Professional Documents
Culture Documents
Leaflet.N4.50.ENG June2017
Leaflet.N4.50.ENG June2017
N4.50
SpEcifications
Closed cooling
Operation type 4 strokes Diesel Cooling
with heat exchanger
15° Front down
Bore & Stroke 83 x 92.4 mm [3.27 x 3.64 in] Max mounting angle
15° Front up
12 Volt
Compression ratio 22 : 1 Alternator
120 Amp
Dry weight
Peak torque speed 1800 rpm 229 kg [504 lbs]
with TTMC35A
N4.50
35.42 kW [47.5 hp] at 2800 rpm
TECHNICAL DESCRIPTION PERFORMANCE CURVES
ENGINE BlocK optionAL EQUIPMENTS & accessoRIES POWER AT CRANKSHAFT
4 Cylinders in line Keel cooling adaptation [hp]
Gear-driven valve train Complete marine propulsion systems
40
Water cooled exhaust manifold Throttle and shift controls
FUEL SYSTEM Additional instrumentation, Flying bridge 30
Mechanical governor extension harness
20
Cam driven in-line injection pump Polyester frame (Sail Drive version)
Fuel feed pump with hand primer Engine mounting adaptation 10
Oil dipstick Complete fuel systems Power at calculated propeller load exp 3
Nanni Industries S.A.S. Technical data according to ISO 8665. This document is not
contractual. Nanni reserves the right to modify any of the
11, Avenue Mariotte - Zone Industrielle characteristics stated in this document without notice, in a
constant effort to improve the quality of its products. Images
33260 La Teste - France and illustrations may shown non standard equipements. All
combination of equipment & accessory are not available.
Tel: +33 (0)5 56 22 30 60 DGBXXC01007
Fax: +33 (0)5 56 22 30 79