20-0160 Cleaning cooling and heating system
Procoding work
Coolant drained (20-0100)
‘Operation no. of opevalon loxls and work uns o Standard Wxts|
‘and ta rates
Cause of ol teak cts
Heater or AC controls
Cooling system
Engine
Engine
Flushing solution
Heating system heat exchanger
Cooling and heating system
Overflow tank .
Expansion tank
Coolant and heating hoses
Fresh coolant
ate RA 201139-0160"1
set to “warm”
{il with a solution from a container (0.5 kg) of
alkaline cleaner part no. 001 986 2171 and
clear water
‘warm up to operating temperature with flushing
solution
run for about 5 minutes with flushing solution
drain from crankcase and radiator (20-0100)
thoroughly flush out through the feed pipe with
reduced water pressure
thoroughly flush out with clear water with
‘engine running.
A
Clear flushing is successful if no solvent
residues are present in the cooling and heating
system, ie. the flushing water which flows out
must no longer foam.
replace (20-4540)
replace (20-4500) i! discolored by oil on inside
inspect for effects of oil; replace if necessary
pour in (20-0100)