Professional Documents
Culture Documents
Geotechnical Engineering Laboratory - Unit 4 - Week 2
Geotechnical Engineering Laboratory - Unit 4 - Week 2
Assessment submitted.
(https://swayam.gov.in) (https://swayam.gov.in/nc_details/NPTEL)
X
baskarsinghpsrecce@gmail.com
(course)
Click to register
for Certification
exam
Thank you for taking the Week 2:
Assignment 2.
(https://examform.nptel.ac.in/2023_10/exam_form/dashboard)
If already
registered, click
to check your
Week 2: Assignment 2
payment status Your last recorded submission was on 2023-07-29, 20:20 IST Due date: 2023-08-09, 23:59 IST.
Lecture 6: 3) Soil with liquid limit 45%, plastic limit 25% and shrinkage limit 15%, the plasticity index 1 point
Grain Size is,
Analysis
(contd..) (unit? 50%
unit=26&lesson=27)
20%
Lecture 7: 60%
Atterberg Limit
40%
https://onlinecourses.nptel.ac.in/noc23_ce72/unit?unit=26&assessment=69 1/3
7/29/23, 8:20 PM Geotechnical Engineering Laboratory - - Unit 4 - Week 2
Lecture 10:
consistency index
Compaction flow index
(contd..) (unit?
plasticity index
unit=26&lesson=31)
Lecture 11: 6) In a liquid limit test by Casagrande cup method, 15 blows were required at 60% water 1 point
Compaction content and 35 blows were required at 40% water content. Liquid limit (round off to the nearest
and integer) of the soil is
Permeability
(unit? 52%
unit=26&lesson=32)
44%
Quiz: Week 2: 48%
Assignment 2
56%
(assessment?
name=69)
7) The soil which plot above the A line in the plasticity chart are 1 point
Weekly
Feedback Clays
(unit?
silts
unit=26&lesson=35)
sands
Download organic soils
Videos ()
8) For a standard compaction test, the mass of hammer and the drop of hammer are as 1 point
follows:
9) If the moisture content of soil sample is decreased beyond shrinkage limit it’s volume 1 point
Decreases
Increases
Remain constant
None of the above
https://onlinecourses.nptel.ac.in/noc23_ce72/unit?unit=26&assessment=69 2/3
7/29/23, 8:20 PM Geotechnical Engineering Laboratory - - Unit 4 - Week 2
10) For a Modified compaction test, the mass of hammer and the drop of hammer are as 1 point
Assessment submitted. follows:
X
1.6 kg and 450 mm
2.6 kg and 310 mm
4.89 kg and 450 mm
5.89 kg and 310 mm
You may submit any number of times before the due date. The final submission will be considered
for grading.
Submit Answers
https://onlinecourses.nptel.ac.in/noc23_ce72/unit?unit=26&assessment=69 3/3