Professional Documents
Culture Documents
docx
Rev. 06 Data:
18/06/20132/09/2018
ID Documento: EAAM0184
Prodotto: Single Phase Automatic
Fuel Pump Control
1. Working modes ........................................................................................................ 3
2. Technical specifications ......................................................................................... 4
3. Dimensions .............................................................................................................. 5
4. Connections ............................................................................................................. 6
ii USER MANUAL
OFF: all off (used with external remote switch)
Activation: pump command is activated with 2 seconds delay (t1) from fuel
solenoid activation.
AUTO: the fuel level is maintained between MIN START and MAX STOP (the pump
starts when the level is lower than MIN. START and stops at MAX STOP level)
Activation: pump command is activated with 2 seconds delay (t1) from fuel
solenoid activation.
USER MANUAL 3
BLOCKS: MAX ALARM: stops the pump both in manual and automatic modes
NOTES: In order to use a remote switch, the internal switch must left in OFF position.
The supply inputs for the security solenoid command are pin X (positive 12-24V) and
20 (ground 0V) of the connector J1: connect the X pin to a positive which is present
only when the engine is running and with a proper current rate.
4 USER MANUAL
USER MANUAL 5
6 USER MANUAL
This document is owned by SICES s.r.l.. All rights reserved. SICES s.r.l. reserves the right to modify
this document without prior notice.
SICES has made any effort to ensure that the information herein provide are correct; in any case
SICES does not assume any liability for the use these information.
The disclosure by any means of this document to third parties is not allowed.
SSSTTTTTGHTY
1