Adjustment at ETB Replacement
‘When replacing the ETB, be sure to execute the following adjustment.
1) Clear the ETB control counter (COPIER>FUNCTION>CLEAR>TR-BLT).
(Parts counter (COPIER>COUNTER>DRBL-1>TR-BLT) is also cleared coincidentally.)
CAUTION:
To keep the rotation speed of the ETB constant, adjust the rotation speed of the ETB Drive Motor
according to the life of the ETB.
Without clearing the ETB control counter when replacing the belt, rotation speed difference between
the drum and the ETB causes an image error.
ETB3CiR 5 O shal 32
I
ETBARA ICIS, YS PCMBERMI Soe.
1) ETB#IIA 42 F (COPIER>FUNCTION>CLEAR>TR-BLT) £7 U7 SS.
(BERYL B (COPIER>COUNTER>DRBL-1>TR-BLT) £B8LTIUT SENS, )
ze
ETRO BRE — EI BRS tS te
BLTWS,
AIL bREFICETB HAD LS EDU LEWE. KOLO ETRONREEE
Ik UBSFRORALES.
. ETBOMAIN C TETBESE— 9 —O MERE Se
Ee
PRINTED IN JAPAN, PUB No. F-IM-6781-000