Professional Documents
Culture Documents
Pinout ................................................................................................. 4
Warranty ...................................................................................... 15
2 FMB003 | Wiki
Know your device
3 FMB003 | Wiki
Pinout
Table 1 OBDII pinout
4 FMB003 | Wiki
Set up your device
How to insert Nano-SIM card and
connect the battery
1. Open the top cover of the device. Cover is opened by unclipping
it at the recessed corner.
2. Insert Nano-SIM card as shown with PIN request disabled or
read our Wiki how to enter it later in Teltonika Configurator.
Make sure that Nano-SIM card is fitted properly into the tray.
Figure 3 Device case removal Figure 4 Nano-SIM card insert
3. Connect the battery as shown to device.
4. After configuration, see “PC Connection (Windows)”, attach
device cover back.
5 FMB003 | Wiki
PC Connection (Windows) Setup will continue installing the driver and eventually the
confirmation window will appear. Click Finish to complete the
setup.
1. Power-up FMB003 with DC voltage (10 – 30 V) power supply
using supplied power cable. LED’s should start blinking, see
“LED indications”.
2. Connect device to computer using Micro-USB cable or
Configuration (Windows)
Bluetooth connection: At first FMB003 device will have default factory settings set. These
• Using Micro-USB cable settings should be changed according to the user's needs. Main
▬ You will need to install USB drivers, see “How to install configuration can be performed via Teltonika Configurator
USB drivers (Windows)” software. Get the latest Configurator version from here.
• Using Bluetooth Configurator operates on Microsoft Windows OS and uses
▬ FMB003 Bluetooth is enabled by default. Turn on prerequisite MS .NET Framework. Make sure you have the correct
Bluetooth on your PC, then select Add Bluetooth or version installed.
other device > Bluetooth. Choose your device named –
Table 2 MS .NET requirements
“FMBxxx_last_7_imei_digits”, without LE in the end.
Enter default password 5555, press Connect and then MS .NET REQUIREMENTS
select Done. Operating MS .NET Framework
Version Links
3. You are now ready to use the device on your computer. system version
Windows Vista
6 FMB003 | Wiki
Various Status window tabs display information about GNSS,
GSM, I/O, Maintenance and etc. FMB003 has one user editable
profile, which can be loaded and saved to the device. After any
modification of configuration the changes need to be saved to
device using Save to device button. Main buttons offer following
Figure 7 Language selection
functionality:
Configuration process begins by pressing on connected device
(Figure 8 Device connected via USB). 1. Load from device – loads configuration from device.
default.
7 FMB003 | Wiki
Default configuration settings
Quick SMS configuration Movement and ignition detection:
Default configuration has optimal parameters present to ensure Vehicle movement will Ignition will be detected
best performance of track quality and data usage. be detected by by vehicle power voltage
accelerometer between 13,2 – 30 V
Quickly set up your device by sending this SMS command to it:
Device makes a record On Moving if one of these events happen:
" setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
300 seconds passes Vehicle turns 10 degrees
Note: Before SMS text, two space symbols should be inserted.
Speed difference
GPRS settings:
Vehicle drives 100 between last coordinate
• 2001 – APN meters and current position is
• 2002 – APN username (if there greater than 10 km/h
are no APN username, empty Device makes a record On Stop if:
field should be left) 1 hour passes while
• 2003 – APN password (if there vehicle is stationary
and ignition is off
are no APN password, empty
field should be left) Records sending to server:
If device has made a
Server settings:
record it is sent to the
• 2004 – Domain server every 120
• 2005 – Port seconds
• 2006 – Data sending protocol After successful SMS configuration, FMB003 device will
(0 – TCP, 1 – UDP) synchronize time and update records to configured server.
Time intervals and default I/O elements can be changed by using
Teltonika Configurator or SMS parameters.
8 FMB003 | Wiki
Mounting recommendations
• Connecting the device to the vehicle:
▬ Find OBDII connector in your vehicle (Figure 7. Most
common OBDII connector locations.).
9 FMB003 | Wiki
LED indications Basic characteristics
Table 3 Navigation LED indications Table 5 Basic characteristics
10 FMB003 | Wiki
Bluetooth LE: -9.43 dBm (Maximum SIM Nano-SIM
out EIRP)
Memory 128MB internal flash memory
GPRS Multi-Slot Class 12 (up to 240
Data transfer PHYSICAL SPECIFICATION
kbps)
Dimensions 52.6 x 29.1 x 26 mm (L x W x H)
Data support SMS (text/data)
OPERATING ENVIRONMENT
POWER Operating temperature (without
-40 °C to +85 °C
12 - 30 V DC with overvoltage battery)
Input voltage range
protection Storage temperature (without
-40 °C to +85 °C
Back-up battery 3.7 V 45 mAh battery)
At 12V < 5 mA (Ultra Deep Sleep) Operating humidity 5% to 95% non-condensing
Battery charge temperature +10 °C to +45 °C
At 12V < 7 mA (Deep Sleep)
Battery discharge temperature -20 °C to +60 °C
Power consumption At 12V < 7 mA (Online Deep Sleep)
-20 °C to +45 °C for 1 month
At 12V < 8 mA (GPS Sleep) Battery storage temperature
-20 °C to +35 °C for 6 months
At 12V < 28 mA (nominal with no load)
FEATURES
Internal fuse 3A, 125V
Sensors Accelerometer
BLUETOOTH Green Driving, Over Speeding
Specification 4.0 + LE detection, Jamming detection, GNSS
Temperature and Humidity sensor, Fuel Counter, Excessive Idling
Scenarios
Supported peripherals Headset, Inateck Barcode Scanner, detection, Unplug detection, Towing
Universal BLE sensor support detection, Crash detection, Auto
OBD INTERFACE Geofence, Manual Geofence, Trip
Data K-Line, CAN Bus data GPS Sleep, Online Deep Sleep, Deep
Sleep modes
Up to 32 vehicle onboard parameters, Sleep, Ultra Deep Sleep
Data reading
9 supported OBD protocols FOTA Web, FOTA, Teltonika
11 FMB003 | Wiki
Accelerometer, External Power
Ignition detection
Voltage, Engine RPM
12 FMB003 | Wiki
Safety information Please consult representatives of your vehicle
model regarding OBDII location on your vehicle. In
case you are not sure about proper connection,
This message contains information on how to operate FMB003
please consult qualified personnel.
safely. By following these requirements and recommendations,
you will avoid dangerous situations. You must read these The programming must be performed using a PC
instructions carefully and follow them strictly before operating the with autonomic power supply.
device!
Installation and/or handling during a lightning
• The device uses SELV limited power source. The nominal storm is prohibited.
voltage is +12 V DC. The allowed voltage range is +10…+30 V DC.
• To avoid mechanical damage, it is advised to transport the
The device is susceptible to water and humidity.
device in an impact-proof package. Before usage, the device
should be placed so that its LED indicators are visible. They
show the status of device operation. Teltonika is not responsible for any harm caused
• Before mounting device make sure that a ≥3A fuse is present on OBD by wrong cables used for connection between PC
connector power supply. and FMB003
• Before unmounting the device from vehicle, ignition MUST be
WARNING! Do not use FMB003 device if it distracts
OFF.
driver or causes inconvenience due to OBDII
Do not disassemble the device. If the device is placement. Device must not interfere with driver.
damaged, the power supply cables are not
Battery should not be disposed of with general
isolated or the isolation is damaged, DO NOT
household waste. Bring damaged or worn-out
touch the device before unplugging the power
batteries to your local recycling center or dispose
supply.
them to battery recycle bin found in stores.
All wireless data transferring devices produce
interference that may affect other devices which
are placed nearby.
13 FMB003 | Wiki
Certification and Approvals
• FMB003 CE / RED
• FMB003 E-Mark
• FMB003 EAC
• FMB003 RoHS
• FMB003 REACH
• FMB003 Declaration of IMEI assignment
• FMB003 Declaration of device operation temperature
14 FMB003 | Wiki
Warranty Warranty Disclaimer
TELTONIKA guarantees its products to be free of any TELTONIKA PRODUCTS ARE INTENDED TO BE USED BY PERSONS
manufacturing defects for a period of 24 months. With additional WITH TRAINING AND EXPERIENCE. ANY OTHER USE RENDERS
agreement we can agree on a different warranty period, for more THE LIMITED WARRANTIES EXPRESSED HEREIN AND ALL
detailed information please contact our sales manager. IMPLIED WARRANTIES NULL AND VOID AND SAME ARE HEREBY
EXCLUDED. ALSO EXCLUDED FROM THIS LIMITED WARRANTY
Contact us teltonika-gps.com/about-us/contacts/ ARE ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES
INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR REVENUE,
All batteries carry a reduced 6 month warranty period.
LOSS OF TIME, INCONVENIENCE OR ANY OTHER ECONOMIC
If a product should fail within this specific warranty time, the LOSS.
product can be:
More information can be found at teltonika-gps.com/warranty-
• Repaired repair/
• Replaced with a new product
• Replaced with an equivalent repaired product fulfilling the same
functionality
• TELTONIKA can also repair products that are out of warranty at
an agreed cost.
15 FMB003 | Wiki