex Report Mask AT+GTHRM
e i
Position Related Report Fixed Report Information AT+GTFRI
t
Emergency Report Mode AT+GTEMG
u n
Alarm Settings Geo-Fence Information AT+GTGEO
Speed Alarm AT+GTSPD
Q fide
Harsh Behavior Monitoring AT+GTHBM
Jamming Detection AT+GTJDC
Tow Alarm Configuration AT+GTTOW
Excessive Idling Detection AT+GTIDL
n
Start/Stop Report AT+GTSSR
Crash Detection AT+GTCRA
o
Roaming Detection Configuration AT+GTRMD
IO Application External Power Supply Monitoring AT+GTEPS
C
OBD Application OBDII Configuration AT+GTOBD
OBDII Real Time Request AT+GTORR
OBDII Status Monitoring AT+GTOSM
Virtual Ignition Settings Voltage Virtual Ignition Setting AT+GTVVS
Accelerometer (Motion Status) Virtual AT+GTAVS
Ignition Setting
Virtual Ignition Mode Selection AT+GTVMS
Other Settings Hour Meter Count AT+GTHMC
Real Time Operation AT+GTRTO
White List AT+GTWLT
GNSS-Assisted Motion Measurement AT+GTGAM
TRACGV500MT002 - 10 -
GV500 Manage Tool User Guide
Command
Description
Parameters
Area
i n k
cl ia l
Command
u e n t
Q fide
Display
n
[Parameters Area]: Set/Read parameters of this command in this area.
o
[Command Display]: Command with parameters in parameters area is displayed in this area.
C
[Read]: Click this button to read this command from the device.
TRACGV500MT002 - 11 -
GV500 Manage Tool User Guide
i n k
l l
Command is sent successfully.
e c t ia
u
Q fide n
n
1.5.2 Operation Failed Interface
o
There should be something wrong with COM port connection if the failure reason is timeout.
C
There should be COM port that is occupied. Please close all other COM-related applications.
TRACGV500MT002 - 12 -
GV500 Manage Tool User Guide
i n k
cl ia l
u e n t
There are some issues with this COM. Please check your COM wire or port.
Q fide
o n
C
TRACGV500MT002 - 13 -
GV500 Manage Tool User Guide
2. Operation Instructions
The Manage Tool is developed based on the @Track Air Interface Protocol. Please refer to
“GV500 @Track Air Interface Protocol” for details.
The Quick Setting Wizard provides basic settings for the device. If you want to use more
k
functions of GV500, please change to professional setting mode.
i n
2.1.1 Welcome to Quick Setting Wizard
l l
Click “Quick Setting Wizard” in toolbar, and open Quick Setting Wizard. If the “Result” in this
c a
window is OK, click “Next”. If the “Result” is not OK, please check the COM port connection till
e i
the result is OK.
u n t
Q fide
o n
C
Welcome to Quick Setting Wizard
Step_1: Set APN, APN user name and password in this window. For the meanings of these
TRACGV500MT002 - 14 -
GV500 Manage Tool User Guide
k
Step_1
cl i n l
u e t ia
Step_2
Q fide n
n
2.1.3 Main Server Setting
o
Step_1: Set report mode, main server, main server port, and SMS gateway in this window. For
the meanings of these parameters, please refer to the “GV500 @Track Air Interface Protocol”.
C
Step_2: Click “Check if main backend server is available” to check if main server IP and port are
valid in network. If the result is ERROR, please check the server connection. You can not get
report from server if there is server connection problem.
TRACGV500MT002 - 15 -
GV500 Manage Tool User Guide
Step_1
i n k
l l
Step_2
e c t ia
u n
Step_3
Q fide
2.1.4 Fixed Time Report Setting
Step_1: Set check interval, send interval, and discard no fix in this window. For the meanings of
these parameters, please refer to the “GV500 @Track Air Interface Protocol”.
o n
Step_2: Click “Next”.
C
TRACGV500MT002 - 16 -
GV500 Manage Tool User Guide
Step_1
i n k
cl ia l
u e n t
Step_2
Q fide
2.1.5 Sending Command to Device
Step_1: Click “Send Command”. Commands AT+GTBSI, AT+GTSRI, and AT+GTFRI will be sent to
the device.
o n
Step_2: If the settings are downloaded successfully, the result returns OK. Click “OK”, the result
windows will be closed. Quick setting is completed.
C
TRACGV500MT002 - 17 -
GV500 Manage Tool User Guide
i n k
cl ia l
u e n t
Step_1
Q fide
o n
Step_2
C
TRACGV500MT002 - 18 -
GV500 Manage Tool User Guide
The Manage Tool is developed based on the @Track Air Interface Protocol. Please refer to
“GV500 @Track Air Interface Protocol” for details.
The following shows a general procedure to configure the device with the Manage Tool.
k
Step_1
Step_4
cl i n l
e ia
Step_2
u n t Step_3
Q fide
Step_5
n
Step_1: Select “Bearer Setting Information”. After that, the parameters of AT+GTBSI are shown in
o
Command Operation Space.
C
Step_2: The command message which shall be sent to GV500 will be generated based on input
and displayed here. Please note this command message can also be sent to GV500
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GV500 and edit settings based on them.
Step_4: Set APN parameters. Please refer to “GV500 @Track Air Interface Protocol” for the
meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of AT+GTBSI to GV500.
Note:
The parameters of AT+GTSRI and AT+GTBSI will be changed when the parameters of AT+GTQSS
change.
TRACGV500MT002 - 19 -
GV500 Manage Tool User Guide
Step_1: It is recommended to read all configurations from device before saving the configuration.
Select “Read All Configuration””Read From Device”.
Note: The command AT+GTDAT will not be read when clicking “Read From Device”.
i n k
l l
Step_3: Select a folder, type in the name of configuration file, and then click “Save” button.
e c t ia
u
Q fide n
o n
C
Step_4: Saved successfully.
TRACGV500MT002 - 20 -
GV500 Manage Tool User Guide
Note: The Manage Tool will generate a configuration file with parameter configuration and
an .ini file with AT command (which MT has saved except AT+GTORR and AT+GTRTO). The name
k
of the .ini file is composed of configuration file name and “_at”.
For example, if you click “Save All Configuration” and type in the name of configuration file with
n
“gv500”, it will generate “gv500.gv500” and “gv500_at.ini”.
l i
It is recommended to save all configurations before sending the AT+GTCFG command or sending
l
all commands. This is because the AT+GTCFG command can change password which makes
c a
situation complicated.
e t i
2.4. Load/Send All Configurations
u n
Step_1: Before sending all configurations, please load the configuration file or set all parameters
Q fide
in commands. To load configuration file, please select “Read All Configuration” ” Load
Configurations From File”. Then select the configuration file you need.
o n
C
TRACGV500MT002 - 21 -
GV500 Manage Tool User Guide
Step_2: You can set the parameters in commands based on the configuration file, and then click
k
“Send All Configuration” in toolbar.
l i n
Note: The commands AT+GTORR and AT+GTRTO will not be sent when clicking “Send All
l
Configuration”.
e c ia
Step_3: The Manage Tool will send all commands to the device.
u n t
Q fide
o n
C
Queclink
Green Liang
2020.11.05
TRACGV500MT002 - 22 -