Professional Documents
Culture Documents
Proton PHM 050
Proton PHM 050
Proton PHM 050
DESCRIPTION
PROTON PHM 050 is a 0.50mm thick Heat Sink Mounting Tape. It is electrically insulator in nature. The
product is white in colour.
APPLICATIONS
-Mounting heat sink for LCD and PDP
-Bonding IC package and heat sink.
-Mounting heat sink for CPU, GPU, LED, Power transistors.
PRODUCT BENEFITS
-Good Thermal conductivity
-Service Temperature 10°C to 80°C (continuous)
-Short Term (30 minutes) Temperature performance Range -10°C to +120°C
-Consisting of a high quality pressure sensitive adhesive
-Very good Ultra violet Light resistance
-Resistance to abrasion, corrosion and moisture
-Clean to use
TECHNICAL PROPERTIES
TEST UNIT VALUE TEST METHOD
Thickness mm 0.5
Color White
Tensile Strength kg / cm 0.6 ASTM - D412
Elongation % 750 ASTM - D412
Peel Adhesion (After 30 minutes) kg / 25mm 2.3 ASTM - D3330
Shear Adhesion (After 30 minutes) kg / cm² 5.5 ASTM - D1002
Holding Power hours > 24 1 kg / inch @ 60 °C
Thermal Conductivity W / m.K > 1.25 ASTM - C518
Thermal Impedance in².C / W 1.2
Dielectric Strength kV 5.0 ASTM - D149
Shelf Life 1 year When stored at 21°C
RECOMMENDATIONS
Surfaces must be clean, dry, free from grease and dirt. Ideal bonding substrates are those which are clean, dry, flat, smooth, dust free and non-
porous. Shelf life of 1 year. Life expectancy will vary with temperature and humidity of storage. Ideal storage conditions are 21 °C and 50%
relative humidity, away from direct sunlight. Customers are recommended to make their own assessment of our products under their own
conditions, for their own requirements. All information and properties are obtained from the tests on which we believe. These values are
presented for comparison purposes and do not represent a guarantee by the manufacturer.