Professional Documents
Culture Documents
0130-06898-01 Rev. A
Page 2
Software Installation Instructions
The following instructions apply to the Avid Xpress® Studio HD
universal installer. This installation takes approximately 45 minutes.
At this point, you should have followed the instructions in the
Avid Xpress Studio Hardware Setup Instructions poster. Your system
must be turned on and external hardware devices turned off.
For important information, see the ReadMe before you install the
Avid® software. The ReadMe is available from the installation DVD.
To view the ReadMe files, you must have Acrobat® Reader® Installed
on your system.
Page 3
3. The Avid Mojo™ and Mbox™ must be turned off (unplugged).
The Digi 002 must be connected, just not turned on.
4. Quit all active applications.
5. Insert the Avid Xpress Studio HD installation DVD.
The installer menu opens.
6. (Option) Click ReadMe/Browse DVD.
7. Click Install Products.
The Welcome Window opens.
8. Click Next.
9. Select your country in the Country Selection for License
Agreements window, and then click Next.
10. Enter your Customer Information, and then click Next.
The Choose Destination Location window opens.
11. Click Next.
The Application Data Location window opens.
12. Click Next.
13. Select the applications you want to install, and then click Next.
Two options are not selected: Avid Codecs LE and Adobe®
After Effects® (External Monitor Preview).
In order to install Avid AfterEffects EMP, you need to have
Adobe After Effects installed on your system.
The Ready to Install the Program window opens.
14. Click Install.
Avid Xpress Pro HD and its components install.
A dialog box opens stating that the driver has not passed the
Windows Logo testing; you can safely ignore the warning.
15. Click OK.
This dialog box opens several times throughout this installer.
Click Continue Anyway every time.
A dialog box opens stating that you need to install Windows
Media 9 after this installation.
16. Click OK.
17. Click Finish.
Page 4
When the Avid Pro Tools LE installer window opens, there are
several options selected for you to install. The two options that
are not selected — Command|8 Controller & Drivers and the
MP3 Codec must only be installed if you plan on having the
Command|8 control surface connected to your system. It is not
recommended that you install this option if you have a Digi 002
or Mbox. In order to install the MP3 Codec Update, you must
purchase the MP3 Codec through Digidesign®.
Page 5
Completing the Installation
Avid 3D and its components install.
1. Follow the on-screen instructions.
Avid FX and its components install.
2. Follow the on-screen instructions.
Avid DVD by Sonic and its components install.
3. Follow the on-screen instructions.
Sorenson Squeeze and its components install.
4. You are prompted to enter a serial number for Sorenson Squeeze.
5. Locate the serial number in the DVD case, type it in, and then
click Next.
A dialog box opens asking you to install Windows Media Format
Runtime. If you have already installed Windows Media 10 from
step 1 of "Installing the Avid Applications" click Next and ignore
this message.
You are prompted to register Sorenson Squeeze.
6. When all products have been successfully installed, restart your
computer.
At this time you can view the Avid Xpress Studio HD ReadMe.
7. Click Finish.
Page 6
Inserting the Avid Application Key and iLok USB
Smart Key
1. Insert the Avid application key and then the iLok USB Smart Key
into the USB connections on your computer.
The Found New Hardware Wizard dialog box opens after the
iLok is inserted.
2. Follow the instructions in the Hardware Wizard, and then click
Finish.
Page 7
Instructions d'installation du logiciel
Les instructions suivantes concernent le programme d'installation
universel Avid Xpress Studio HD. L'installation prend environ 45
minutes. À ce stade, vous devriez avoir suivi les instructions du
document Instructions de configuration matérielle Avid Xpress Studio.
Vous devez mettre sous tension le système et mettre hors tension les
périphériques matériels externes.
Éléments requis :
• DVD d'installation Avid Xpress Studio HD ;
• Clé électronique (dongle) ;
• iLok USB Smart Key ;
• Carte de licence DV Toolkit ;
• Code d'autorisation Avid Pro Tools LE (indiqué sur le boîtier du
DVD) ;
• Numéro de série Sorenson Squeeze (indiqué sur le boîtier du
DVD).
Page 8
1. Vous ne pouvez exécuter un éditeur Avid que si votre système
dispose de Windows Media 10. Si vous n'avez pas installé
Windows Media 10 à partir du DVD d'installation, ouvrez le
dossier WindowsMediaInstall et cliquez sur wmfdist.exe.
2. Pour installer QuickTime 6.5, visitez le site www.quicktime.com
et suivez les instructions fournies.
3. Vous devez mettre hors tension les matériels Avid Mojo et Digi
002, ou vous devez déconnecter le Mbox.
Le Digi 002 doit également être connecté.
4. Fermez toutes les applications ouvertes.
5. Insérez le DVD d'installation Avid Xpress Studio HD.
Le menu d'installation s'ouvre.
6. (Facultatif) Cliquez sur Lisez-moi (ReadMe)/Parcourir le DVD
(Browse DVD).
7. Cliquez sur Installer les produits (Install Products).
La fenêtre d'accueil s'ouvre.
8. Cliquez sur Suivant (Next).
9. Dans la fenêtre de sélection du pays pour l'accord de licence,
sélectionnez votre pays, puis cliquez sur Suivant (Next).
10. Spécifiez vos informations de client (Customer Information),
puis cliquez sur Suivant (Next).
La fenêtre de sélection de l'emplacement de destination (Choose
Destination Location) s'affiche.
11. Cliquez sur Suivant (Next).
La fenêtre d'emplacement des données d'application (Application
Data Location ) s'affiche.
12. Cliquez sur Suivant (Next).
13. Sélectionnez les applications que vous désirez installer, puis
cliquez sur Suivant (Next).
Deux options ne sont pas sélectionnées : Avid Codecs LE et
Adobe After Effects (External Monitor Preview).
Vous ne pouvez installer Avid AfterEffects EMP que si votre
système dispose d'Adobe After Effects.
La fenêtre Prêt à installer le programme (Ready to Install the
program) s'ouvre.
14. Cliquez sur Installer (Install).
Page 9
L'installation d'Avid Xpress Pro HD et de ses éléments démarre.
Une boîte de dialogue indique que le pilote n'a pas obtenu la
certification Windows ; vous pouvez ignorer cet avertissement en
toute sécurité.
15. Cliquez sur OK.
La boîte de dialogue s'ouvre plusieurs fois au cours de
l'installation. Cliquez à chaque fois sur Continuer quand même
(Continue Anyway).
Une boîte de dialogue indique que vous devez installer Windows
Media 10 après l'installation.
16. Cliquez sur OK.
17. Cliquez sur Terminer (Finish).
Lorsque la fenêtre d'installation Avid Pro Tools LE s'ouvre,
plusieurs options sont sélectionnées pour l'installation. Vous ne
devez installer les deux options non sélectionnées (Command|8
Controller & Drivers et MP3 Codec) que si vous envisagez de
connecter la surface de contrôle Command|8 au système. Nous
vous conseillons de ne pas installer cette option si vous disposez
d'un Digi 002 ou d'une Mbox. Pour installer la mise à jour du
codec MP3 (MP3 Codec Update), vous devez acheter le codec
MP3 par l'intermédiaire de Digidesign.
Page 10
5. Une fois l'installation terminée, cliquez sur OK.
L'installation continue.
La fenêtre de certification Windows Logo s'ouvre.
6. Cliquez sur Continuer quand même (Continue Anyway).
Une boîte de dialogue indique que le programme d'installation de
pilote n'a pu détecter le matériel Avid. Voulez-vous essayer
d'installer le pilote à nouveau ?
7. Cliquez sur Non (No).
Finalisation de l'installation
L'installation d'Avid 3D et de ses éléments démarre.
1. Suivez les instructions affichées à l'écran.
L'installation d'Avid FX et de ses éléments démarre.
2. Suivez les instructions affichées à l'écran.
L’installation d'Avid DVD by Sonic et de ses éléments démarre.
3. Suivez les instructions affichées à l'écran.
L'installation de Sorenson Squeeze et de ses éléments démarre.
4. Vous êtes invité à fournir un numéro de série pour Sorenson
Squeeze.
5. Entrez le numéro de série indiqué sur le boîtier du DVD, puis
cliquez sur Suivant (Next).
Une boîte de dialogue vous demande d'installer Windows Media
Format Runtime. Si vous avez déjà installé Windows Media 10 à
l'étape 1 de la section Installation des applications Avid, ignorez
ce message et cliquez sur Suivant (Next).Vous êtes invité à
enregistrer Sorenson Squeeze.
6. Une fois tous les produits installés, redémarrez votre ordinateur.
À ce stade, vous pouvez consulter le fichier Lisez-moi (ReadMe)
d'Avid Xpress Studio HD.
7. Cliquez sur Terminer (Finish).
Page 11
Installation d'Avid Mojo (uniquement pour les
utilisateurs d'Avid Xpress Studio HD Complete)
1. Mettez sous tension votre Avid Mojo en le branchant à votre
ordinateur.
Attendez que l'Assistant de détection de nouveau matériel
(Found New Hardware Wizard) s'ouvre.
2. Dans la fenêtre d'accueil (Welcome), cliquez sur Suivant (Next).
3. Suivez les instructions de l'Assistant de matériel (Hardware
Wizard), puis cliquez sur Suivant (Next).
La fenêtre de certification Windows Logo s'ouvre.
4. Cliquez sur Continuer quand même (Continue Anyway).
5. Cliquez sur Terminer (Finish).
Page 12
5. Cliquez sur Suivant (Next).
Vous êtes invité à autoriser successivement trois autres modules
externes : VocALign, DV Toolkit et DigiTranslator.
6. Dans chaque fenêtre d'autorisation, cliquez sur Autoriser
(Authorize).
Vous êtes invité à enregistrer chaque module externe et l'iLok.
7. Une fois l'autorisation terminée, retirez la découpe du iLok.
8. Cliquez sur Terminer (Finish).
Vous êtes invité à spécifier le code d'autorisation de Pro Tools
LE.
9. Entrez le code d'autorisation indiqué sur le boîtier du DVD.
10. Cliquez sur Valider (Validate)
L'installation est terminée.
Page 13
Anleitung zur Installation der Software
Die folgende Anleitung gilt für den Universal-Installer für
Avid Xpress Studio HD. Sie dauert ungefähr 45 Minuten.
Voraussetzung ist, dass Sie die Hardware bereits wie auf dem Poster
mit den Anweisungen zum Hardware-Setup für Avid Xpress Studio
beschrieben installiert haben. Das System muss eingeschaltet sein, die
externen Hardwaregeräte müssen ausgeschaltet sein.
Vor der Installation von Avid Xpress Studio HD sollten Sie Windows
Media 10 und QuickTime 6.5 oder höher installieren.
Page 14
1. Damit Sie ein Avid-Bearbeitungsprogramm ausführen können,
muss Windows Media 10 auf Ihrem System installiert sein. Wenn
Windows Media 10 nicht auf Ihrem System installiert ist, öffnen
Sie auf der Installations-DVD den Ordner WindowsMediaInstall
und klicken auf wmfdist.exe.
2. Um QuickTime 6.5 zu installieren, besuchen Sie
www.quicktime.com und führen die Anweisungen auf der
Website aus.
3. Der Avid Mojo und die Digi 002 müssen ausgeschaltet sein oder
die Mbox muss getrennt sein.
Die Digi 002 muss angeschlossen, aber ausgeschaltet sein.
4. Beenden Sie alle Anwendungen.
5. Legen Sie die Installations-DVD für Avid Xpress Studio HD ein.
Das Installationsmenü wird geöffnet.
6. (Optional) Klicken Sie auf „ReadMe/DVD durchsuchen“
(ReadMe/Browse DVD).
7. Klicken Sie auf „Produkte installieren“ (Install Products).
Der Begrüßungsbildschirm wird geöffnet.
8. Klicken Sie auf „Weiter“ (Next).
9. Wählen Sie im Fenster „Land für Lizenzvertrag wählen“
(Country Selection for License Agreement) Ihr Land und klicken
Sie auf „Weiter“ (Next).
10. Geben Sie Ihre Kundendaten ein und klicken Sie auf „Weiter“
(Next).
Das Fenster „Zielspeicherort wählen“ (Choose Destination
Location) wird geöffnet.
11. Klicken Sie auf „Weiter“ (Next).
Das Fenster „Speicherort für Anwendungsdaten“ (Application
Data Location) wird geöffnet.
12. Klicken Sie auf „Weiter“ (Next).
13. Wählen Sie die Anwendungen, die Sie installieren möchten, und
klicken Sie auf „Weiter“ (Next).
Zwei Optionen sind nicht markiert: Avid Codecs LE und Adobe
After Effects EMP (External Monitor Preview).
Für Avid AfterEffects EMP muss Adobe After Effects auf Ihrem
System installiert sein.
Page 15
Das Fenster „Das Programm kann jetzt installiert werden“
(Ready to install the program) wird geöffnet.
14. Klicken Sie auf „Installieren“ (Install).
Avid Xpress Pro HD und die dazugehörigen Komponenten
werden installiert.
Es erscheint eine Warnmeldung, in der darauf hingewiesen wird,
dass der Treiber den Windows Logo-Test nicht bestanden hat.
Diese Warnung können sie ignorieren.
15. Klicken Sie auf „OK“.
Dieses Dialogfeld wird mehrfach während der Installation
angezeigt. Klicken Sie jedes Mal auf „Trotzdem fortfahren“
(Continue Anyway).
Ein Dialogfeld wird eingeblendet, in dem Sie darauf hingewiesen
werden, dass Sie nach dieser Installation Windows Media 10
installieren müssen.
16. Klicken Sie auf „OK“.
17. Klicken Sie auf „Fertig stellen“ (Finish).
Wenn das Installationsfenster für Avid Pro Tools LE geöffnet
wird, sind einige Optionen bereits zur Installation ausgewählt.
Zwei Optionen sind nicht ausgewählt: Command|8 Controller &
Drivers und MP3 Codec. Installieren Sie diese nur, wenn Sie
beabsichtigen, die Bedienoberfläche Command|8 an Ihr System
anzuschließen. Für die Digi 002 oder die Mbox wird diese
Option nicht empfohlen. Um das MP3 Codec Update zu
installieren, müssen Sie den MP3 Codec erwerben. Sie erhalten
ihn bei Digidesign.
Page 16
3. Kehren Sie zu dem Dialogfeld zurück, in dem darauf
hingewiesen wird, dass die Digidesign-Hardware nicht gefunden
wurde, und klicken Sie auf „Ja“ (Yes).
In einem weiteren Dialogfeld wird überprüft, ob die Digidesign-
Hardware angeschlossen ist.
4. Klicken Sie auf „OK“.
Der Hardware-Assistent setzt die Installation der Digidesign-
Hardware fort.
5. Klicken Sie nach Abschluss der Installation auf „OK“.
Die Installation wird fortgesetzt.
Das Windows Logo-Testfenster wird geöffnet.
6. Klicken Sie auf „Trotzdem fortfahren“ (Continue Anyway).
Ein Dialogfeld wird eingeblendet, in dem darauf hingewiesen
wird, dass das Treiber-Installationsprogramm die Avid-Hardware
nicht gefunden hat, und in dem Sie gefragt werden, ob Sie die
Treiberinstallation erneut versuchen möchten.
7. Klicken Sie auf „Nein“ (No).
Page 17
Installationsanweisungen für die Avid-Anwendungen installiert
haben, ignorieren Sie diese Meldung und klicken auf "Weiter"
(Next).
Sie werden aufgefordert, Sorenson Squeeze zu registrieren.
6. Wenn Sie alle Produkte installiert haben, starten Sie den
Computer neu.
Sie können jetzt die ReadMe-Datei zu Avid Xpress Studio HD
lesen.
7. Klicken Sie auf „Fertig stellen“ (Finish).
Page 18
2. Klicken Sie auf „Autorisieren“ (Authorize).
Sie werden aufgefordert, die Lizenzkarte für DV Toolkit in den
iLok USB Smart Key einzulegen.
3. Drücken Sie die Lizenzkarte mit dem Daumen nach oben aus der
größeren Karte heraus. Drücken Sie sie nicht gewaltsam nach
unten.
4. Legen Sie die Lizenzkarte in den iLok ein. Überprüfen Sie, dass
der metallene Teil der Karte den metallenen Kartenleser des iLok
berührt.
5. Klicken Sie auf „Weiter“ (Next).
Sie werden dreimal aufgefordert, weitere Plug-Ins zu
autorisieren: VocALign, DV Toolkit und DigiTranslator.
6. Klicken Sie in jedem Autorisierungsfenster auf „Autorisieren“
(Authorize).
Sie werden aufgefordert, die einzelnen Plug-Ins und den iLok zu
registrieren.
7. Wenn die Autorisierung abgeschlossen ist, nehmen Sie die Karte
aus dem iLok heraus.
8. Klicken Sie auf „Fertig stellen“ (Finish).
Sie werden zur Eingabe des Autorisierungscodes für Pro Tools
LE aufgefordert.
9. Sie finden diesen Code im Etui der Installations-DVD.
10. Geben Sie den Code ein und klicken Sie auf „Überprüfen“
(Validate).
Damit ist die Installation abgeschlossen.
Page 19
Istruzioni per l'installazione del software
Le seguenti istruzioni si riferiscono al programma universale di
installazione di Avid Xpress Studio HD. L'installazione richiede circa
45 minuti. Giunti a questa fase, è necessario avere seguito le istruzioni
fornite nella scheda Avid Xpress Studio - Istruzioni per l'impostazione
hardware. Il sistema deve essere acceso e i dispositivi hardware
esterni devono essere spenti.
Page 20
1. Per utilizzare un'applicazione di montaggio Avid, nel computer
deve essere installato Windows Media 10. Se tale applicazione
non è installata, aprire la cartella WindowsMediaInstall presente
nel DVD e fare clic su wmfdist.exe.
2. Per installare QuickTime 6.5, visualizzare il sito
www.quicktime.com e seguire le istruzioni fornite.
3. Avid Mojo e Digi 002 o Mbox devono essere spenti o Mbox deve
essere disconesso.
Digi 002 deve essere collegato, ma non acceso.
4. Chiudere tutte le applicazioni attive.
5. Inserire il DVD di installazione Avid Xpress Studio HD.
Viene visualizzato il menu del programma di installazione.
6. (Facoltativo) Fare clic su Leggimi/Sfoglia DVD (ReadMe/
Browse DVD).
7. Fare clic su Installa prodotti (Install Products).
Viene visualizzata la schermata di benvenuto.
8. Fare clic su Avanti (Next).
9. Nella schermata Selezione del Paese per l'accordo di licenza
(Country Selection for License Agreement), selezionare il
proprio Paese e fare clic su Next.
10. Compilare la sezione Informazioni cliente (Customer
Information), quindi fare clic su Avanti (Next).
Viene visualizzata la schermata Scegli percorso di destinazione
(Choose Destination Location).
11. Fare clic su Avanti (Next).
Viene visualizzata la schermata Percorso dati applicazione
(Application Data Location).
12. Fare clic su Avanti (Next).
13. Selezionare le applicazioni che si desidera installare, quindi fare
clic su Avanti (Next).
Non sono selezionate due opzioni: Avid Codecs LE e Adobe
After Effects (External Monitor Preview).
Per installare Avid AfterEffects EMP, nel computer deve essere
installato Avid After Effects.
Viene visualizzata la schermata È ora possibile installare il
programma (Ready to Install the program).
Page 21
14. Fare clic su Installa (Install).
Vengono installati Avid Xpress Pro HD e i relativi componenti.
Viene visualizzata una finestra di dialogo indicante che il driver
non ha superato il testing del programma Windows Logo.
Ignorare tale avviso.
15. Fare clic su OK.
Questa finestra di dialogo viene visualizzata più volte durante
l'installazione. Fare clic su Continua (Continue Anyway) ogni
volta.
Viene visualizzata una finestra di dialogo indicante che una volta
terminata l'installazione in corso sarà necessario installare
Windows Media 10.
16. Fare clic su OK.
17. Fare clic su Fine (Finish).
Nella schermata di installazione di Avid Pro Tools LE sono
selezionate varie opzioni relative a programmi da installare. Le
due opzioni non selezionate, Command|8 Controller & Drivers e
MP3 Codec devono essere installate solo se si intende collegare
al sistema una superficie di controllo. Non è consigliato installare
questa opzione se si dispone di Digi 002 o Mbox. Per installare
MP3 Codec Update, è necessario acquistare MP3 Codec
attraverso Digidesign.
Page 22
L'installazione prosegue.
Viene visualizzata la schermata del programma di testing
Windows Logo.
6. Fare clic su Continue Anyway.
Viene visualizzata una finestra di dialogo che indica che
l'hardware Avid non è stato trovato e richiede se si desidera
provare nuovamente a installare il driver.
7. Fare clic su No.
Completamento dell'installazione
Vengono installati Avid 3D e i relativi componenti.
1. Seguire le istruzioni visualizzate.
Vengono installati Avid FX e i relativi componenti.
2. Seguire le istruzioni visualizzate.
Vengono installati Avid DVD by Sonic e i relativi componenti.
3. Seguire le istruzioni visualizzate.
Vengono installati Sorenson Squeeze e i relativi componenti.
4. Viene richiesto di inserire un numero di serie per Sorenson
Squeeze.
5. Individuare il numero di serie riportato nella custodia del DVD,
immetterlo e fare clic su Avanti (Next).
Viene visualizzata una finestra di dialogo con la richiesta di
installare Windows Media Format Runtime. Se Windows Media
10 è già stato installato seguendo le istruzioni al punto 1 di
"Installazione dell'applicazione Avid", fare clic su Avanti (Next)
per ignorare questo messaggio.
Viene richiesto di effettuare la registrazione di Sorenson
Squeeze.
6. Una volta installati correttamente tutti i prodotti, riavviare il
computer.
A questo punto è possibile visualizzare il file Leggimi di
Avid Xpress Studio HD.
7. Fare clic su Fine (Finish).
Page 23
Installazione di Avid Mojo (solo per utenti di
Avid Xpress Studio HD Complete)
1. Accendere Avid Mojo per collegarlo.
Attendere che venga visualizzata la finestra Installazione guidata
nuovo hardware.
2. Nella schermata di benvenuto fare clic su Next.
3. Seguire le istruzioni visualizzate nella procedura guidata di
installazione, quindi fare clic su Next.
Viene visualizzata la schermata del programma di testing
Windows Logo.
4. Fare clic su Continue Anyway.
5. Fare clic su Finish.
Page 24
5. Fare clic su Next.
Vengono visualizzate altre tre richieste di autorizzazione per
ulteriori plug-in: VocALign, DV Toolkit e DigiTranslator.
6. Fare clic su Authorize in ciascuna finestra di autorizzazione.
Viene richiesto di registrare ciascun plug-in e la chiave iLok.
7. Una volta completata l'autorizzazione, rimuovere la scheda
pretagliata dalla chiave iLok.
8. Fare clic su Finish.
Viene richiesto il codice di autorizzazione di Pro Tools LE.
9. Individuare tale codice nella custodia del DVD di installazione.
10. Immettere il codice e fare clic su Validate.
L'installazione è stata completata.
Page 25
Instrucciones de instalación del software
Las instrucciones siguientes son aplicables al instalador universal de
Avid Xpress Studio HD. Se tarda aproximadamente 45 minutos en
hacer esta instalación. Al llegar a esta etapa, ya deber hacer seguido
las instrucciones que aparecen en el póster Instrucciones para la
configuración del hardware Avid Xpress Studio. El sistema debe estar
encendido y los dispositivos de hardware externos deben estar
apagados.
Necesitará:
• El DVD de instalación de Avid Xpress Studio HD.
• Llave de aplicación de Avid (mochila)
• iLok USB Smart Key
• Tarjeta de licencia DV Toolkit
• Código de autorización de Avid Pro Tools LE (ubicado en la caja
del DVD)
• Número de serie de Sorenson Squeeze (ubicado en la caja del
DVD)
Page 26
1. Para poder ejecutar un editor de Avid, deberá tener instalado
Windows Media 10 en el sistema. Si no ha instalado Windows
Media 10, disponible en el DVD de instalación, abra la carpeta
WindowsMediaInstall y haga clic en el archivo wmfdist.exe.
2. Para instalar QuickTime 6.5, vaya al sitio Web
www.quicktime.com y siga las instrucciones que se
proporcionan.
3. Los dispositivos Avid Mojo y Digi 002 deberían estar apagados o
Mbox deberá estar desenchufado.
El Digi 002 deberá estar conectado pero no encendido.
4. Cierre todas las aplicaciones activas.
5. Introduzca el DVD de instalación de Avid Xpress Studio HD.
Se abre el menú del instalador.
6. (Opcional) Haga clic en Léame/Explorar DVD (ReadMe/Browse
DVD).
7. Haga clic en Instalar productos (Install Products).
Se abrirá la ventana Bienvenido (Welcome).
8. Haga clic en Siguiente (Next).
9. Seleccione su país en la ventana Selección de país del acuerdo de
licencia (Country Selection for License Agreement), y haga clic
en Siguiente (Next).
10. Introduzca la Información de cliente (Customer Information) y
haga clic en Siguiente (Next).
Se abre Elegir ubicación de destino (Choose Destination
Location).
11. Haga clic en Siguiente (Next).
Se abre la ventana Ubicación de datos de aplicación (Application
Data Location).
12. Haga clic en Siguiente (Next).
13. Seleccione las aplicaciones que desee instalar y haga clic en
Siguiente (Next).
Dos opciones no están seleccionadas: Avid Codecs LE y Adobe
After Effects (Vista previa de monitor externo).
Para instalar Avid AfterEffects EMP, deberá tener Adobe After
Effects instalado en el sistema.
Page 27
Se abre la ventana Listo para la instalación del programa (Ready
to Install the program).
14. Haga clic en Instalar (Install).
Se instalan Avid Xpress Pro HD y sus componentes.
Se abre un cuadro de diálogo en el que se declara que el
controlador no ha pasado las pruebas de logotipo de Windows,
pero puede ignorar esta advertencia sin ningún problema.
15. Haga clic en Aceptar.
Este cuadro de diálogo se abre varias veces durante el uso de este
instalador. Haga clic cada vez en Continuar de todos modos
(Continue Anyway).
Se abre un cuadro de diálogo en el que se declara que debe
instalar Windows Media 10 después de esta instalación.
16. Haga clic en Aceptar.
17. Haga clic en Finalizar (Finish)
Cuando se abre la ventana del instalador de Avid Pro Tools LE,
hay varias opciones seleccionadas que puede instalar. Las dos
opciones que no están seleccionadas, Command|8 Controller &
Drivers y MP3 Codec, sólo se deberían instalar si planea tener la
superficie de control de Command|8 conectada al sistema. No se
recomienda que instale esta opción si tiene un dispositivo Digi
002 o Mbox. Para poder instalar MP3 Codec Update, deberá
comprar el códec MP3 a través de Digidesign.
Page 28
4. Haga clic en Aceptar.
El Asistente para nuevo hardware encontrado continúa con la
instalación del hardware de Digidesign.
5. Cuando la instalación haya resultado satisfactoria, haga clic en
Aceptar.
La instalación continúa.
Se abre la ventana de prueba del logotipo de Windows.
6. Haga clic en Continuar de todos modos (Continue Anyway).
Se abre un cuadro de diálogo en el que se declara que el
instalador de controlador no pudo encontrar el hardware de Avid
y le pregunta si desea volver a intentarlo.
7. Haga clic en No.
Finalización de la instalación
Se instalan Avid 3D y sus componentes.
1. Siga las instrucciones en pantalla.
Se instalan Avid FX y sus componentes.
2. Siga las instrucciones en pantalla.
Se instalan Avid DVD by Sonic y sus componentes.
3. Siga las instrucciones en pantalla.
Se instalan Sorenson Squeeze y sus componentes.
4. Se le pedirá que introduzca un número de serie para Sorenson
Squeeze.
5. Localice el número de serie en la caja del DVD, escríbalo y haga
clic en Siguiente (Next).
Se abre un cuadro de diálogo solicitando que instale tiempo de
ejecución de formateo de Windows Media. Si ya ha instalado
Windows Media 10 según el paso 10 de "Instalación de las
aplicaciones de Avid", haga clic en Siguiente (Next) y no haga
caso a este mensaje.
Se le pedirá que registre Sorenson Squeeze.
Page 29
6. Cuando todos los productos se hayan instalado
satisfactoriamente, reinicie el ordenador.
En este momento puede ver el archivo Léame de Avid Xpress
Studio HD.
7. Haga clic en Finalizar (Finish).
Page 30
3. Separe la figura recortable de DV Toolkit de la tarjeta protectora,
tirando de ella hacia arriba y hacia fuera con el dedo pulgar. No
fuerce hacia abajo la figura recortable.
4. Inserte la figura recortable en la iLok. Verifique visualmente que
la porción de metal de la figura recortable haga contacto con el
lector de tarjetas de metal de iLok.
5. Haga clic en Siguiente (Next).
Se le pedirá en tres ocasiones más que autorice que se agreguen
módulos adicionales: VocALign, DV Toolkit y DigiTranslator.
6. En cada ventana de autorización, haga clic en Autorizar
(Authorize).
Se le pedirá que registre cada módulo adicional y el dispositivo
iLok.
7. Después de que se haya completado la autorización, extraiga del
iLok la figura recortable.
8. Haga clic en Finalizar (Finish).
Se le pedirá el código de autorización de Pro Tools LE.
9. Localice el código de autorización en la caja del DVD de
instalación.
10. Escriba el código y haga clic en Validar (Validate).
Se ha completado la instalación.
Page 31