BENCHMARK
| 7.260 #9 1
Park mM sag
GPmark™ DETAIL _ Xmark* DETAIL (BOX CONNECTION LENGTH)
0063, [= = See BENCHMARK
See Note 2 3.063 Min.
PRIMARY WAKE-UP SHOULDER Pit Fee Zone
(SEAL) See Note 6
Bevel dia.
_.| 0.125 ~ { \
See Note 2 /
62721 #HNe ose Note™S
Bevel Dig SECONDARY MAKE-UP SHOULDER
(MECHANICAL STOP) \ .
6.566 Min 5.940 40.031 5384 Re
NOTES: Outside Dia Core Dia Cyindtical Dia
1. Lead tolerance: See Note 4
a. For 2 inches 40.006 inch
b. Recut threads if stretch exceeds 0.006 inch in 2 inches. |
2. Either benchmark type is applicable but not both 1 |
a. GPmark: 0.125 is new condition, shall be 0.062 min. after refacing.
b. Xmark: 0.065 is new condition. After refacing a visible step
‘on the benchmark shall remain on the primary shoulder.
Rethreading is required if there is no visible benchmark.
0.513 Win |
Thread taper 0.750" per tt
35 Threads per inch
3. At Outside Diameter less than 6.781, Bevel Diameter is void
and 1/32" x 45° becomes effective. 1 7? len ee tet
4, Minimum 0.D. based on wall thickness at counterbore. Larger 0.. cece 3
may be required for specific grade. performance.
5, Surface firish requirement only apples during refacing operation
6. Area of the connection where pitting is not permed in the thread roots
S/SRSERSE, owensions wneout |
Resigned To IEESESSS "| ‘rant Prideco | Mey) TOLERANCES ARE FoR XI™ 97 Box
SRRESSS= eererence FIELD INSPECTION DIMENSIONS
By ees ees INFORWATION ONLY
Bere Pwo 6/24/99 Tae er co
Date: kb Blselstels a ne 10915 Tot [07