Professional Documents
Culture Documents
Coax Catalogue
Coax Catalogue
Increased lifespan
Dependable Transmissions
This catalogue has been designed to help you find the correct
connector and cable for your application. Should you need a bespoke
solution our technical sales team will be pleased to advise you on
suitability, production times and costs.
If you can’t find what you are looking for, simply contact the Sales
Department with your enquiry and they will be happy to assist.
For reliable high quality connectors from an ISO 9001:2008 approved company
where performance counts Coax Connectors Ltd provides the answer. We
manufacture and supply connectors and produce complete cable assembly
solutions for a wide range of applications across all industry sectors including:
• Automotive • Medical
• Broadcast • Scientific
• Defence • Security
• Energy • Telecommunications
• Exploration • Transportation
Not all connectors are designed & manufactured
to the same standard
The cost of compromise:
Reduced lifespan
Unreliable Transmissions
Is it worth compromising?
3 simple steps
to achieving performance, You or your customers often specify the most
quality and endurance advanced and sophisticated equipment available
but when it comes to connecting them it is often
the case that the cheapest product is acquired to
Increased lifespan
save a negligible amount on installation cost.
Coax range of quality connectors Coax only supplies cable that No matter what you spend on
offer consistent and dependable we believe offer you the best in materials correct termination with
transmission together with the best performance at cost efficient prices. the right tools and training is
possible signal purity. essential to complete a successful
installation.
Introducing...
New products for 2012
Miniature 75ohm Surface Mount PCB and Cable Connector Series
The male pcb connector is surface mounted and soldered directly to the
pcb. The connector is 4mm Dia. and occupies a footprint on the pcb of
12.6mm2. The vertical height is 3.0mm. The connector can be supplied
loose or in tape and reels for pick and placement. An orientation flat has
been included to ensure correct orientation in the packaging and correct
6
pcb placement.
7
size, positive easy locking connection and closed entry contact configuration are key features
in the design. Although the current range has been designed to match 75ohm Broadcast
cables, we can design versions to suit other cables on request.
• Our smallest True 75ohm High Definition (3G) BNCs • Coupling nut extended backwards to aid mating and
• Surpassing SMPTE 292M & 424M/ HD-SDI specifications unmating and to improve resistance to side load
• Performs at frequencies of 0-6GHz • Closed entry contact to prevent missmating
• Pitch spacing of as little as 8mm enables very high • Utilises standard stripping dimensions and tooling
density installations
ABOVE: Comparison between the three BNCs - from left to right BNC, Mini BNC and Micro BNC.
The plugs are so small and can be used in such high densities that
an innovative design feature is the extended coupling nut to assist in
mating and unmating where it is difficult for fingers to reach. Where it is
impossible for fingers to reach there is a purpose designed Insert/Extract
tool (see Page 45). Bayonet locking offers speed and security of mating.
BNC Connectors
BNC connectors are best known for their rugged bayonet coupling for
easy and quick mating/unmating. Available in both 50ohm and 75ohm
impedances and up to 6GHz frequency. See our range of True 75ohm
connectors for Broadcast and HDcctv applications.
10-005-A3-AH BNC Crimp/Crimp Plug 50ohm RG58, RG141, LMR195, URM43, 1 336A A1
URM76, WBC195, PSF1/6, KX15, KX23
10-005-A3-DE BNC Solder/Crimp Plug 50ohm LMR400, RG8, Belden9913, TZC50032 1 336K A1
10-005-B3-AH BNC Crimp/Crimp Plug 50ohm RG58, RG141, LMR195, URM43, 1 336A A1
URM76, WBC195, PSF1/6, KX15, KX23
9
applications. Annealed for easy crimping.
10-006-A3-AD BNC Crimp/Crimp Plug (4 Part) RG174, RG188, RG316, LMR100, 1 336A A1
WBC100, URM95, KX22, KX3
10-006-A3-AE BNC Crimp/Crimp Plug (4 Part) RD316, RD188 1 336A A1
This BNC is mounted from behind the bulkhead. 50ohm impedance commonly used
in antenna, military and analog CCTV applications. Annealed for easy crimping.
10-254-A3-AH BNC Bulkhead Rear Mount RG58, RG141, LMR195, URM43, 1 336A A1
Crimp/Crimp Jack URM76, WBC195, PSF1/6, KX15,
KX23
10-254-A3-AK BNC Bulkhead Rear Mount RG223 1 336A A1
Crimp/Crimp Jack
CONTINUED >
10-256-A0-AD BNC Bulkhead Rear Mount RG174, RG188, RG316, LMR100, 1 336A A1
Crimp / Crimp Jack WBC100, URM95, KX22, KX3
10-260-A3-AD BNC Bulkhead Rear Mount RG174, RG188, RG316, LMR100, 1 336A A1
Crimp / Crimp Insulated Jack WBC100, URM95, KX22, KX3
10-264-B3-AA BNC Bulkhead Rear Mount RG178, RG196 1 336J A1
Crimp / Crimp Jack
Right Angle 50ohm impedance commonly used in antenna, military and analog
CCTV applications. Unique solderless design and annealed for easy crimping.
10-104-A3-AH BNC Right Angle Crimp/ RG58, RG141, LMR195, URM43, 1 336A A1
Crimp Plug URM76, WBC195, PSF1/6, KX15, KX23
10-278-B3-AD BNC Bulkhead Front Mount RG174, RG188, RG316, LMR100, 1 336A A1
Crimp/Crimp Jack WBC100, URM95, KX22, KX3
10-278-B3-AK BNC Bulkhead Front Mount RG223 1 336A A1
Crimp/Crimp Jack
10-380-B3-AD BNC Bulkhead Front Mount RG174, RG188, RG316, LMR100, 1 336A A1
Crimp/Crimp Jack WBC100, URM95, KX22, KX3
10-004-A0-AI BNC twist-on Plug RG59, RG62, URM70, URM104, KX6, 7 N/A A5
KX52, KX30
10-004-A0-AJ BNC twist-on Plug RG59 DB 7 N/A A5
10-004-A0-CB BNC twist-on Plug CT100RBS 7 N/A A5
10-004-A0-CD BNC twist-on Plug CT125RBS 7 N/A A5
11
Our range of BNCs for a wide range of 75ohm cables. Commonly used in
Telecoms and Video applications. Annealed for easy crimping.
Our range of BNCs for a wide range of 75ohm cables. Commonly used in
Telecoms and Video applications. Annealed for easy crimping.
10-104-A0-AI BNC Right Angle Crimp/Crimp RG59, RG62, URM70, URM104, 1 336A A1
Plug 75ohm KX6, KX52, KX30
10-104-A0-EE BNC Right Angle Crimp/Crimp RG59U 1 See Data A1
Plug 75ohm Sheet
10-254-A0-AI BNC Bulkhead Rear Mount RG59, RG62, URM70, URM104, KX6, 1 336A A1
BNC Right Angle Crimp/Crimp
Crimp/Crimp 75ohm Jack Plug KX52, KX30
10-254-A0-BD BNC Bulkhead Rear Mount BT3002,TZC75024, TZC75025 1 VC A1
Crimp/Crimp 75ohm Jack
10-254-A0-FA BNC Bulkhead Rear Mount Belden 1855ENH, Draka0.6/2.8AF, 1 HTS-75 A1
Crimp/Crimp 75ohm Jack BDSD01, Image360
10-254-A0-GB BNC Bulkhead Rear Mount BT2003, PSF 1/3 1 VR A1
Crimp/Crimp 75ohm Jack
13
10-256-A0-AB BNC Bulkhead Rear Mount RG179, RG187, Belden 179DT 1 336A A1
Crimp/Crimp 75ohm Jack
(4 Part)
10-258-A3-AI BNC Bulkhead Rear Mount RG59, RG62, URM70, URM104, KX6, 1 336A A1
Crimp/Crimp 75ohm KX52, KX30
Insulated Jack
These True 75ohm High Definition (3G) BNCs have been developed to meet
the ever increasing frequencies and data rates used in Broadcast (surpassing
SMPTE 292M & 424M/HD-SDI specifications), Telecoms and HDcctv. Annealed
for easy crimping.
10-005-B36-AB BNC High Definition Crimp/ RG179, RG187, Belden 179DT 1 336J A1
Crimp Plug, True 75ohm (3G)
10-005-B36-AI BNC High Definition Crimp/ RG59, RG62, URM70, URM104, KX6, 1 336A A1
Crimp Plug, True 75ohm (3G) KX52, KX30
10-005-B36-BC BNC High Definition Crimp/ BT2003, PSF 1/3 1 VR A1
Crimp Plug, True 75ohm (3G)
10-005-B36-EG BNC High Definition Crimp/ Belden 1505F, 59U Quad Shield, 1 336C A1
Crimp Plug, True 75ohm (3G)
10-005-B36-FA BNC High Definition Crimp/ Belden 1855ENH, Draka 0.6/2.8AF, 1 HTS-75 A1
Crimp Plug, True 75ohm (3G) BDSD01, Image360
10-005-B36-FB BNC High Definition Crimp/ Belden 1505A, Draka 0.8/3.7, 1 336A A1
Crimp Plug, True 75ohm (3G) Image 720
10-005-B36-FC BNC High Definition Crimp/ Belden1694A, Belden 1694F, Draka 1 HTS-75 A1
Crimp Plug, True 75ohm (3G) 1.0/4.8AF, BD SD11, Image1000
10-005-B36-FD BNC High Definition Crimp/ Belden 7731A, Draka 1.6/7.3AF, 1 336K A1
Crimp Plug, True 75ohm (3G) Image 2000,
Colour Key
Cable Types (see page 48) Crimp Tool (see page 46)
Termination Method (see page 50) Stripping Dimensions (see page 47)
BNC High Definition Crimp/Crimp Jacks, True 75ohm (3G)
These True 75ohm High Definition (3G) BNCs have been developed to meet
the ever increasing frequencies and data rates used in Broadcast (surpassing
SMPTE 292M & 424M/HD-SDI specifications), Telecoms and HDcctv. Annealed
for easy crimping.
10-054-B36-AB BNC High Definition Crimp/Crimp Jack, RG179, RG187, Belden 179DT 1 336A A1
True 75ohm (3G)
10-054-B36-AI BNC High Definition Crimp/Crimp Jack, RG59, RG62, URM70, URM104, 1 336A A1
True 75ohm (3G) KX6, KX52, KX30
10-054-B36-BC BNC High Definition Crimp/Crimp Jack, BT2003, PSF 1/3 1 VR A1
True 75ohm (3G)
10-054-B36-BD BNC High Definition Crimp/Crimp Jack, BT3002,TZC75024, TZC75025, 1 VC A1
True 75ohm (3G)
10-054-B36-FA BNC High Definition Crimp/Crimp Jack, Belden 1855ENH, Draka 1 HTS-75 A1
True 75ohm (3G) 0.6/2.8AF, BDSD01, Image360
10-055-B36-BF BNC High Definition Crimp/Crimp Jack, BT7000, RA7000 1 VQ A1
True 75ohm (3G)
10-056-B36-AB BNC High Definition Crimp/Crimp Jack, RG179, RG187, Belden 179DT 1 336A A1
True 75ohm (3G)
10-056-B36-BG BNC High Definition Crimp/Crimp Jack, RA8000 1 336J A1
True 75ohm (3G)
This True 75ohm High Definition (3G) BNCs is mounted from behind the
bulkhead. They have been developed to meet the ever increasing frequencies
and data rates used in Broadcast (surpassing SMPTE 292M & 424M/HD-SDI
specifications), Telecoms and HDcctv. Annealed for easy crimping.
10-256-B36-FA BNC Bulkhead Rear Mount Crimp/ Belden 1855ENH, Draka 1 HTS-75 A1
Crimp True 75ohm Jack (3G) 0.6/2.8AF, BDSD01, Image360
10-282-B36-BG BNC Bulkhead Rear Mount Crimp/ RA8000 1 336J A1
Crimp True 75ohm Jack (3G)
Currently our highest performing True 75ohm BNC connector, stable up to 6GHz.
Annealed for easy crimping.
10-005-D66-EA BNC Crimp/Crimp Plug True 75ohm (6GHz) Belden 1505A, Draka 0.8/3.7, Image 720 1 336A A1
10-005-D66-FA BNC Crimp/Crimp Plug True 75ohm (6GHz) Belden 1855ENH, Draka 0.6/2.8AF, 1 HTS-75 A1
BDSD01, Image360
10-005-D66-FB BNC Crimp/Crimp Plug True 75ohm (6GHz) Belden 1505A, Draka 0.8/3.7, Image 720 1 336A A1
10-005-D66-FC BNC Crimp/Crimp Plug True 75ohm (6GHz) Belden 1694A, Belden 1694F, Draka 1 HTS-75 A1
1.0/4.8AF, BD SD11, Image1000
15
BNC Black Crimp/Crimp Plugs True 75ohm (6GHz)
Currently our highest performing True 75ohm BNC connector, stable up to 6GHz.
Annealed for easy crimping.
10-005-W66-FA BNC Black Crimp/Crimp Plug Belden 1855ENH, Draka 0.6/2.8AF, 1 HTS-75 A1
True 75ohm (6GHz) BDSD01, Image360
10-005-W66-FB BNC Black Crimp/Crimp Plug Belden 1505A, Draka 0.8/3.7, 1 336A A1
True 75ohm (6GHz) Image 720
10-005-W66-FC BNC Black Crimp/Crimp Plug Belden 1694A, Belden 1694F, Draka 1 HTS-75 A1
True 75ohm (6GHz) 1.0/4.8AF, BD SD11, Image1000
BNC Adaptors
BNC Adaptors - including 50ohm, 75ohm, 1GHz to 6GHz. If you cannot find
what you require telephone our sales team on 020 8538 9090 or email
info@coax-connectors.com
BNC PCB Connectors. If you cannot find what you require telephone
our sales team on 020 8538 9090 or email info@coax-connectors.com
Colour Key
Cable Types (see page 48) Crimp Tool (see page 46)
Termination Method (see page 50) Stripping Dimensions (see page 47)
Mini BNC Connectors
This is a new high density BNC connector (10.5mm Pitch) slightly larger than the MICRO BNC but 40%
smaller than the standard BNC range. This connector is 75ohm designed for Telecom, Security and
Broadcast applications.The connector has been designed for 0–3GHz performance with plug and cable
17
jack variants. The cable termination method is crimp/crimp utilising standard stripping dimensions and
industry available crimp tooling. The bayonet locking facility provides an advantage over a threaded or
push fit alternative connector and could be a drop in replacement for SMB, SMZ or 1.6/5.6 connectors.
These True 75ohm Mini BNC connectors are mounted from behind the
bulkhead. They are 40% smaller than standard BNCs allowing for significant
space saving where space is at a premium. Same crimp tools can be used as
with our standard BNCs. Annealed for easy crimping.
63-254-B6-AB Mini BNC Bulkhead Crimp/ RG179, RG187, Belden 179DT 1 336J A1
Crimp Jack
63-254-B6-BD Mini BNC Bulkhead Crimp/ BT3002,TZC75024, TZC75025, 1 VC A1
Crimp Jack
63-254-B6-BF Mini BNC Bulkhead Crimp/ BT7000, RA7000 1 VQ A1
Crimp Jack
63-254-B6-BG Mini BNC Bulkhead Crimp/ RA8000 1 336J A1
Crimp Jack
63-254-B6-FA Mini BNC Bulkhead Crimp/ Belden 1855ENH, Draka 0.6/2.8AF, 1 HTS-75 A1
Crimp Jack BDSD01, Image360
Micro BNC Connectors
This is a new lightweight, True 75ohm, High Definition (3G), high density, BNC connector.
It is 50% smaller than standard BNCs and has been developed to meet the ever increasing
frequencies and data rates used in Broadcast (surpassing SMPTE 292M & 424M/HD-SDI
specifications), Telecoms, HDcctv, Instrumentation, Military and Medical markets. The small
size, positive easy locking connection and closed entry contact configuration are key features
in the design. Although the current range has been designed to match 75ohm Broadcast
cables, we can design versions to suit other cables on request.
ABOVE: Comparison between the three BNCs - from left to right BNC, Mini BNC and Micro BNC.
The plugs are so small and can be used in such high densities that an innovative
design feature is the extended coupling nut to assist in mating and unmating
where it is difficult for fingers to reach. Where it is impossible for fingers to reach
there is a purpose designed Insert/Extract tool (see Page 45). Bayonet locking
offers speed and security of mating.
18
67-005-B66 FA Micro BNC Straight Crimp/ Belden 1855ENH, Draka 0.6/2.8AF, 1 HTS-75 A1
Crimp Plug 75ohm (6Ghz) BDSD01, Image360
67-005-B6-AB Micro BNC Straight Crimp/ RG179, RG187, Belden 179DT 1 HTS-75 A1
Crimp Plug 75ohm (6Ghz)
A range of board mounting jacks which offers a choice of vertical, right angle
and end launch orientations and mounting leg patterns. Closed entry contact
to prevent missmating.
19
TNC Straight Solder/Top Hat Clamp Plugs
50ohm impedance with a solder pin and braid clamp termination style.
Commonly used in military, antenna and avionics applications.
13-001-A3-AH TNC Straight Solder/Top Hat RG58, RG141, LMR195, URM43, 3 N/A See
Clamp Plug URM76, WBC195, PSF1/6, KX15, KX23 Data
Sheet
13-001-A3-AI TNC Straight Solder/Top Hat RG59, RG62, URM70, URM104, KX6, 3 N/A See
Clamp Plug KX52, KX30 Data
Sheet
13-001-A3-DE TNC Straight Solder/Top Hat LMR400, RG8, Belden 9913, 3 N/A See
Clamp Plug TZC50032, Data
Sheet
13-005-A0-AB TNC Crimp/Crimp Plug 75ohm RG179, RG187, Belden 179DT 1 336A A1
13-005-A0-AI TNC Crimp/Crimp Plug 75ohm RG59, RG62, URM70, URM104, KX6, 1 336A A1
KX52, KX30
13-005-A0-AM TNC Crimp/Crimp Plug 75ohm RG11, KX8 1 336K6 A1
13-005-A3-AH TNC Crimp/Crimp Plug 50ohm RG58, RG141, LMR195, URM43, 1 336A A1
URM76, WBC195, PSF1/6, KX15,
KX23
13-005-A3-AN TNC Crimp/Crimp Plug 50ohm RG213, URM67, KX4 1 336K A1
13-005-A3-AO TNC Crimp/Crimp Plug 50ohm RG214 1 336K A1
13-005-A3-AU TNC Crimp/Crimp Plug 50ohm RG400, RG142 1 336A A1
13-005-B3-AH TNC Crimp/Crimp Plug 50ohm RG58, RG141, LMR195, URM43, 1 336A A1
URM76, WBC195, PSF1/6, KX15,
KX23
13-005-B3-AK TNC Crimp/Crimp Plug 50ohm RG223 1 336A A1
13-005-B3-DB TNC Crimp/Crimp Plug 50ohm LMR240 1 336A A1
13-005-B3-DC TNC Crimp/Crimp Plug 50ohm LMR300 1 336A A1
TNC Crimp/Crimp Plug (4 Part)
This 4 part connector uses a Delrin pusher sleeve to support smaller diameter
cables. 50ohm impedance commonly used in military, antenna and avionics
applications. Annealed for easy crimping.
13-006-A3-AD TNC Crimp/Crimp Plug (4 Part) RG174, RG188, RG316, LMR100, 1 336A A1
WBC100, URM95, KX22, KX3
This 4 part connector uses a Delrin pusher sleeve to support smaller diameter
cables. 50ohm impedance commonly used in military, antenna and avionics
applications. Annealed for easy crimping.
13-055-A3-AD TNC Crimp/Crimp Jack (4 Part) RG174, RG188, RG316, LMR100, 1 336A A1
WBC100, URM95, KX22, KX3
13-104-A3-AH TNC Right Angle Crimp/Crimp Plug RG58, RG141, LMR195, URM43, 1 336A A1
URM76, WBC195, PSF1/6, KX15, KX23
13-104-A3-AK TNC Right Angle Solder/Crimp Plug RG223 2 336A A2
13-105-B3-AN TNC Right Angle Solder/Crimp RG213, URM67, KX4 2 336K A2
Plug (Hex)
13-106-A0-AD TNC Right Angle Crimp/Crimp RG174, RG188, RG316, LMR100, 1 336A A1
Plug (4 Part) WBC100, URM95, KX22, KX3,
13-109-B3-DC TNC Right Angle Solder/Crimp Plug LMR300 2 336A A2
21
TNC Bulkhead Rear Mount Crimp/Crimp Jacks
This TNC is mounted from behind the bulkhead. 50ohm impedance commonly
used in military, antenna and avionics applications. Annealed for easy crimping.
13-254-A3-AH TNC Bulkhead Rear Mount RG58, RG141, LMR195, URM43, 1 336A A1
Crimp/Crimp Jack URM76, WBC195, PSF1/6, KX15, KX23
13-254-A3-AK TNC Bulkhead Rear Mount RG223 1 336A A1
Crimp/Crimp Jack
13-256-A0-AA TNC Bulkhead Rear Mount RG178, RG196 1 336J A1
Crimp/Crimp Jack (4 Part)
13-256-A0-AD TNC Bulkhead Rear Mount RG174, RG188, RG316, LMR100, 1 336A A1
Crimp/Crimp Jack (4 Part) WBC100, URM95, KX22, KX3
13-264-A0-AD TNC Bulkhead Rear Mount RG174, RG188, RG316, LMR100, 1 336J A1
Crimp/Crimp Jack (Bullet) WBC100, URM95, KX22, KX3
13-264-B3-AA TNC Bulkhead Rear Mount RG178, RG196 1 336J A1
Crimp/Crimp Jack (4 Part)
This TNC is insulated and mounted from behind the bulkhead. 50ohm impedance commonly used
in military, antenna and avionics applications.
13-258-A3-AH TNC Bulkhead Rear Mount RG58, RG141, LMR195, URM43, 1 336A A1
Crimp/Crimp Jack Insulated URM76, WBC195, PSF1/6, KX15, KX23
CONTINUED >
14-005-B3-DE TNC RP Crimp/Crimp Plug LMR400, RG8, Belden 9913, 1 336K A1
TZC50032,
14-006-A3-AD TNC RP Crimp/Crimp Plug RG174, RG188, RG316, LMR100, 1 336A A1
(4 Part) WBC100, URM95, KX22, KX3,
TNC Adaptors
22
TNC Adaptors. If you cannot find what you require telephone our sales team
on 020 8538 9090 or email info@coax-connectors.com
Colour Key
Cable Types (see page 48) Crimp Tool (see page 46)
Termination Method (see page 50) Stripping Dimensions (see page 47)
F Type Connectors
Low cost, threaded connector used for Satellite, Cable and CCTV. Most F
Type plugs use the centre conductor of the cable as the connector contact
rather than using a separate pin - this saves time and money to buy and
install this type of connector.
23
F Type Crimp/Crimp Plugs (3 Part)
For use with cables which do not have centre conductors which can be
used as the contact. Conventional hand crimp tools are required.
One piece with integral crimp for cable braid. Centre conductor is used as contact.
15-015-Z0-AI F Type Crimp Plug RG59, RG62, URM70, URM104, KX6, 9 336A A5
KX52, KX30
15-015-Z0-AL F Type Crimp Plug CT100, RG6, WSC100 9 336D A5
Bulk
15-015-Z0-AS F Type Crimp Plug RG7 9 A5
Bulk
15-015-Z0-CA F Type Crimp Plug CT100, RG6, WSC100 9 336D A5
15-015-Z0-CC F Type Crimp Plug CT125 9 106X A5
15-015-Z0-CE F Type Crimp Plug CT167 9 336K6 A5
15-027-Z0-CA F Type Crimp Plug CT100, RG6, WSC100 9 336D A5
F Type Adaptors
A range of in-series adaptors for joining and/or splitting cables or for
penetrating bulkheads. (see pages 44-45 for Inter Series Adaptors).
N Type Connectors
They were the first connectors capable of true microwave performance. They have
threaded coupling interfaces and the standard versions shown here have a 50ohm
impedance. N Types operate at frequencies up to 11GHz. Applications include antennas for
Telecom and Wireless, Broadcast, Test Equipment, Satellite and Military Communications
and Electronic Warfare. The less common 75ohm version is not inter-mateable with the
50ohm connectors and is not shown here.
quality and value for money. Straightforward termination using a standard crimp
tool for the contact and crimp sleeve.
25
aluminium centre conductor - it is important that this cladding is not damaged.
Easy Fit has a pre-loaded centre contact into the back of which the cable centre
conductor mates. The Top Hat Clamp offers a robust termination for the braid.
25-001 N Type Easy Fit Top Hat Clamp Plug LMR1200 6 N/A See Data Sheet
LMR1200
25-001-B3-DH N Type Easy Fit Top Hat Clamp Plug LMR600 6 N/A See Data Sheet
25-017-B3-DH N Type Easy Fit Top Hat Clamp Plug LMR600 3 N/A See Data Sheet
25-018-B3-DE N Type Easy Fit/Crimp Plug LMR400, RG8, Belden 9913, 3 N/A A1
TZC50032
25-002-A3-AH N Type Solder/Clamp Plug RG58, RG141, LMR195, URM43, 3 N/A See
URM76, WBC195, PSF1/6, KX15, Data
KX23 Sheet
25-002-B3-AN N Type Solder/Clamp Plug RG213, URM67, KX4 3 N/A See
Data
Sheet
CONTINUED >
25-001-B3-AH N Type Solder/Top Hat RG58, RG141, LMR195, URM43, 3 N/A See Data
Clamp Plug URM76, WBC195, PSF1/6, KX15, KX23 Sheet
25-001-B3-AK N Type Solder/Top Hat RG223 3 N/A See Data
Clamp Plug Sheet
25-001-B3-AN N Type Solder/Top Hat RG213, URM67, KX4 3 N/A See Data
Clamp Plug Sheet
25-001-B3-DE N Type Solder/Top Hat LMR400, RG8, Belden 9913, 3 N/A See Data
Clamp Plug TZC50032 Sheet
A range of jacks, for the most commonly used 50ohm cables, offering good
quality and value for money. Straightforward termination using a standard crimp
tool for the contact and crimp sleeve.
Two styles of jack using Easy Fit centre contacts - one with Clamp braid and
27
the other with Crimp braid.
25-067-B3-DH N Type Easy Fit Top Hat Clamp LMR600 6 N/A See Data
Jack Sheet
25-068-B3-DE N Type Easy Fit/Crimp Jack LMR400, RG8, Belden 9913, 5 336K A1
TZC50032
A range of jacks for the most commonly used 50ohm cables. Solder
termination of centre contacts is required but please refer to the table below
for braid termination methods.
25-050-B6-AI N Type Solder/Clamp Jack RG59, RG62, URM70, 3 N/A See Data
URM104, KX6, KX52, KX30 Sheet
25-051-B3-AN N Type Solder/Clamp Jack RG213, URM67, KX4 3 N/A See Data
Sheet
25-050-B3-AH N Type Solder/Top Hat Clamp Jack RG58, RG141, LMR195, 3 N/A See Data
URM43, URM76, WBC195, Sheet
PSF1/6, KX15, KX23
25-050-B3-AN N Type Solder/Top Hat Clamp Jack RG213, URM67, KX4 3 N/A See Data
Sheet
25-054-B3-DE N Type Solder/Crimp Jack LMR400, RG8, Belden 2 336K See Data
9913, TZC50032 Sheet
25-101-B3-AN N Type Right Angle Solder/Clamp RG213, URM67, KX4 3 N/A See Data Sheet
Plug (Hex Nut)
25-105-A3-AH N Type Right Angle Solder/Crimp Plug RG58, RG141, LMR195, 2 336A See Data Sheet
URM43, URM76, WBC195,
PSF1/6, KX15, KX23
25-105-A3-AK N Type Right Angle Solder/Crimp Plug RG223 2 336A See Data Sheet
25-105-B3-AD N Type Right Angle Solder/Crimp Plug RG174, RG188, RG316, 2 336A See Data Sheet
LMR100, WBC100,
URM95, KX22, KX3
CONTINUED >
25-105-B3-AE N Type Right Angle Solder/Crimp Plug RD316, RD188 2 336A See Data Sheet
25-105-B3-AN N Type Right Angle Solder/Crimp Plug RG213, URM67, KX4 2 336K See Data Sheet
25-105-B3-AO N Type Right Angle Solder/Crimp Plug RG214 2 336K See Data Sheet
25-109-B3-1-DE N Type Right Angle Solder/Crimp Plug LMR400, RG8, Belden 2 336K See Data Sheet
9913, TZC50032
25-109-B3-AO N Type Right Angle Solder/Crimp RG214 2 336K See Data Sheet
Plug (Hex Nut)
25-109-B3-DB N Type Right Angle Solder/Crimp LMR240 2 336K See Data Sheet
Plug (Hex Nut)
25-109-G3-1-DE N Type Right Angle Solder/Crimp LMR400, RG8, Belden 2 336K See Data Sheet
Plug (Hex Nut) 9913, TZC50032
25-110-B3-DE N Type Right Angle Solder/Crimp Plug LMR400, RG8, Belden 2 336K See Data Sheet
9913, TZC50032
These connectors have crimp contact and braid and are mounted into a
bulkhead cut-out using a nut, and washer.
25-255-B3-AD N Type Bulkhead Rear Mount RG174, RG188, RG316, LMR100, 1 336A A1
Crimp/Crimp Jack WBC100, URM95, KX22, KX3
25-255-B3-AH N Type Bulkhead Rear Mount RG58, RG141, LMR195, URM43, 1 336A A1
Crimp/Crimp Jack URM76, WBC195, PSF1/6, KX15, KX23
29
25-283-Q3-HA- N Type 4 hole (17mm Square) RG405(.085”) 4 N/A See Data
17.5mm Flange Solder/Solder Jack Sheet
N Type Adaptors
SMA Connectors
Precision, threaded, sub-miniature connectors designed to perform up to
frequencies of 18GHz (cable limited). Applications include Antennas, Wireless,
Test Equipment, Satellite and Military Communications, Avionics, Missiles,
Electronic Warfare, Telemetry and Microwave Waveguide Transitions. Standard
plating is gold for both body and contact. Other finishes available please contact
us for further information.
SMA Plugs
A range of plugs for the most commonly used flexible, semi-rigid and hand-
conformable 50ohm cables. Please see below table for termination methods.
30-005-B3-AD SMA Crimp/Crimp Straight Plug RG174, RG188, RG316, LMR100, 1 336J A3
(Nickel) WBC100, URM95, KX22, KX3,
30-005-B3-AH SMA Crimp/Crimp Straight Plug RG58, RG141, LMR195, URM43, 1 336A A3
(Nickel) URM76, WBC195, PSF1/6, KX15, KX23
30-005-B3-DB SMA Crimp/Crimp Straight Plug LMR240 1 336A A3
30-005-D3-AA SMA Crimp/Crimp Straight Plug RG178, RG196 1 336J A3
CONTINUED >
30-005-D3-AD SMA Crimp/Crimp Straight Plug RG174, RG188, RG316, LMR100, 1 336J A3
WBC100, URM95, KX22, KX3
30-005-D3-AE SMA Crimp/Crimp Straight Plug RD316, RD188 1 336J A3
30-005-D3-AH SMA Crimp/Crimp Straight Plug RG58, RG141, LMR195, URM43, 1 336A A3
URM76, WBC195, PSF1/6, KX15, KX23
30-005-D3-AK SMA Crimp/Crimp Straight Plug RG223 1 336A A3
30-005-D3-DA SMA Crimp/Crimp Straight Plug LMR200 1 336A A3
30-018-B3-DE SMA EasyFit/Crimp Straight Plug LMR400, RG8, Belden 9913, 5 336K A4
TZC50032,
30-014-D3-HA SMA Straight Solder Plug RG405(.085”) 4 N/A See Data
Sheet
30-014-D3-HB SMA Straight Solder Plug RG402 (.141”) 4 N/A See Data
Sheet
A range of SMA jacks which will mate with any SMA plug. The table below
gives details of the main 50ohm cable types and termination methods. If you
cannot find what you require telephone our Engineers on 020 8538 9090 or
email info@coax-connectors.com.
30-054-D3-AD SMA Crimp/Crimp Straight Jack RG174, RG188, RG316, LMR100, 1 336J A3
WBC100, URM95, KX22, KX3
30-054-D3-AE SMA Crimp/Crimp Straight Jack RD316, RD188 1 336J A3
30
30-054-D3-AH SMA Crimp/Crimp Straight Jack RG58, RG141, LMR195, URM43, 1 336A A3
URM76, WBC195, PSF1/6, KX15, KX23
30-054-D3-AK SMA Crimp/Crimp Straight Jack RG223 1 336A A3
30-069-D3-AD SMA Crimp/Crimp Straight Jack RG174, RG188, RG316, LMR100, 1 336J A3
WBC100, URM95, KX22, KX3
30-068-B3-DE SMA EasyFit/Crimp Straight Jack LMR400, RG8, Belden 9913, 5 336K See Data
TZC50032 Sheet
30-105-D3-AD SMA Right Angle Solder/Crimp Plug RG174, RG188, RG316, LMR100, 2 336J A6
WBC100, URM95, KX22, KX3,
30-105-D3-AE SMA Right Angle Solder/Crimp Plug RD316, RD188 2 336J A6
30-105-D3-AH SMA Right Angle Solder/Crimp Plug RG58, RG141, LMR195, URM43, 2 336A A6
URM76, WBC195, PSF1/6, KX15, KX23
30-105-D3-AK SMA Right Angle Solder/Crimp Plug RG223 2 336A A6
30-108-D3-HA SMA Right Angle Solder/Solder RG405 (.085”) 4 N/A See Data
31
Plug Sheet
30-108-D3-HB SMA Right Angle Solder/Solder RG402 (.141”) 4 N/A See Data
Plug Sheet
These connectors are mounted into a bulkhead cut-out and secured using a nut
and washer. Refer to the table below for cable types and termination methods.
30-254-D3-AD SMA Bulkhead Rear Mount RG174, RG188, RG316, LMR100, 1 336J A3
Crimp/Crimp Jack WBC100, URM95, KX22, KX3,
30-254-D3-AH SMA Bulkhead Rear Mount RG58, RG141, LMR195, URM43, 1 336A A3
Crimp/Crimp Jack URM76, WBC195, PSF1/6, KX15, KX23
30-254-D3-AK SMA Bulkhead Rear Mount RG223 1 336A A3
Crimp/Crimp Jack
30-256-B3-AA SMA Bulkhead Rear Mount RG178, RG196 1 336J A3
Crimp/Crimp Jack (Nickel)
30-256-D3-AA SMA Bulkhead Rear Mount RG178, RG196 1 336J A3
Crimp/Crimp Jack
30-266-D3-HA SMA Bulkhead Rear Mount RG405(.085”) 4 N/A See Data
Solder/Solder Jack Sheet
These are standard size SMA plugs fitted with a female contact. This means
they cannot be mated with a standard SMA jack. They are generally used to
prevent a lead being connected to the wrong Input/Output device.
31-005-A3-AD SMA Reverse Polarity Crimp/ RG174, RG188, RG316, LMR100, 1 336J A3
Crimp Plug (Nickel) WBC100, URM95, KX22, KX3
31-005-B3-AH SMA Reverse Polarity Crimp/ RG58, RG141, LMR195, URM43, 1 336A A3
Crimp Plug URM76, WBC195, PSF1/6, KX15, KX23
31-005-D3-AD SMA Reverse Polarity Crimp/ RG174, RG188, RG316, LMR100, 1 336J A3
Crimp Plug WBC100, URM95, KX22, KX3
31-005-D3-AH SMA Reverse Polarity Crimp/ RG58, RG141, LMR195, URM43, 1 336A A3
Crimp Plug URM76, WBC195, PSF1/6, KX15, KX23
31-005-D3-AK SMA Reverse Polarity Crimp/ RG223 1 336A A3
Crimp Plug
SMA Reverse Polarity Crimp/Crimp Jacks
These are standard size SMA jacks fitted with a male contact. They can only be
mated with a SMA reverse polarity plug - used to help prevent the wrong leads
or devices being connected together.
31-054-A3-AD SMA Reverse Polarity Crimp/ RG174, RG188, RG316, LMR100, 1 336J A3
Crimp Plug (Nickel) WBC100, URM95, KX22, KX3
31-054-A3-AH SMA Reverse Polarity Crimp/ RG58, RG141, LMR195, URM43, 1 336A A3
Crimp Plug (Nickel) URM76, WBC195, PSF1/6, KX15, KX23
31-054-D3-AD SMA Reverse Polarity Crimp/ RG174, RG188, RG316, LMR100, 1 336J A3
Crimp Plug WBC100, URM95, KX22, KX3
31-054-D3-AH SMA Reverse Polarity Crimp/ RG58, RG141, LMR195, URM43, 1 336A A3
Crimp Plug URM76, WBC195, PSF1/6, KX15, KX23
31-105-D3-AH SMA Reverse Polarity Right RG58, RG141, LMR195, URM43, 2 336A A3
Angle Solder/Crimp Plug URM76, WBC195, PSF1/6, KX15, KX23
31-254-1-D3- SMA Reverse Polarity Bulkhead RG58, RG141, LMR195, URM43, 1 336A A3
AH Rear Mount Crimp/Crimp Jack URM76, WBC195, PSF1/6, KX15, KX23
31-254-D3-AD SMA Reverse Polarity Bulkhead RG174, RG188, RG316, LMR100, 1 336J A3
Rear Mount Crimp/Crimp Jack WBC100, URM95, KX22, KX3
SMA Adaptors
A range of in-series adaptors for joining and/or splitting cables or for penetrating
bulkheads. (see pages 44-45 for Inter Series Adaptors)
33
SMA PCBs
A range of SMA jacks for direct soldering to PCBs. There are various versions
including through-hole, surface mount and end launch. Please see the table
below for further details. If you cannot find what you require telephone our
Engineers on 020 8538 9090 or email info@coax-connectors.com.
Part No.
SMB Connectors
A sub-miniature connector offering a quick connect/disconnect interface. A self-
centring outer spring and overlapping dielectric allow for easy snap-on mating and
good performance under moderate vibration. The versions for 50ohm and 75ohm
cables shown here are intermateable. Applications include inter-board connections
in Test, Communications, Telemetry and Asset Tracking.
A range of plugs for the more popular 50ohm and 75ohm cables.
32-005-D3-AB SMB Straight Crimp/Crimp Plug RG179, RG187, Belden 179DT 1 336J A3
CONTINUED >
32-005-D3-AD SMB Straight Crimp/Crimp Plug RG174, RG188, RG316, LMR100, 1 336J A3
WBC100, URM95, KX22, KX3
32-005-D3-AH SMB Straight Crimp/Crimp Plug RG58, RG141, LMR195, URM43, 1 336A A3
URM76, WBC195, PSF1/6, KX15, KX23
32-008-A3-AE SMB Straight Crimp/Crimp Plug RD316, RD188 1 336J A3
32-010-D0-AB SMB Straight Crimp/Crimp Plug RG179, RG187, Belden 179DT 1 336J A3
32-010-D0-BD SMB Straight Crimp/Crimp Plug BT3002, TZC75024, TZC75025 1 HTS-43 A3
Two straight SMB jacks for the two most popular 50ohm and 75ohm
miniature cables.
32-054-B3-AB SMB Straight Crimp/Crimp Jack RG179, RG187, Belden 179DT 1 336J A3
32-054-B3-AD SMB Straight Crimp/Crimp Jack RG174, RG188, RG316, LMR100, 1 336J A3
WBC100, URM95, KX22, KX3
These connectors are mounted into a bulkhead cut-out and secured using a nut
and washer. The table below shows the two most popular 50ohm versions.
32-254-A3-AD SMB Bulkhead Rear Mount RG174, RG188, RG316, LMR100, 1 336J A3
Crimp/Crimp Jack WBC100, URM95, KX22, KX3
32-254-D3-AA SMB Bulkhead Rear Mount RG178, RG196 1 336J A3
Crimp/Crimp Jack
SMB Adaptors
35
penetrating bulkheads. (see pages 44-45 for Inter Series Adaptors)
MCX Connectors
These connectors use a similar snap-on mating as the SMB. However, by reversing
the coupling spring design, the MCX achieves about 30% reduction in size and
weight. It also has an increased frequency range to 6GHz. This means it is ideally
suited to replace the SMB where size, weight and performance are issues.
Applications include GPS, Automotive, Mobile Communications and Data Telemetry.
A range of plugs for the more popular cables used with MCX connectors.
45-005-A0-AB MCX Straight Crimp/Crimp Plug RG179, RG187, Belden 179DT 1 336J A4
45-005-D3-AD MCX Straight Crimp/Crimp Plug RG174, RG188, RG316, LMR100, 1 336J A4
WBC100, URM95, KX22, KX3
45-014-D3-HA MCX Straight Solder/Solder Plug RG405(.085”) 4 N/A See Data
Sheet
A MCX jack for terminating the most popular 50ohm miniature cables.
45-054-D3-AD MCX Straight Crimp/Crimp Jack RG174, RG188, RG316, LMR100, 1 336J A4
WBC100, URM95, KX22, KX3
MCX Right Angle Solder Plug
MCX Right Angle Plugs are generally more widely used than the straight
versions. There are two main reasons for this: one, space saving because no
minimum cable bend radius is required; and two, there is less risk of pulling out
the cable when un-mating a right angle connector.
These connectors are mounted into a single hole, bulkhead cut-out and
secured using a nut and washer.
36
45-254-D3-AD MCX Bulkhead Rear Mount RG174, RG188, RG316, LMR100, 1 336J A4
Crimp/Crimp Jack WBC100, URM95, KX22, KX3
MCX PCBs
Colour Key
Cable Types (see page 48) Crimp Tool (see page 46)
Termination Method (see page 50) Stripping Dimensions (see page 47)
MMCX Connectors
With the continuing miniaturisation of electronic devices a smaller lighter
alternative to the MCX was required. The MMCX offers this with no loss of electrical
performance. Applications include Asset Tracking, Wireless Telemetry, Test and GPS.
37
MMCX Straight Plug
A range of plugs for the more popular cables used with MMCX cables.
See the table below for full details.
MMCX jacks for terminating the more popular miniature flexible cables.
Even though MMCX straight plugs are small, the right angle version achieves
even more space saving by avoiding the need to allow for a cable bend.
47-254-D3-AB MMCX Bulkhead Rear Mount RG179, RG187, Belden 179DT 1 336J A4
Crimp/Crimp Jack
MMCX PCBs
1.0-2.3 Connectors
Designed to a DIN specification these connectors are widely used in European
Telecoms and, increasingly, in Broadcast because of their small size compared to
the industry standard BNC. However they were originally a 50ohm connector and
are therefore not always suitable for use with some of the higher specification
Telecoms and Broadcast cables. Coax Connectors has designed a True 75ohm
range for Broadcast and other applications where good performance in a 75ohm
environment is critical.
39
52-005-B6-BH 1.0/2.3 Crimp/Crimp Plug Belden735A, CT1320 1 HTS-43 A2
- Bulk 100 True 75ohm 3Ghz
52-005-B6-EH 1.0/2.3 Crimp/Crimp Plug Flex3 1 HTS-75 A2
- Bulk 100 True 75ohm 3Ghz
52-005-B6-FA 1.0/2.3 Crimp/Crimp Plug Belden 1855ENH, Draka 0.6/2.8AF, 1 HTS-43 A2
- Bulk 100 True 75ohm 3Ghz BDSD01, Image360
Right Angle plugs generally offer space saving over straight plugs because the need to allow for
a cable bend radius is avoided.
Right Angle jacks generally offer space saving over straight jacks because the
need to allow for a cable bend radius is avoided.
52-271-D3-AB 1.0/2.3 Right Angle Solder/ RG179, RG187, Belden 179DT 2 336J A6
Crimp Jack
52-271-D3-BD 1.0/2.3 Right Angle Solder/ BT3002, TZC75024, TZC75025 2 336J A6
Crimp Jack
These connectors are mounted into a single hole, bulkhead cut-out and secured using a nut
and washer.
52-254-D6-AB 1.0/2.3 Bulkhead Rear Mount RG179, RG187, Belden 179DT 1 336J A3
Crimp/Crimp Jack
52-254-D6-BC 1.0/2.3 Bulkhead Rear Mount BT2003, PSF 1/3 1 336A A3
Crimp/Crimp Jack
1.6-5.6 Connectors
A 75ohm DIN connector widely used for the transfer of radio frequency
analogue and digital signals in modern telecommunications equipment.
53-005-B36- 1.6/5.6 Straight Crimp/Crimp Plug True 75ohm RG179, RG187, Belden 179DT 1 336J A1
AB
53-005-B6-AB 1.6/5.6 Straight Crimp/Crimp Plug 75ohm RG179, RG187, Belden 179DT 1 336J A1
53-005-B6-AI 1.6/5.6 Straight Crimp/Crimp Plug 75ohm RG59, RG62, URM70, 1 336A A1
URM104, KX6, KX52, KX30
53-005-B6-BD 1.6/5.6 Straight Crimp/Crimp Plug 75ohm BT3002, TZC75024, TZC75025 1 VC A1
53-005-B6-BF 1.6/5.6 Straight Crimp/Crimp Plug 75ohm BT7000, RA7000 1 VQ A1
53-005-B6-EH 1.6/5.6 Straight Crimp/Crimp Plug 75ohm Flex3 1 336J A1
53-105-B6-AB 1.6/5.6 Right Angle Solder/ RG179, RG187, Belden 179DT 2 336J A8
Crimp Plug 75ohm
53-105-B6-AI 1.6/5.6 Right Angle Solder/ RG59, RG62, URM70, URM104, KX6, 2 336A A8
Crimp Plug 75ohm KX52, KX30
53-105-B6-BD 1.6/5.6 Right Angle Solder/ BT3002, TZC75024, TZC75025 2 VC A8
Crimp Plug 75ohm
53-105-B6-BF 1.6/5.6 Right Angle Solder/ BT7000, RA7000 2 VQ A8
Crimp Plug 75ohm
53-271-B6 BD 1.6/5.6 Right Angle Bulkhead BT3002, TZC75024, TZC75025 2 VC A8
Solder/Crimp Jack 75 ohm
These connectors are mounted into a single hole, bulkhead cut-out and secured
using a nut and washer.
See the table below for details. If you cannot find what you require telephone our Engineers on
41
020 8538 9090 or email info@coax-connectors.com.
Type 43 Connectors
Originally designed for BT as a latching, and therefore more secure, version of
the SMB these connectors are widely used in Telecommunications - especially in
Telephone Exchanges and Cabinets. There are three sizes: Standard Density; High
Density; and Ultra High Density.
Type 43 standard plugs to fit the most popular 75ohm telecom cables. They are
bulkhead mounting by clicking into place by hand - a tool is required to extract
them again.
Smaller than the standard plugs, these connectors offer a higher density of
connectors in a distribution frame. Available to fit most telecom coaxial cables
they are the most popular density of Type 43 in current use. See page 45 for
details of extraction tool.
Standard FS Sockets
HDC FS Sockets
42
UHDC FS Sockets
43
A range of cable mounted sockets to mate with corresponding bulkhead plugs
and offering space saving over straight versions which require room for a cable
bend radius.
Type 43 Adaptors
Standard, High Density and Ultra High Density ‘U’ Links for connecting adjacent
bulkhead plugs in an exchange or cabinet. Some are fitted with a test port. For
connecting non-adjacent plugs use a patch lead (contact our Sales on 020 8538
9090 for details). Also shown below is an adaptor for joining Type 43 sockets
to BNC jacks.
45
74-2225-534 FME Plug to N Type Jack
74-2530-500 N Type Jack to SMA Jack
74-2530-501-B3 N Type Bulkhead Jack to SMA Jack
74-2530-506 N Type Jack to SMA Jack (4 hole flange)
74-2530-511 N Type Plug to SMA Jack
74-2530-514 N Type Plug to SMA Plug
74-2530-534 N Type Jack to SMA Plug
74-2555-500-E3 N Type Jack to 7/16 Jack
74-2555-511-P3 N Plug to 7/16 Jack
74-2555-534 N Type Jack to 7/16 Plug
74-2584-534-G3 N Type Jack to LC Plug (Silver)
Tooling
A selection of cost effective tooling to support our ranges of connectors.
Extraction Tools
Cable Stripper
Hand held rotary cable strippers for preparing cables to terminate with connectors.
CONTINUED >
96-322 Rotary Cable Stripper, RG58, 59, URM70
96-332D Rotary Cable Stripper, RG179
General
Crimp Tools
A wide range of hand held crimp tools for centre contacts and/or crimp sleeves
for most of the crimp connectors we manufacture. The connector pages of this
catalogue show which tool is required for each connector.
47
A1) A2)
A3) A4)
A5) A6)
A7) A8)
Cable Types
Coax Connectors stocks and supplies a wide range of flexible low loss and other
signal cables. These cables can be supplied on reels, cut to length ready prepared
for your termination or already made into cable assemblies. Contact us on
020 8538 9090 to discuss your exact requirements.
49
FLEX 3 75 3.7 PE 2.3 BC 0.40
Belden 1855A 75 4.04 FPE 2.59 BC 0.58
BELDEN MINI RG59 75 4.15 FPE 2.9 BC 0.64
BLACK
Belden 1855ENH 75 4.45 FPE 2.8 BC 0.64
Draka 0.6/2.8AF 75 4.5 FPE 2.8 BC 0.6
RAYDEX RA7000 75 4.5 FPE 2.8 BC 0.61 Double braid
Belden 1505A 75 5.92 FPE 3.68 BC 0.81
Belden 1505F 75 6.15 FPE 3.68 BC 0.79 Double braid
MIL 17/29 RG59 75 6.15 PE 3.71 BCCS 0.57
BT2003 75 6.65 PE 3.7 BC 0.61 Double braid
Belden 1694A 75 6.96 FPE 4.57 BC 1.02
Draka 1.0/4.8AF 75 7 FPE 4.8 BC 1
Belden 1694F 75 7.01 FPE 4.57 BC 1.02 Double braid
CT125 75 7.8 ASPE 5.5 BC 1.25
MIL 17/2 RG6 75 8.43 PE 4.7 BCCS 0.72
Belden 7731A 75 10.16 FPE 7.11 BC 1.63
Draka 1.6/7.3AF 75 10.3 FPE 7.3 BC 1.6
KEY:
BC Bare Copper SCCS Silver Covered Copper Clad Steel
TC Tinned Copper PE Solid Low Density Polyethylene
SC Silver Covered Copper FPE Gas Injected Foam Polyethylene
BCCS Bare Copper Clad Steel PTFE Solid Polytetrafluroethylene
BCCAI Bare Copper Clad Aluminium
Cable Boots
Part Number Cable Type Type
97-800-XX-05 RG58 Available in 10 colours: Black
(BK), Brown (BN), Blue (BU),
97-800-XX-06 RG59 Green (GN), Grey (GY), Orange
(OR), Red (RE), Violet (VI),
White (WH) and Yellow (YE)
97-800-XX-03 RG174/179 Available in 5 colours: BK, BU,
GN, RE, YE
Termination Methods
Successful signal transmission relies on correct cable termination. The table below
indicates the correct tools you will require for each type of termination process,
Crimp Tools can be obtained from our Sales Department. Further information can be
obtained by viewing our website (www.coax-connectors.com) or contacting one of
our technical team.
2 Solder Crimp Yes Yes Yes Yes Contact could be loose or pre-
fitted into connector body
3 Solder Clamp Yes Yes Yes Yes There are various types of
clamping arrangements - see
online Assembly Instructions for
more information
5 Easy Fit Crimp Yes Yes Yes For Contact pre-fitted into connector
preparation and ‘mates’ with prepared cable
of centre centre conductor
50
conductor
6 Easy Fit Clamp Yes Yes Yes For Contact pre-fitted into connector
preparation and ‘mates’ with prepared cable
of centre centre conductor
conductor
Without compromise
For reliable, high quality connectors from an ISO 9001:2008 approved company where
performance counts, Coax Connectors Ltd provides the answer.
Issue A00