Professional Documents
Culture Documents
Moti CMC 2000
Moti CMC 2000
Note:
The intention of this guide is to provide quick instructions to key tasks of the
Motic Images 2000 software. If more detail is needed or what you are looking
for is not contained in this guide, please consult Help that comes with your
software or visit our website http://www.motic.com.
Installation Instructions
Before installing Motic MC2000, please read this chapter carefully, and perform setup by
following the step-by-step instructions.
1
Select the item "Include this location in the
search", and then insert the CD. Click
"Browse" to select the driver.
2
The Wizard will then search for the desired
files, please wait…..
3
Click "Finish" to complete installation of the
MC2000 driver.
4
After installing the USB2.0 Port PCI Card,
the system will search for the USB2.0 Port
PCI Card automatically.
Click “Next”.
5
Click “Browse”.
Click “OK”.
Click “Next”.
6
Click “Finish”.
Motic MC2000
1. Before using Motic MC2000, select MC2000Camera.exe from the Settings options.
3. Through the Control panel, easily alter the quality and effects of the image shown in the
preview window.
4. From the Toolbar, click the Capture button to capture the real-time image shown
in the preview window.
7
The image captured will be saved in the Temp
folder under the current user.
5. Click the Auto Capture button (next to the Capture button) to automatically capture a
number of images.
8
7. Motic MC2000 enables you to adjust
Brightness, Contrast and Saturation. If you
alter the brightness or switch specimens
during observation, use Auto Exposure and
White Balance to adjust the image.
View ROI
9. Motic MC2000 also provides a Real-time Image Preview function. From the Toolbar, click
to select different filters with which to either process the whole image or just the
defined region.
9
10. Motic MC2000 has the ability to capture clear and sharp images even in situations where
there is not enough light. From the Settings panel, users may also apply many other capture
settings.
10
目 录
1. 安装指导···································································· 1
驱动程序的安装 ······················································· 1
USB2.0 Port PCI Card 与驱动程序的安装 ························· 4
注意
本向导的目的是提供 Motic MC1000 软件主要功能的快速指导说明 如果您需要
更详细的说明 或者您需要得到解答的问题在本向导的涵盖内容之外 请参考
软件的联机帮助或者访问我们的网站 http://www.motic.com
安 装 指 导
请在软件使用前认真阅读安装指导 并在安装过程中严格按照下述步骤执行
使用前的准备工作
1. Motic MC 2000 设备配套的 USB2.0 Port PCI Card 已经安装好
2. Motic MC 2000 设备配套的视频线与计算机没有连接
确定 MC2000 与计算机连接好 这时
会出现 找到新的硬件向导 对话框
选择 从列表或指定位置安装 按 下
一步 按钮继续安装
1
选择 在搜索中包括这个位置 这一项
然后在光驱中放入安装盘 按 浏览
按钮选择驱动程序
在光盘中找到 MC1000AndMC2000”文
件夹 然后点击 确定 按钮
确认对话框中的路径后 然后点击 下
一步 按钮
2
点击 仍然继续 按钮继续下一步的安
装
安装向导正在把驱动程序安装文件复制
到电脑上
按 完成 按钮 完成安装 MC2000 的
驱动程序
3
在 Windows 2000 操作系统下安装 USB2.0 Port PCI Card 与驱动程序
点击 下一步 按钮
4
选择 “搜索…”以后 点击 “下一步” 按
钮
选择 “指定位置”, 点击 下一步 按钮
点击 浏览 按钮
选择光盘目录 Nec\uPD720100 后 点击 打
开 回到上一个界面
5
点击 确定
点击 “ 下一步”
点击 “完成”
6
Motic MC2000
3. 对控制面板中的各项参数加以设置 可以改变预览窗口中的图像质量和效果
4. 点击窗口工具栏中的静态图像捕捉按钮 你将捕捉到预览窗口所见到
的实时图像
捕捉的图像将被存储在用户的
Temp文件夹下
7
6. Motic MC2000 还具有录像功能 点击工
具栏上的录像按钮 输入录像内容保存的
名称及存储位置 点击 确定
8. 同时还具有区域预览功能 如果在预览窗
口中拖动鼠标 划出一个方形区域 可以
预览已经选定的区域 再次点击该按钮可
以恢复全视场预览 如下图
8
区域预览/恢复(ROI)
将可以选择不同的过滤器对全局实时图像进行处理 也可在预览窗口中
对划出区域进行处理 如下图
9
© 2003 Motic China Group Co., Ltd. All rights reserved. Motic is a © 2003 Motic China Group Co., Ltd.版权所有。
registered trademark and service mark of Motic China Group Co., Ltd. Motic 是 Motic China Group Co., Ltd. 的 注 册 商 标 。
Microsoft, Windows logo are registered trademarks of Microsoft Microsoft, Windows 是 Microsoft Corporation 的注册商标。
Corporation. 所有其他产品及品牌均为其持有者的商标或注册商标。
Design Change:
The manufacturer reserves the right to make changes in instrument design in accordance with scientific and mechanical progress, without notice
设计更改:因为技术进步,生产商有权在设计上作出革新,不再另行通知。
SP010911 2003.07.20