Professional Documents
Culture Documents
VERSION 1.0
FOUNDATION F B T OOL S ME
smar
web: www.smar.com
Specifications and information are subject to change without notice.
For the latest updates, please visit the SMAR website above.
Introduction................................................................................................................................................. 1
How to download...................................................................................................................................... 1
Firmware ............................................................................................................................................. 1
Field Devices............................................................................................................................................ 2
III
FBTools - User’s Manual
IV
FBtools
Introduction
FBTools is an utility software used to perform Firmware Download on any Smar Fieldbus
equipment:
• PCI cards
• Field Devices
• Fieldbus Modules
This allows the user to upgrade the firmware (executable program installed in the FLASH
memory) of the equipment using the latest versions provided in SMAR Web Site:
www.smar.com
The firmware can be downloaded while the equipment is installed and turned on. It is not
necessary to turn off or remove the equipment before downloading the firmware.
• New firmwares can be incompatible with old Fieldbus systems, and vice versa. Please
contact Smar Technical Support if you are not sure about the compatibility with your
current Fieldbus system (Syscon, PCI, LC700, Field Devices, FB700, etc.)
Warning
• Part of the fieldbus equipment functionality WILL STOP (Function Blocks execution,
links, supervision, scheduling, Fieldbus communication, etc.) while its firmware is being
downloaded.
• Before proceeding to the next step, CERTIFY THAT YOUR PROCESS WILL BE
STABLE under any condition described in this procedure.
2. Depending on the chosen device (PCI Card, Field Device or Fieldbus Module), follow
the specific steps.
1
User’s Manual
PCI Cards
1. Choose a card.
2. Select and open a PCIxxyyy.ABS file (where xx is the PCI card version – e.g. 11, and
yyy is the protocol – e.g. FF).
Notes:
• FBTools uses the PCI settings (I/O Port and Interrupt) configured with the ItfSetup.exe
application.
• FBTools identifies installed cards as UNKNOWN if the PCI hardware version is not
valid or supported. This may be caused by I/O conflicts between PCI and other cards
on the PC bus. If you experience this problem, change the PCI I/O Port to a free
address range, using ItfSetup.exe.
Field Devices
• LD302
• TT302
• IF302
• FI302
• FP302
• FY302
• FB302
• TP302
2. Connect the FDI302 (Firmware Download Interface) to the PC serial port chosen in
item 1.
3. Select and open a <name>.ABS file (where <name> is the Field Device name - e.g.
LD302).
Notes:
1. Certify that no other application or resident program in the PC is using the I/O port or
IRQ of the selected serial port.
2. After resetting, the Field Device will automatically execute a factory initialization
procedure (Fact Init appears on the display), if necessary.
2
FBtools
Fieldbus Modules
• FB700
Notes:
1. Certify that no other application or resident program in the PC is using the I/O port or
IRQ of the selected serial port.
2. After resetting, the FB700 will automatically execute a factory initialization procedure
(yellow led will turn on), if necessary.
3
User’s Manual