Professional Documents
Culture Documents
UN1362
UN1362
C O M PA N Y C O M PA N Y
2. Hazards identification
The nature and levels of chemical additives used in the manufacture of this material has been deemed to pose the
following classification:
Mention of hazards: Xn
R-Phrases: R32
S-Phrases: S22-36/S38
Hazardous reactions: May give CO and CO2 emanations in the event of a fire.
Information pertaining to Combustible product
particular dangers for humans Pollution due to the dispersion of spattered carbon
and the environment: To take medicine can be alleviated by the adsorbent capacity of activated carbon
Material Safety Datasheet: AddSorb® VA12
3. Composition/information on ingredients
Substance/preparation: Substance
Chemical characterization: Activated carbon
Chemical formulae: C
CAS number: 7440-44-0
E.I.N.E.C.S. number: 931-328-0
Classification in accordance with Directive 67/548/CEE: Not classified
Classification in accordance with Regulation EC/1272/2008: Not classified
5. Fire-fighting measures
Personal precautions Work with safety glasses and a suitable dust mask
to avoid inhalation inhalation of dust. Wear plastic
or rubber gloves if the carbon is spilled.
Protective measures for environment Avoid contact between spilled carbon and
water. Do not throw into sewerage system, pipes,
water streams or ground water.
Material Safety Datasheet: AddSorb® VA12
Methods for cleaning spillage Draw up or scoop up for recovery and destruction
of spilled carbon. Draw up or scoop up for
recovery and packaging of clean carbon.
Appearance Granules
Odour None
Colour Black
Density 200 to 700 kg/m3
pH 7 to 11
Stability Stable.
Conditions to avoid High temperature.
Materials to avoid Solvents and strong oxidising agents.
Hazardous decomposition products CO and CO2 emanations.
UN Number: 1362
ADR, RID: not dangerous (special disposure 646: steam activated carbon)
IMDG Code: not dangerous (special disposure 925: steam activated carbon)
IATA: not dangerous (special disposure A3, when tested, does not meet the defined
criteria)
The data contained in this Safety Data Sheet has been supplied for the purpose of protecting the health and safety of
industrial and commercial users who are deemed capable of understanding and acting on the information provided.
In addition, users must pay attention to the possible hazards incurred by the product for other applications
than the ones prescribed.
Material Safety Datasheet: AddSorb® VA12
NOTICE Due to the progressive nature of the Jacobi Carbons Group and the continually improving design and performance of our products,
we reserve the right to change product specifications without prior notification. The information contained in this datasheet is intended to
assist a customer in the evaluation and selection of products supplied by Jacobi Carbons. The customer is responsible for determining whether Jacobi Corporate Headquarters
products and the information contained in this document are appropriate for customer’s use. Jacobi Carbons assumes no obligation or liability
for the usage of the information in this datasheet, no guarantees or warranties, expressed or implied, are provided. Jacobi Carbons disclaims Slöjdaregatan 1
responsibility and the user must accept full responsibility for performance of systems based on this data. SE-39353 Kalmar | Sweden
Tel: +46 480 417550 | Fax: +46 480 417559
© Copyright 2012. Jacobi, Jacobi Carbons, PICA and the Jacobi and PICA logos are registered trademarks and AquaSorb, EcoSorb, info@jacobi.net | www.jacobi.net
ColorSorb, DioxSorb, AddSorb, ReSorb, PICACTIF, PICAPURE, PICATOX, PICACARB, PICAGOLD, PICARESP, PICAHYDRO and PICACLEAN
are trademarks of Jacobi Carbons, all of which may or may not be used in certain jurisdictions.
JACOBI-MSDS-ADDSORB-VA12-A4-ENG-A0813