The Argus Precision Control Box CB-30S is a grade control system with a 16x2 LCD display, 300ms control latency, and interfaces for manual or auto bucket control. It operates from 11-35V DC, has IP-64 protection, and connects to the CS-30 receiver which uses a 200mm sensor column to receive laser signals from any direction and provides out of beam indication.
The Argus Precision Control Box CB-30S is a grade control system with a 16x2 LCD display, 300ms control latency, and interfaces for manual or auto bucket control. It operates from 11-35V DC, has IP-64 protection, and connects to the CS-30 receiver which uses a 200mm sensor column to receive laser signals from any direction and provides out of beam indication.
The Argus Precision Control Box CB-30S is a grade control system with a 16x2 LCD display, 300ms control latency, and interfaces for manual or auto bucket control. It operates from 11-35V DC, has IP-64 protection, and connects to the CS-30 receiver which uses a 200mm sensor column to receive laser signals from any direction and provides out of beam indication.
Operating Voltage 11~35 volt DC, Reverse polarity protected
Power Consumption Less then 50 watts User Interface a- Toggle switch for power on/off b- Toggle switch for manual bucket control c- Toggle switch for auto/manual selection d- Touch button for grade control Control Latency 300 milliseconds maximum Display 16x2 character LCD with in built in backlight Receiver Interface 4 wires Serial RS-232 interface / 6 wire parallel Connectors Military grade connectors Operating Humidity Range 0~90 RH% Operating Temperature Range -5 ~70 degree Celsius Grade Narrow, Medium and Wide Protection Class IP-64
Receiver CS-30
Sensor Column (vertical) 200 mm
Beam Reception 360 degrees Transmitter Compatibility 600/900/1100 RPM Operating Humidity Range 0~90 RH% Operating Temperature Range -5 ~70 degree Celsius Indicator LED indicators for laser position Power Source Powered by control box Out of beam indication Up and down Protection Class IP-64