Professional Documents
Culture Documents
Counter Drone
Counter Drone
DDR-4 is an AESA system designed to Transmitter has discrete analog scanning only in
automatically detect and track flying objects in the elevation. By using onboard synchronization
mid-air area. The system may operate in mono- system, it is possible to combine the radars to
pulse and bistatic mode, with the ability to scan one working group up to 8 pc., with different
both in elevation and azimuth direction. Also, modes of operation. In the main configuration,
DDR-4 may works as a high-speed system using different antennas for receiving
communication system with beamforming. The (4x4) and transmitting (1x4) pass. The system
receiver of the system has fully digital scanning in implements a digital algorithm for the synthesis
the azimuth area and discrete analog scanning in and processing of signals based on state of the
elevation. arts approaches and components.
01-2020 | Page 1 of 3
"AIR SHIELD DDR-4"
Specifications
Parameter Condition Min Typ Max Units
Operating frequency range 5100 5900 MHz
EIRP 59 dBm
Beamwidth 12 °
elevation plane
Transmitter scanning angle 45 (optional to 90) °
(analog)
azimuth plane
45 (optional to 90) °
(none scan)
elevation plane
45 (optional to 90) °
(analog)
Receiver scanning angle
azimuth plane
45 (optional to 90) °
(digital)
Linear vertical (optional
Polarization
circular L/R)
Operating mode mono-pulse, bistatic
Output signal modulation type LFM (optional PRBC)
Transmitted pulse duration 0.1 10 µs
Transmitted pulse ratio 4
UAV detection range RCS 0.01 m2 30 3000 m
Bistatic grouping 8 pcs
Operating supply voltage range 19 36 V
Power consumption 160 W
Operating temperature range −40 … 50 °C
Overall dimensions (L × W × H) 725 × 360 × 182 mm
Weight without tripod 12 kg
01-2020 | Page 2 of 3
"AIR SHIELD DDR-4"
1 2 3 4 5 6 7 8
A
A (1 : 2) A
POWER
POWER SUPPLY
ETHERNET
B B
724,50
B
(1 : 2)
C REFIN C
A B
REFOUT
SYNC
D D
360 148,30
182
E E
Material: This drawing and any information or Description:
descriptive material set out on it
are the confidential and copyright property and
MUST NOT BE DISCLOSED, COPIED, LOANED
Finish: in whole or part or used for any purpose without
the written permission.
254 Drawn by: Drawn Date:
Unless Otherwise Stated:
Linear Tol.: 0.2, Angular Tol.: 0 15' Document Type:
All Dimensions: mm
Checked/Approved by: Checked/Approved Date:
318 Drawing Scale:
1:5
Approx Weight: Drawing Produced In Legal Owner: Part Number:
12 Kg Accordance With: BS8888
F Projection Method: Sheet Size: Drawing Number: Sheet: Revision: F
THIRD ANGLE
A3 1 of 1
1 2 3 4 5 6 7 8
01-2020 | Page 3 of 3