Professional Documents
Culture Documents
47-Cedge Templates
47-Cedge Templates
Navigate on your left side menu and open Configuration > Templates >
Here you can configure almost all the parameters that you find in the system part of the cEdge
router configuration. First give the Template Name and Description. For Site ID, System IP and
Hostname choose device-specific option.
I do need to add a default route. The default is global, which is fine because all my cEdge Routes
need this default route. Click on New IPv4 Route.
Choose Global value & type Prefix 0.0.0.0/0. Click on + Add Next Hop
Click one Add one more time, and the default route will show up.
Most of the configuration items are the same for all my cEdge routers. However, the IPv4
address is device-specific and Static.
Under the Tunnel choose Global setting, Tunnel Interface On and Color biz-internet.
Under Advertise OMP Connected (IPv4) choose global and make it On. Finally click Save.
Provide Template Name and Description, Under the basic configuration Shutdown setting
global and choose No and Interface Name set GigabitEthernet2
Finally, all our Features templates are ready next is to create Device Template.