Professional Documents
Culture Documents
CBI2801224A
CBI2801224A
Output Current In
Output Voltage (Vn) / Nominal Power (W) 12 / 24 VDC / 270W (jumper selection)
15 A @ 12VDC / 10A @ 24VDC
Efficiency (at 50% of rated current) ≥ 91 %
Turn-On delay after applying input voltage 1 sec. (max)
Start up with Strong Load (capacitive load) Yes, Unlimited
Dissipation power load max 28 W
PROTECTION
Short-circuit protection Yes
Over Load protection Yes
Over Voltage Output protection Yes (typ. 35 VDC)
LOAD Over Temperature protection Yes
For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power.
164
CBI2801224A
DC UPS Jumper for Battery Type Selection
The Altech DC-UPS system is built to optimize power
management. The available power is automatically allocated Open
between load and battery, supplying power to the load is the first Lead
1 2 3 4 6 7
priority. For high inrush applications the charging power will Sealed
reroute automatically to the load. In this case the maximum Lead Low
available current on the load output is two times the value of the 1 2 3 4 6 7 1 2 3 4 5 6 7 8 9 10
Sealed – + – +
device rated current.
Lead High
1 2 3 4 6 7 ADJ. MAINS LOW BATTERY
OR OR BATTERY
The Battery Care concept based on algorithms that achieve rapid Gel BACKUP REPLACEMENT
Time Auto-diagnostic system, monitors battery faults, sulfated Gel LOW BATTERY
OR BATTERY
Battery (1) REPLACEMENT
battery, short circuit battery elements, reverse polarity connection, 1 2 3 4 6 7 DIAGNOSIS
battery disconnect. This conditions are detected and identified by NiCd - BATTERY
the number of blinks of the diagnosis Led. NiMh (1) START
1 2 3 4 6 7
L N
Signal Output Contacts Jumper for Functional Setting
Main or Backup Power Yes
Battery Life
Battery Power Low Yes
Test On1
Battery Fault Yes 1 2 3 4 6 7 1
Jumper present: life test enabled.
Max. Current Rating (Resistive Load) 1A 30 VDC/60 VAC Fast Charge 2
Jumper present: fast test enabled.
3
Minimum Permissible Current Rating 1mA @ 5 VDC Enable2 Jumper present: fast recovery charge
1 2 3 4 6 7 enabled only for size 3. Possibility to
RJ45 Connection Input/Output Fast Recovery
recharge the battery also when the
voltage is close to zero with the
Temp. Comp. Battery (with ext. probe) Yes – (Aux 1) Charge (2)3 maximum power of the device.
ModBus / Can Bus Yes – (Aux 2) 1 2 3 4 6 7
ModBus / Can Bus Yes – (Aux 3)
Environment
Insulation voltage (IN/OUT) 3000 VAC
Insulation voltage (input / ground) 1605 VAC
Insulation voltage (Output / ground) 500 VAC
Protection Class (EN/IEC 60529) IP20
Pollution Degree Environment 2
Connection TB, Screw Terminal 2.5 mm² (24-14 AWG)
Protection class (Ground Connected) Class I
Dimensions (WxHxD) 115x115x135 mm
2.95x4.53x5.32 in
Weight (approx.) 0.85 kg (1.9 Lbs)
A compact and rugged metal case with DIN rail mounting bracket Recovery Charge Fast / Boost Charge Tickle / Float Charge
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
165