and Function: Restoration of an Immediately Stabilized and
Functioning Maxillary Left Central Incisor Implant with an Integrated Abutment Crown™ This case demonstrates the immediate stabilization and functioning of a maxillary left central incisor implant with its aesthetically challenging restoration with an Integrated Abutment Crown™.
1. Preoperative radiograph.
2. Operative site immediately after the placement of a
5.0 mm x 8.0 mm HA coated implant.
3. Shouldered depth gauge indicating that an abutment
with a 4.0 mm shoulder height would be appropriately positioned below the gingival crest.
4. Primer agent being applied.
5. Bonding agent being applied.
6. Light curing of bonding agent.
7. A 5.0mm x 4.0mm shouldered abutment being
inserted with only finger pressure into the well of the implant.
8. A 5.0mm x 4.0mm shouldered abutment seated with
only finger pressure into the well of the implant.
9. Short 5.0mm wide acrylic sleeve being inserted onto
the 5.0mm wide stealth abutment.
10. Wide acrylic sleeve snapped onto shouldered
abutment.
11. Vacuum formed template placed over acrylic sleeve
indicating the need to reduce its buccal profile. 12. Acrylic sleeve being modified.
13. Transitional stabilizing prosthesis bonded to adjacent
teeth.
14. Radiograph of integrated implant five weeks after
implant placement.
15. Bonded stabilizing prosthesis prior to its being
removed at the patient’s second clinical visit.
16. Shouldered abutment after removal of bonded
prosthesis.
17. Implant well and soft tissue sulcus after removal of
stealth abutment. 18. White 3.0 mm plastic impression post receiving its mandatory seating tap.
19. Impression material being injected around seated
impression post.
20. Digital image being taken of shade guide against a
black metal background to facilitate the fabrication of an aesthetic Integrated Abutment Crown™.
21. Transitional crown re-inserted after the making of an
implant level impression.
22. Integrated Abutment Crown™ on stone model.
23. Mirror view of Integrated Abutment Crown™.
24. Integrated Abutment Crown™ being inserted.
25. Floss being used to confirm the fact that the inter- proximal contacts are passive and will not interfere with the engagement of the locking taper.
26. Plastic temporary abutment mounted on a straight
driver to seat the Integrated Abutment Crown™ in the long axis of the abutment shaft and implant well to engage the locking taper.
27. Post-operative radiograph of seated Integrated
Abutment Crown™.
28. Left profile view of seated Integrated Abutment
Crown™. 29. Right profile view of seated Integrated Abutment Crown™.
30. Fifteen months post operative radiograph.
31. Patient’s smile fifteen months post insertion.