Professional Documents
Culture Documents
PROPOSED SYSTEM
Home automation and security based on Raspberry Pi voice recognition. There are two aspects to the project:
software and hardware. The hardware's input command is voice, which means you can control your home
appliances with your voice. A Raspberry Pi, Bluetooth module, Relay 1, Relay 2, Relay 3, Wi-Fi router, Relay
circuit board, 5v power supply, Fan, T.V, Bulb and Android smartphone are included. Primary programming
language is Python.
2. POWER SUPPLY
3. OWER SUPPLY
RASPBERRY PI
SOFTWARE REQUIREMENT
1. Voice controlled home automation mobile app
2. Python, JAVA, PHP app development
3. RASPBERRY Pi (Software)
4. VNC VIEWER
TO build the ip address
Figure
VI. RESULTS
Controlling home appliances through voice andproviding security to the home
Figure
Advanced IP Scanner
Advanced IP Scanner shows all network devices.
Figure
www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science
[1844]
e-ISSN: 2582-5208
International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:04/Issue:05/May-2022 Impact Factor- 6.752 www.irjmets.com
Voice controlled app's login is determined by the user's login Id and password by using VNC viewer software.
Figure
HARDWARE IMPLEMENTATION
Figure
Circuit Diagram
Figure
Final IMPLEMENTAION
Users can turn on/off all lights in a room or the entire house instead of manually going into each room.
Voice commands can be used to control home equipment. The module is connected to a smartphone through
Bluetooth. The relay is used to switch the load when someone says "LIGHT Off" or "LIGHT ON. The relay is
powered by the Raspberry Pi, which also serves as the system's main microcontroller. Moving on to the
software we utilize, the Voice controlled app's login is determined by the user's login Id and password by using
VNC viewer software. As a result, the system becomes more secure and controllable. As a result, we may
conclude that the system is functioning properly and according to plan. The system takes more than a minute to
calculate the exact result.
www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science
[1845]
e-ISSN: 2582-5208
International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:04/Issue:05/May-2022 Impact Factor- 6.752 www.irjmets.com
Figure
‘Press to speak button‘
This button connects our mobile app directly to Google, enabling voice recognition within the app. Because
we've chosen Google for voice recognition, pushing this button will activate the voice sensors via the mobile
app, and the message will be sent to the Google app.
VII. CONCLUSION
This project focuses on the most critical features that might be used to create a complete smart home
environment. The Raspberry Pi-based voice-controlled home automation sys tem is intended to make it easier
for elderly and disabled persons to use and operate electronic gadgets. This project provides a basic home
automation system that may be readily deployed and utilized . This system allows users to make decisions and
control household appliances via an android application, making life more convenient while also being re
motely accessible via portable devices such as Android phones.
VIII. REFERENCES
[1] Al-Ali, Al-Rousan, “Java based home automation system”, IEEE trans- action on consumer electronics,
vol.50, no2, pp.498-504,May 2004.
[2] Yenogkwan Kang, Sunghoi Park et.al “IoT Based monitoring systems using Tri-level context making
model for Smart Home Services”, 2015 IEEE International conference on consumer Electronics9(ICCE),
2015.
[3] Hirajsunehra, M.Veena, “Implementation of interactive home automation systems based on Email and
Bluetooth technologies”, 2015 International Conference On Information Processing”, Vishwakarma
Institute of Technology, Dec 16-19,2015.
[4] J.Jeyapadmini, K.R.Kashwan, “Effective Power Utilization and conservation in Smart Homes Using IoT”,
2015 International Conference on computation of power ,Information and Communication, 2015.
[5] Jasmeetchhbra, Punita Gupta, “IoT based smart home design using power and security management
system”,2016 1st International Conference on Innovation and challenges in cyber security (ICICCS)
2016.
[6] Kumar Mandula et.al, ”Mobile based Home Automation using Internet of Things(IoT)”, 2015
International Conference on Control Instrumentation, Communication and Computational Technologies
(ICCICCT), 2015.
[7] N Sriskanthan, F. Tan and A. Karande, ”Bluetooth based home automation system”, Microprocessors
and Microsystems, Vol. 26, no. 6, pp. 281-289, 2002.
[8] NazmulHasanet.al ,”Design and Implementation of Touchscreen and Re- mote Control Based Home
Automation System”,2013 2nd International Conference on Advances in Electrical Engineering,2013.
[9] Rakesh k. Deore et.al (2015), “Internet of Things Based Home Appli- ances Control”, International
Conference on Intelligence CommunicationNetworks, 2015.