Professional Documents
Culture Documents
FEATURES 8MTL300
ACCESSORIES INFORMATION
Base plate for mechanical interface Not required; granite recommended
XY stack Directly stackable
Z configuration Not available
ADDITIONAL DETAILS
Dimensions of moving platform (W × L) mm 310×310
Stage dimensions (W × L × H) mm 805×390×120 905×390×120 1005×390×120 1205×390×120
Measurement system Metric
Orthogonality 11) µrad/arcsec 24 / 5
Protection level 13) From solid particles and spray
RoHS Compliant
Weight kg 45.5 50.5 55.5 60.5
120
personal interpolation.
780 2) Absolute Accuracy & Bi-Directional Repeatability
805 measurements processed by Zygo ZMI 501
A Michelson laser interferometer.
310 3) Pitch & Yaw measurements are processed by
M6x11 deep 275 M8x14 deep 11D-ALI-COL electronic autocollimator. Resolution
110 sk. 50 13 holes of 11D-ALI-COL: 1 µrad. Environment error: 1 µrad.
4) Maximum Velocity is electrically limited by encoder
and driver CUT-OF frequency; maximum velocity is
also limited by guiding system.
100
150
200
5) Maximum Acceleration is limited by Drivers` Peak
380
390
Current, Motors` Peak Current and External Load
(inertia). Please contact Standa for explanation.
6) Load Capacity is limited by position of load and
integrated guiding system. Please contact Standa
for loading calculation.
7) Moving Mass is constant parameter of system
M8x20 which characterize m0 or inertia of unloaded
8 holes system.
View A 8) Recommended controllers & Recommended drivers
300 For M6 screws
8 holes can be optimized for a certain application. Plaese
250 contact Standa for recommendation.
200
9) Recommended power supply depends on required
duty cycle and load. Please contact Standa for
recommendation.
275
300
8MTL220
8MTL220 XY
FEATURES Direct Drive Linear Translation Stage of series 8MTL220 are based
on 3 phase ironless linear brushless servo motor technology. Direct
ዧ Travel ranges: 400, 500, 600, 1000 mm drive technology allow user to reach zero backlash motion with
high accuracy, repeatability, motion stability and low friction. In
ዧ Resolution: up to <0.31 nm
order to proof precision of stage and imitate working condition,
ዧ Direct drive zero backlash system Standa provides measurement reports in both: disassembled and
ዧ High resolution non-contact optical assembled conditions (if required with load of customer).
incremental encoder Linear non-contact optical encoder as a feedback system
ዧ Bidirectional repeatability: <±0.5 µm guarantees direct control of position with sub-nanometer resolution
(±0.25 µm RMS) of motion.
Naturally aged aluminum alloy guaranties high temperature
ዧ Maximum velocity: 2000 mm/s
stability, softness of 8MTL220 instruments and excellent long
ዧ Maximum acceleration: 20000 mm/s2 period kinematics without drift of guide system. Moving rotor
ዧ High accuracy linear guide and carriage design allows taking maximum efficiency from the ironless motor
system with caged balls and generating rapid and smooth motion profiles. Special guiding
system with caged recirculating balls ensures long last precision of
ዧ Accuracy: <±1.00 µm
stage.
ዧ Long life performance guaranteed Translation stages of series 8MTL220 can be prepared for
ዧ Easy integration with metric/imperial clean rooms and vacuum up to 10-3 torr with small changes. For
opto-mechanical systems higher vacuum please contact Standa. Additional requirement of
cleanliness could be requested separately.
ዧ Multy axes system with 5 arcsec
orthogonality is available Motorized translation stage can be easily connected to standard
imperial/metric optical table directly. XY scanning stages can
ዧ Can be applied to industry applications
be directly assembled without using any connecting plates. For
like: laser cutting, scribing, drilling,
extreme orthogonality please contact Standa separately.
marking
Motion control of 8MTL220 series translation stages is available
ዧ Systems is equiped with protection with Standa or ACS motion Controllers & Drivers.
from dust and spray
For light industry applications 8MTL220 stages can be supplied
ዧ All measurement reports are included mounted on standard optical table or extremely flat granite plate.
by default! 8MTL220 have passive (belt protection) and active (compressed
ዧ Cables Can be customized for different air channels) protection from spray and dusts, which allows stage
OEM electronics to be applied in fabrication processes.
ACCESSORIES INFORMATION
Base plate for mechanical interface Not required
XY stack Directly
Z configuration Not available
ADDITIONAL DETAILS
Dimensions of moving platform (L×W), mm 225×225
Overall linear stage dimensions (L×W×H), mm 780×297.5×100 880×297.5×100 980×297.5×100 1317×297.5×100
Measurement system Metric / Imperial
Orthogonality (XY configuration) 11), µrad / arcsec 24 / 5
Protection level From solid particles and spray
RoHS Compliant
Weight, kg 37 41.5 46 64
100
780
A
225
M6x10 deep 200 M8x12 deep
61 holes 50 6 holes
100
150
200
300
310
View A
300
250 for M6 screws
M8x14 deep 200
8 holes 12 holes
200
220
8"
508(20")
for (1/4-20) screws
6 clearance slots 550
600
8MTL220-400-LEn1
100
980
100
A 200
185
225
M6x10 deep 200 M8x13 deep
59 holes 50 6 holes
8MTL220-600-LEn1-XXX
150
100
200
297,5
309
View A
550
300
370
980
250
M8x14 deep 200 for M6 screws
12 holes 12 holes
200
220
8"
220
600 295
28" 980
for (1/4-20) screws 850
10 clearance slots 900
8MTL220-600-LEn1
FEATURES
ዧ Travel range: 200, 300, 400 mm
ዧ Resolution: up to <0.31 nm
ዧ Direct drive zero backlash system
ዧ High resolution non-contact
optical incremental encoder
ዧ Bidirectional repeatability:
±0.50 µm (<±0.25 µm RMS)
ዧ Maximum velocity: 2000 mm/s
ዧ Maximum Acceleration:
20000 mm/s2
ዧ High accuracy linear guide and
carriage system with recirculating
balls Direct Drive Linear Translation Stage of series 8MTL165 is based
on 3 phase ironless linear brushless servo motor technology. Direct
ዧ Accuracy: <±1.00 µm
drive technology allow user to reach zero backlash motion with
ዧ Long life performance guaranteed high accuracy, repeatability, motion stability and low friction. In
ዧ Easy integration with order to proof precision of stage and imitate working condition,
metric/imperial opto-mechanical Standa provides measurement reports in both: disassembled and
systems assembled conditions (if required with load of customer tested as
ዧ Multy axes system with 5 arcsec a system).
orthogonality is available Linear non-contact optical encoder as a feedback system guarantees
direct control of position with sub-nanometer resolution of motion.
ዧ Can be applied to industry
Naturally aged aluminum alloy guaranties high temperature
applications like: laser cutting,
scribing, drilling, marking stability, softness of 8MTL165 instruments and excellent long
period kinematics without drift of guide system. Moving rotor
ዧ Systems is equiped with
design allows taking maximum efficiency from the ironless motor
protection from dust and spray
and generating rapid and smooth motion profiles.
ዧ All measurement reports are Translation stages of series 8MTL165 can be prepared for clean
included by default! rooms and vacuum up to 10-3 torr with small changes. For
ዧ Cables Can be customized for higher vacuum please contact Standa. Additional requirement of
different OEM electronics cleanliness could be requested separately.
Motorized translation stage can be easily connected to standard
imperial/metric optical table directly. XY scanning stages can
be directly assembled without using any connecting plates. For
extreme orthogonality please contact Standa separately.
Motion control of 8MTL165 series translation stages is available
with Standa or ACS motion Controllers & Drivers.
For light industry applications 8MTL165 stages can be supplied
mounted on standard optical table or extremely flat granite plate.
8MTL165 have passive (belt protection) protection from spray and
dusts, which allows stage to be applied in fabrication processes.
ACCESSORIES INFORMATION
Base plate for mechanical interface Not required
XY stack Directly Stackable
Z configuration Not Available
ADDITIONAL DETAILS
Dimensions of moving platform (W × L) mm 170 × 170
Stage dimensions (W × L × H) mm 453 × 220 × 70 553 × 220 × 70 653 × 220 × 70
Measurement system Metric / Imperial
Orthogonality 11) µrad/arcsec 24 /5
Protection level 13) From solid particles and spray
RoHS Compliant
Weight kg 11.5 13.5 15.5
LCMv2.
11) Stages can be assembled with required
orthogonality by request.
12) Scalar Control can be implemented with USB/
TCP-IP / RS-232 communication iterface; for
553
vector control we recommend to use EtherCAT.
13) Stage have special covers which allows to use
stage in dusty and partially wet enviroment.
8MTL1401-300
8MTL1401-300 XY
Connector
DB15(M) Connector
HDB15(M)
55
513
A 140
Ø 4H7x6 deep
M6x10 deep 125
4 holes 100 2 holes
M6x8 deep
25 holes
75
50
140
View A
300
185
125
Ø 4H7x6 deep 100 For M6 screw
2 holes 125 12 clearance holes
8MTL1401-300
View A
For M6(1/4-20) screws
8 clearance slots
Ø 4H7x6 deep
2 holes For M6 screws
4 clearance holes
127
Connector
DB15(M)
182
Connector Connector
300 (12")
100 (4")
HDB15(M) C091-31S0041002
125
503
A
140
Ø 4H7x6 deep
2 holes
M6x10 deep
125 (5") M6x8 deep 4 holes
227 25 holes
480
125
100
140
140
75
50
8MTL1401-300 XY
Y axis
cable output
8MTL1301-170
8MTL1301-170 XY
ACCESSORIES INFORMATION
Base plate for mechanical interface Not required
XY stack Directly
Z configuration Available (on request)
ADDITIONAL DETAILS
Dimensions of moving platform (W × L) 130 × 295 mm
Stage dimensions (W × L × H) 130 × 345 × 40 mm
Measurement system Metric / Imperial
Orthogonality 11) 24 µrad / 5 arcsec
Protection level 13) Basic
RoHS Compliant
Weight 4.1 kg
41
33
300
26,5
10,5
350
10
19
120
100
50
For M6 screw
8MTL1301-170 12 clearance holes
50
100
140
200
250
26,5
10,5
41
92
300
350
300
8MTL1301-170 XY 350
FEATURES
ዧ Travel range: 50 mm
ዧ Resolution: up to <0.31 nm
ዧ Precise Ball Screw Design with
preloaded low baklash screw pair
ዧ High resolution non-contact
optical linear encoder
ዧ Bidirectional repeatability (RMS):
±0.25 µm
ዧ Maximum velocity: <200 mm/s
ዧ High vertical load capacity up to:
100 kg.
Premium Vertical lift translation stage of series 8MVT390 is
ዧ High accuracy linear guide and
based on pair of stepper (optionally with rotary encoders) or 3
carriage system with recirculating
phase BLDC servo motor technology. High precision ball screw &
balls
step motor combination allow user to apply high precision, stable
ዧ Accuracy: ±1.00 µm and self-locking fine positioning system through extremely cost
ዧ Long life performance guaranteed effective way. High precision ball screw & BLDC motor combination
allow user to apply high precision in trajectory mode. “Wedge-type”
ዧ Easy integration with
design guarantees long life reliable performance of the vertical
metric/imperial opto-mechanical
systems stage.
Optionally available non-contact optical encoder as a feedback
ዧ Multy axes system with 5 arcsec
system integrated directly on the moving load, guarantees sub-
orthogonality is available
nanometer resolution of positioning with ultra-high precision and
ዧ Can be applied to industry reference mark in the center of the travel.
applications like: laser cutting,
scribing, drilling, marking
ዧ All measurement reports are
185...235
included by default!
182
60
300
Ø 10 203,2 (8") Ø7
8 clearance holes 100 4 clearance holes
304,8 (12")
300
100
150
200
260
50
50 M6x10 deep
100 81 holes
150
200
220
FEATURES
ዧ Travel range: 20 mm
ዧ Resolution: up to <0.31 nm
ዧ Precise Ball Screw Design with
preloaded low baklash screw pair
ዧ High resolution non-contact
optical linear encoder
ዧ Bidirectional repeatability (RMS):
±0.25 µm
ዧ Maximum velocity: <200 mm/s
ዧ High vertical load capacity up to: Premium Vertical lift translation stage of series 8MVT400 is
200 kg. based on pair of stepper (optionally with rotary encoders) or 3
ዧ High accuracy linear guide and phase BLDC servo motor technology. High precision ball screw &
carriage system with recirculating step motor combination allow user to apply high precision, stable
balls and self-locking fine positioning system through extremely cost
effective way. High precision ball screw & BLDC motor combination
ዧ Accuracy: ±1.00 µm
allow user to apply high precision in trajectory mode. “Wedge-type”
ዧ Long life performance guaranteed design guarantees long life reliable performance of the vertical
ዧ Easy integration with stage.
metric/imperial opto-mechanical Optionally available non-contact optical encoder as a feedback
systems system integrated directly on the moving load, guarantees sub-
ዧ Multy axes system with 5 arcsec nanometer resolution of positioning with ultra-high precision and
orthogonality is available reference mark in the center of the travel.
included by default!
For M10 screw Connector
15
M6x12 deep
29 holes
6x50=300
400
370
330
50
50
6x50=300
330
400
526
8MVT120-12 8MVT120-25
Vacuum version
110
120
7 million cycles.
Ø 37
15 110
Stepper motor
95...107,7
Hub 12,7 (1/2'')
66
35
40 140
240
25
50
75
100
120
8MVT120-12
8-0143
8MTL165-300-LEn1-001
2CPF220-165-1
360
350
8MTL220-400-LEn1-002
780 575
807
390
205
644 450
515
8MT167S-25BS1-BR-MEn4
2AB167-25-010
407,1
8MT1401Y-300
287
163
77
240 440
1B-A-75-90-015-001
8MTL1401-300
4 clearance holes
27''
750
725
500
55 848
33'' For M6 screw
875 4 clearance holes
900
8MTL401-300-8MT165-200
8MT165-200, 8MRL120,
8MTL120XY
8MTL220-600XY, 8MT165-200
8MTL120XY, 8MRL120-15
8-0143, 8MTL165-300,
8MTL220-400
8MTL120XY, 8MT200-100-B43,
8MRL120-15
YOUR CUSTOM
SOLUTION…
FEATURES
ዧ Supports up to 64 axes and thousands of I/O
ዧ Advanced Profile Generation and Servo Control
Algorithms for
ዧ Maximum Motion Performance
– ServoBoost
– LearningBoost
– MotionBoost
– Multi-axis Lookahead and Corner Rounding
– SmoothPath
– MIMO Gantry Control
– Cascaded Dual Loop Control
– Customized Algorithms (Contact ACS)
ዧ Universal Motor and Encoder Support for
Maximum Flexibility
ዧ Max Drive Current: 15/30 A Per Axis
ዧ Drive Supply Input: 85 – 265 Vac
The SPiiPlusCMxa is a member of ACS Motion Control’s
ዧ Built-In 4-Axis Pulse/Direction (PDMnt) Interface
SPiiPlus series of products and is designed to meet
ዧ Functional Safety: STO, SS1 the needs of OEMs with demanding multi-axis motion
ዧ 12 or 16 bit SinCos and Analog Input Resolution control applications. Its unique multi-processor
architecture leverages powerful profile generation
ዧ Feedback Channels: 4 (AqB, SinCos, or and servo control algorithms to maximize motion
Absolute) performance, while its universal motor and encoder
ዧ Digital I/O technology provides the system designer flexibility to
– 4 High-Speed Position Capture (MARK) Inputs control most any type of motor or stage. As an EtherCAT
master it can control ACS products within the SPiiPlus
– 8 Limit Sensor Inputs
Motion Control Platform as well as 3rd party EtherCAT
– 3 Brake Outputs products.
– 3 High-Speed Position Event Generation The SPiiPlusCMxa is highly configurable and supported
(PEG) Engines with up
by many advanced servo tuning and application
– to 10 Configurable Outputs development tools available in MMI Application Studio.
– 8 General Purpose Digital Inputs Users can control and generate motion profiles for up to
– 8 General Purpose Digital Outputs 64 axes. Configure the SPiiPlusCMxa to include 1, 2, or
ዧ Analog I/O 3 built in drives with one of three current levels: 5/10A,
10/20A, or 15/30A.
– 6 General Purpose Analog Inputs (shared with
SinCos) * The SPiiPlusCMxa is a drop-in replacement for the SPiiPlusCMba or
SPiiPlusCMhp offering improved jitter and noise performance and STO and
– 2 General Purpose Analog Outputs SS1 functional safety features.
Product
CMxayA… CMxayB… CMxayC…
(y - number of axes)
Number of built-in drives 1,2,3
Drive Supply voltage input [V] 85 - 265VAC, single or 3 phase or 120 - 375VDC
Control voltage input [Vdc] 24±10%
Phase current Cont./Peak Sine amplitude [A] 5 / 10 10/20 15/30
Phase current Cont./Peak RMS [A] 3.6 / 7.1 7/14 10.6/21.2
Peak current time [sec] 1
Max. output voltage [Vdc] (Vac in) x1.41 x 97%
Max. RMS input current
18A for 1-phase supply
1-phase supply [A] 18 24
15A for 3-phase supply
3-phase supply[A]
Min. load Inductance, at max. motor voltage
1
[mH]
Max. Heat dissipation per axis [W] 33 67 102
Weight [gram] 5750
Dimensions [mm³] 324x249x120
FEATURES
ዧ Powerful & Smart EtherCAT Drive ዧ Smart Motion related I/O
Module – Digital I/O
– Two drives per module for – Inputs: 4 encoder registration
Gantry control MARK / general purpose
– Voltage: 12 Vdc – 100 Vdc – Outputs: 2 Position Event
– Current: Up to 13.3 A / 40 A Generators, 2 motor brake /
(cont./peak) general purpose
ዧ The Ultimate Drive for Demanding ዧ Analog I/O
Positioning Applications – Inputs: 4, 12 bit resolution,
– Sub-nanometer standstill jitter ±10 V
– Nanometer tracking error and – Outputs: 4, 16 bit resolution,
optimal velocity smoothness ±10 V
ዧ A Lower Cost of Ownership
Alternative to Linear Drives
– Lower heat dissipation
– Better reliability
The NPMPM is a line of the most advanced servo drives available
– Significantly smaller
today.
– Simpler supply requirements
It is specifically designed to address the most demanding
– Digitally controlled and easy applications with regards to move and settle times, standstill
setup
jitter, and velocity smoothness, such as wafer metrology and
ዧ Uncompromised speed and inspection, FPD inspection, and ultra-precision machining for
resolution processing of optical components.
– Up to 4 Analog Sin-Cos 1Vptp It is based on the proprietary and unique technology that exceeds
encoders with frequency up to stand still jitter and tracking error performance that until now
10 MHz has been achieved only with linear drives, with reduced cost of
– Encoder multiplication of 4 to ownership.
65,536 With the optional combination of a 10MHz laser encoder interface
– Automatic encoder and the powerful algorithm, demanding sub-nanometer resolution
compensation and error positioning systems can achieve ultimate throughput and accuracy
detection
with minimal sensitivity to disturbances and stage to stage
– Dual feedback support manufacturing differences.
– Two squared Sin-Cos The NPMPM is a slave that runs under any ACS EtherCAT masters.
– Position feed forward for A comprehensive set of software support tools are provided for
active vibration isolation module configuration, setup and tuning.
systems
– Optional internal relays for
dynamic braking (shorting
motor phases)
SPECIFICATIONS
Per Axis A B C D
Continuous/Peak current Sine 3.3 / 10 A 6.63 / 20 A 103 / 30 A 13.33 / 40 A
amplitude
Continuous/Peak current 2.3 / 7 Arms 4.6 / 14.1 Arms 7 / 21.2 Arms 9.4 / 28.2 Arms
Maximum cont. Input current 2.6 Arms 5.3 Arms 8 Arms 10.6 Arms
Maximum heat dissipation, W 7 + 0.9 × (no. of drives) 7 + 2.1 × (no. of drives) 7 + 3.7 × (no. of drives) 7 + 5.6 × (no. of drives)
Maximum cont./peak output 260 / 780 W 520 / 1560 W 790 / 2340 W 1050 / 3120 W
power @ 100 Vdc
Peak current time 1 sec
Minimum load inductance 0.05 mH
@100 Vdc. Can be derated
linearily for lower voltages
PER MODULE
Control voltage input 24 ±10% Vdc
Drive voltage input range 12 – 100 Vdc (96 Vdc recommended)
Maximum output voltage (Vin motor) × 88% Vdc
Maximum cont. input current 5.2 Arms 10.6 Arms 16 Arms 21.2 Arms
FEATURES
ዧ In LUMS trajectories can be
generated by importing CAD files
(DXF, DWG, STL, Gerber, NC Drill,
etc.) or by drawing them with built
in tools.
ዧ Stitching feature to split large
objects to machine with galvo
scanners
ዧ Advanced slicing and hatching
algorithms allows to slice 300 MB
file with 4 million triangles in less
than a minute
ዧ Formulas and Variables can be DOT. LINE. PLANE. SHAPE
used and interpreted in text as
LUMS software imports DXF, DWG, Gerber files to prepare for
well using {}
laser cutting, etching, ablation and other 2D, 2.5D applications. All
ዧ LUMS controls all of the hardware objects are imported as lines and arcs for efficient machining. Set
directly size and position of the object or simply drag it where it should be
ዧ LUMS laser machining software machined.
controls positioning stages Use Hatching to fill the volume of the object. Use Stitching feature
directly using manufacturer’s .dll to split large objects to machine with galvo scanners.
files
Using 64-bit architecture, LUMS not only supports large and
ዧ LUMS laser machining complex STL files, but handles them really fast. Our advanced
software controls many hardware slicing and hatching algorithms allows to slice 300 MB file with 4
of the machine directly: stages, million triangles in less than a minute. Faulty STL models can be
galvo, lasers, sensors, I/O fixed using LUMS Slice Repair tool.
interfaces
LUMS allows NC Drill file import for laser drilling processes. Adjust
ዧ LUMS supports several cameras: via hole size by offsets to compensate beam spot diameter. Use
one camera for general view and either helical or layer by layer drilling. In Helical drilling mode, Z axis
one camera for high resolution moves constantly, while XY axes draws circles. In Layer mode a set
view number of repeats are done before moving Z axis by a specified
ዧ Fully compatible with ACS step size to increase drilling depth. Use Stitching tool to center
products each hole at the center of galvo scanners. Combine NC Drill file
ዧ Key Applications with Gerber files to do both PCB etching and drilling.
Simple shapes like lines, circles, arcs and rectangles are easy to
– Laser Additive Manufacturing
draw in LUMS software. You can draw them by hand and/or add
– PCB Laser Processing and precise parameters for size and position. You can even draw poly-
fabrication
lines and polygon shapes with a special easy to use tool. All closed
– Laser Engraving shapes can be hatched with one of the hatching types (lines,
– Laser Drilling cross-hatching, dots, contours). Select motion speed and laser
– 3D printing parameters either for each shape, groups of shapes or the whole
MOTION CONTROL
Galvanometric scanner control + + +
Positioning stages control + + +
Up to 3 axes control + + +
Unlimited number of axes - + +
Galvo+Stages Stitching - + +
Virtual Joystick + + +
FILE IMPORT
DXF, DWG + + +
STL Up on request + +
STP, IGES - + +
Gerber, NC Drill/Excellon Up on request + +
TXT, CSV + + +
TOOLS / COMMANDS
Drawing tools + + +
Hatching (lines, cross-hatching) + + +
Advanced hatching (stripes, chess pattern) - + +
Measuring - + +
Logical Commands (Loop, If) + + +
Variables - + +
Math functions + + +
Loging, Data Export - + +
Sample surface height mapping - + +
3D Printing tool Up on request + +
Support generation for 3D models - + +
3D model fixing Up on request + +
DEVICE CONTROL
IO + + +
Serial Port control + + +
Wait For IO Trigger - + +
SECURITY FEATURES
User access levels - + +
Process Parameter locking - + +
CUSTOM FEATURES
APIs to add new hardware and features - + +
Development of custom features and hardware support (up to 16 hours) - + +
Development of custom features, hardware support and user interface - - +
SYSTEM
64 bit support + + +
Multicore processing + + +
Payment 30 days net by bank wire transfer. Money Orders, Bank and Company Checks are accepted –
in this case please add 1% to lump sum of invoice to cover cashing charges. Credit
cards – VISA, MASTERCARD are accepted.
Certificate All items shown in this catalogue are supplied with Certificate of Origin Form EUR 1. AII
of origin items are import duty free when importing to EC and EFTA countries.
Warranty All products of Standa are guarantied to be free from defects in material and workmanship
for a period of one year after delivery. Standa does not assume liability from installation,
labour or consequential damages. Visit www.standa.LT for details.
Delivery Standard products are stocked and shipped off-shelf after receipt of your order. Large
volume orders are delivered under mutually agreed terms. If not altered shipping charges
are prepaid and added as separate item in the invoice.
www.youtube.com/StandaLTD
www.facebook.com/Standa.ltd www.standa.LT
Standa Main Office:
P.O.Box 377 Standa Ltd
03012 Vilnius, Lithuania Svitrigailos 4-39
Phone: +370-5-2651474 03222 Vilnius
Fax: +370-5-2651483 Lithuania
E-mail: sales@standa.lt
http://www.standa.lt
Manufacturer of Opto-Mechanical equipment and lasers for research, industry and education
Israel Slovakia
Ben Moshe Kvant spol. s.r.o.
64, Arlozorov St. Ramat-Gan, FMFI UK - Mlynská dolina
P.O. Box 18125, Tel-Aviv 61181, Israel 842 48 Bratislava, Slovakia
Phones: +972-3 670 00 07 Phone: +421-2-65411344
Fax: +972-3 672 73 19 Fax: +421-2-65411353
E-mail: bms@ben-moshe.net E-mail: kvant@kvant.com