PHANTOM SLIDE LEVER INSTRUCTION V1.00
PHANTOMS BASE4F AAV 1.00
The Slide Lever can be used for gimbal ti
BUETIATSIDe Mim.
1. Remove the screws on the back of the Transmitter to open
control.
the rear cover. Fig] shows the Mount position.
VPRO, TF, seat,
2. (Fig.2) Peer off the sticker on double-sided tape. (Fig.3) Mount
the Slide Lever with the screw (M2.0x4.5), Thread locker is not
recommended. Make sure the Slide Lever can slide smoothly.
ELMO, HERR, BMRA
M20x4 SRE, ARNEL. iRTRRNORTIRAT STO
ia.
3. Make sure the Slide Lever is in the correct position (Fig.4)
and the cross-head is properly fitted into the cross-lot (Fig)
and then reinstall the rear cover and fix the screws to finish
the installation. You can confirm the correct instalation in
Assistant software: Basic->RC->Sticks Monitor.
ACRRETRE EM (ARs) IN ARAF SRE TE NAA
UREA (G0KRS) , PERRI TR
#, RARE, DIMER: He BSE wT
MoM RRBAOK.
ig.1 Mount position
By Seat
Fig2 Use double-sided tape
Ha FARINA
Fig3 Mount the Slide Lever Pasa eanyseet
dhs
Fig Correct Installation
Aa ERT
Figs Assembly detail
Ais Rae BR