Professional Documents
Culture Documents
M-Series: Submittal Data: Pead-A15Aa7 & Suz-Ka15Nar1
M-Series: Submittal Data: Pead-A15Aa7 & Suz-Ka15Nar1
Job Name:
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
SPECIFICATIONS: PEAD-A15AA7 & SUZ-KA15NAR1
Power factor % 96
Power factor % 96
SEER 18.6
EER1 12.5
ENERGY STAR® Certified (ENERGY STAR products are third-party certified by Yes
an EPA-recognized Certification Body.)
MCA A 1.69
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
SPECIFICATIONS: PEAD-A15AA7 & SUZ-KA15NAR1
W: In. 45-5/16
H: In. 13-7/16
Indoor unit operating Cooling Intake Air Temp (Maximum / Minimum) °F 90 DB, 73 WB / 66 DB, 59 WB
temperature range Heating Intake Air Temp (Maximum / Minimum) °F 82 DB / 50 DB
MCA A 12
MOCP A 15
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
SPECIFICATIONS: PEAD-A15AA7 & SUZ-KA15NAR1
Type R410A
Refrigerant
Charge Lbs, oz 2, 9
Notes
*Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.
**System cuts out at -7ºF (-21.7ºC) to avoid thermistor error and automatically restarts at -4ºF (-20ºC).
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
ACCESSORIES: PEAD-A15AA7
IT Extender □ PAC-WHS01IE-E
MegaBlue Advanced Blue Diamond Condensate Pump w/ Reservoir & Sensor □ X87-835 - 110 to 250V
Advanced Blue Diamond Mini Condensate Pump w/ Reservoir & Sensor (208/230V) [recommended] □ X87-721 - 208/230V
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
ACCESSORIES: SUZ-KA15NAR1
Heavy Duty Wall Mounting Bracket — 316 Series Stainless Steel □ QSWBSS
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
DIMENSIONS: PEAD-A15AA7
Opposite piping 378(14-15/16) 153(6-1/16) Note 1.Use an M10 screw for the suspension bolt
side view
Fresh air intake ø100(3-15/16) (field supply).
Drain pipe(O.D ø32(1-1/4) knock out hole 2.Keep the service space for maintenance
°
(Emergency drain) 120 Note 4 at the bottom.
Bottom 3-ø2.9(1/8) mount hole 3.This drawing is for PEAD-A24·30·36·42
200(7-7/8)
Inlet air AA7 models,which have 2 fans. PEAD-A09·
ø125 6)
40(1-5/8)
(5-3/8)
0°
-15/1
side view 12·15·18AA7 models have 1 fan.
135
12
(4
18(3/4) 210(8-5/16)
4.If the inlet duct is used,remove the air
15(5/8)
Top filter (supplied with the unit), then
2XE-ø2.9(1/8) install the filter (field supply) at the
suction side.
Outlet air Top
5.Heat air to 0°C (32°F) or higher when
side view view taking fresh air with a fresh air intake.
Air filter
D(Duct)
G
A
C
Air Air
outlet inlet
100(3-15/16)
Unit:mm(in.)
H±3(H±1/8)
J±3(J±1/8)
58(2-5/16)
40(1-5/8)
21(7/8)
30(1-3/16)
20(13/16)
23(15/16)
(Suspension bolt pitch) PEAD-A24,30AA7
66 ø15.88 ø9.52
57(2-1/4) 643(25-3/8) (2-5/8) (5/8) (3/8)
PEAD-A36,42AA7
732(28-7/8)
122(4-13/16)
32(1-5/16) 700(27-9/16)
23(15/16)
40(1-5/8)
250(9-7/8)
2X2-ø2.9(1/8)
178(7-1/16)
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
DIMENSIONS: SUZ-KA15NAR1
Unit: inch
REQUIRED SPACE Basically open 4 in. or more
without any obstruction in front
15-3/4 Drain hole 1-5/8 and on both sides of the unit.
1-3/4
Air in
e
mor
. or
12 ~ 12-3/4
4 in
13-9/16
4 in
Air in . or
11/16
mo
re
1-9/16 14
Air out in. o
re rm
r mo ore
2- 3/8 13/16 Oval hole 8 in. o
7/8 29/32 11-1/4 17/32
Open two sides of left,
handle right, or rear side.
21-5/8
11-1/32
6-23/32
5-15/16 19-11/16
31-1/2 2-23/32
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.