This document lists tools recommended for a general aviation mechanic. It includes various wrenches, screwdrivers, hammers, pliers, sockets and other hand tools needed for tasks like maintenance, repair and inspection of aircraft systems and components. A lockable toolbox is also recommended to store and transport these essential mechanic tools.
This document lists tools recommended for a general aviation mechanic. It includes various wrenches, screwdrivers, hammers, pliers, sockets and other hand tools needed for tasks like maintenance, repair and inspection of aircraft systems and components. A lockable toolbox is also recommended to store and transport these essential mechanic tools.
This document lists tools recommended for a general aviation mechanic. It includes various wrenches, screwdrivers, hammers, pliers, sockets and other hand tools needed for tasks like maintenance, repair and inspection of aircraft systems and components. A lockable toolbox is also recommended to store and transport these essential mechanic tools.
x Standard Combination Wrench x ¼” and 3/8” Socket Extensions
Set (1/4” included) x Universal Adapter (recommend ratcheting x Adapters ¼” to 3/8” and 3/8” to wrenches) ¼” x Speed Handle, recommend x Angle Wrenches (up to 1”) screw gun x Centering Punch x Phillips and Standard x Mechanical/ Magnetic Fingers Screwdriver Set x Brass Punch (Small, Medium, x Ball Peen Hammer Large) (recommended) 16 or 24oz x Crows Feet (3/8” to 1”) x Roll Pin Punch and Chisel Set x Awl/Scribe x ½” 12 Point Socket Set (up to x Hacksaw 7/8”) Deep and Shallow Set x Lockable Tool Box x 3/8” 12 Point Socket Set (up to x Schrader Valve Tool 7/8”) x Knee Pads x Aircraft Safety Wire Pliers x 6” Machinist Rule x Duck Bill Pliers x Tape Measurer x Needle Nose Pliers x Rubber Mallet x Wire Cutters/ Diagonal Cutting x Breaker Bar (3/8” and ½”) Pliers x Bit Holder x Slip Joint Pliers x Swivel Socket Set x Adjustable Wrench (need 2) x Hand File and Handle x Vice Grips (Large and Small) x Hand Squeeze Pop Rivet Gun x Internal and External Snap Ring x Air Blow Gun (< 20 psi) Pliers x ¼” Drive Spline Sockets (1/4” to x Cotter Pin Removal Tool 9/16”) x Pick Set x Over-sized Sockets (1”, 1 1/8”, 1 x Allen Wrench Set ¼”, 1 1/16”) x Flash Light x Smooth Jaw Pliers x Feeler Gauges x 12V Drill x Mirror