Professional Documents
Culture Documents
Procedures For BLE KeyFob
Procedures For BLE KeyFob
REQUIREMENTS
Operation
1. Master Tag in Sleep Mode wakes up in very low power mode to scan for Slave BLE
Devices within range. Green LED Blink every 6 secs.
3. When the connection is lost to the slave device and the (0x00) char value didn't change
to (0x01),
- The Master should buzz continuously
5. Once the (0x00) char value changes to (0x01), the master device should;
- Beep one time
- Disconnect and Self-Low Sleep Mode.
Char Value 0x07
Pairing Mode
1. When master device detect battery level is less than 20%, after Master receive char
value read 0x01 from all Slave devices Master device shall long beep two times before
self power off.