Professional Documents
Culture Documents
Norma JDS 117
Norma JDS 117
— WITHDRAWN —
W JDS 117 is withdrawn and replaced by JDM F23. No drawing changes are required due to the withdrawal
of JDS 117. If a drawing specifying JDS 117 is being revised for other reasons, review the plating note
and update appropriately.
W
I The requirements for JDM F23 shall be met with the following clarifications. I
T T
If a part with JDS 117 designation is a fastener as defined by JDM F23, requirements shall be
in accordance with JDM F15 and Table 1 of this withdrawal notice.
If a part with JDS 117 designation is a hydraulic tube or hydraulic connector, requirements shall
H H
be in accordance with JDM F19 and Table 1 of this withdrawal notice.
Table 1 lists the JDM F23 and JDM F19 replacement color appearance conversion coating designations
D D
for all JDS 117 designated conversion coatings.
R R
Former JDS 117 JDM F23 Replacement JDM F19 Replacement
Chromate Conversion Conversion Coating Conversion Coating
Coating Designation Designation Designation
A 1
A
C
C
A
A
A
W B
2
C
C
A
A
W
N N
C C A
D C A
F F B
The designation of zinc cobalt coating is discontinued and zinc cobalt coating shall not be applied to
John Deere parts or assemblies. Table 2 provides a cross-reference from JDS 117 coating designations
to the JDM F15 coating designations.
T T
JDS 117 Fe/ZnCo 5c F JDM F15 A2S
JDS 117 Fe/ZnCo 8c C JDM F15 A3C
H H
JDS 117 Fe/ZnCo 8c F JDM F15 A3S
JDS 117 Fe/ZnCo 12c C JDM F15 A4C
JDS 117 Fe/ZnCo 12c F JDM F15 A4S
D D
R R
A A
W W
N N