Series HP 61-151 4 a
6000 PSI 7 CALINE
le
S| OUT i IN
— 314
u 2
; 4
Dimensions:
Tye. Hest _aP oT
Connection =SSAE_[ “12 SAE,
a at 70,58
z 708 ‘64
c 7083 [13.19
Weight approx | B.a0 bs | S80 bs_| 72.10 ws
‘Volume tank | "0.08 gat | -0.10.ga1 | 0.76 ga
41) Connect the stand grounding tab to suitable
‘arth ground poin
Dimensions: inches
Designs and performance values are subject to change,Pressure Filter
Series HP 61-151
6000 PSI
Description:
Pressure fiter series HP 61-181 have a working
prossuro up to 8000 PSI, Pressure poaks can be
lbsorbed wih 2 sufcient safety margin. The HP-‘ter
SS imine mounted,
‘The fer element consists of star-shaped, pleated fter
material, which is supported on the ‘inside by a
Dorforated core tubo and Is bonded to the and caps
witha high-quality adhesive. The flow direction is fom
‘outside to iside, Filler eloments are available down to
um,
Eaton fiter elements are known for high intrinsic
sabilly and an excelent fivation eapabilly, @ high
ir-retaning capacity and along service Ife.
Eaton fiter elements are sulable for ll petroleum
based fds, HW/-emulsions, most synthetic hydraule
fide and lbreaton al.
Eaton fiter elements are available up to a pressure
resistance of ap 2820 PSI and a rupture strength ofp
2425 P51,
‘The intamal vale is intogratod into te fiter oad.
Alter reaching the bypass pressure sotng, the bypass
valve will send unfltered parial fw around the fer.
‘The reversing valve provides another level of
protection forthe filer element. The reverse low wil
note fired
1. Type index:
1.1, Complete filter: (ociering exemple)
HP. 91.10VG.HR. E. P. -. UG. 4.
sizts Leste
AJ series:
HP = pressure er
_2_| nominal size: 61,91, 151
3 | fiter-material and fiter fineness:
806, 406, 256, 106 staintss stol wire mash
25VG, 16VG, TOVG, BVG, 3VG microalass
4 | iter element collapse rating:
30 = ap4a5 Pst
HR = 4p 2820 PSI (upture strength ap 3625 PSI)
_5_ | iter element design:
E = single-end open
5_| seating materia:
P= Nitrile (NBR)
v= Viton FM)
1 iter element specification: (500 cat
= = standars
VA = stanless steel
1808 = for HFC applications, see
sheetno, 31601
8. | process connection
UG = thread connection
9_| process connection size:
3 = BSAE
4 s2SAE
5 1B SAE
10 |fiter housing specification: (see catalog)
Standard
for HEC applications, seo
sheet 0.31605
Internal valve:
== without
St = with bypass vate ap 51 PSL
S2__ = with bypass valve ap 102 PSI
R= reversing vabe, = 18.50 GPM
12 | clogging indicator or clogging sensor:
= = without
ROR = Visual, see shost-no. 1606
‘AOC = visual, see sheetno, 1605
AE = visualelectic, see shest-no. 1615,
VSS. = electronic, oe shectna, 1619
‘To ade an indicator to your fie, use the corresponding indicator data
sheet to find te indicator details and add them tothe fiter assembly
‘model cod,
1.2, Filter element: (ordering example)
O1E. 90. 10VG.HR.E. P. -
a [2h ss sls
A | series:
OE, = fiter element according to company standard
_2_| nominal size: 60, 99, 150
“3 | + _1_|s0¢ type index-complet terTechnical data:
esign temperature 16Ft01212°F
‘operating tomperature: 16 FtoH76°F
‘perating medium ‘mineral ol other media on request
‘max. operating pressure: ‘000 Pst
test pressure 8580 PSI
process connection thea connection
housing materia stool
Sealing materia Nitile (NBR) or Viton (FPM), other materials on request
instalation positon: verical
Classified under the Pressure Equipment Dcectve 2014/68iEC for mineral al (ud group 2), Article 4, Para, 3
Classified under ATEX Directive 2014/34/EC according to specie application (see questionnaire sheet-no.24279-4)
Pressure drop flow curves:
fer calculation/sizing
‘The pressure drop of the assembly ata givan flow rate Qs the eum ofthe housing Ap and the
lomant Ap and is calculated as flows
A assy = AB rang * AD act
‘Aproung = (868 49=" (Q)- characteristics)
APoenen (PS) = Q (GPM) x 4S (A) x v(sus) x 2 (4)
For ease of calculation ou Filer Selection tool i¢ available online at wor. atongowersource conealelatrsivation!
Material gradient coefficients (MSK) for filter elements
The materia gradiont coefficients in PSUGPM apply to mineral ol (HLP) wih a density of 0.876 kold* and akinemate viscosity of
139 SUS (20 mmis) The pressure drop changes proportional tthe change in kinematic viscosty and density
ws | 2a | ser | sore | oes | ons | corm | overs | cove
Ap = f(Q) ~ characteristics according to ISO 3968
‘The pressure drop characteristics apply to mineral il (LP) with a density of 0,876 kala’. The pressure érop changes proportionally
tothe dens.
HP{61 Housing Pressure Drop HP.31 Housing Pressure Drop
HP.151 Housing Pressure DropSymbols:
- nh
L a J. =
| 4
. [1 |
| Y eT}
Lt ml
‘Spare parts:
at Se hat STE
Test methods:
E-TN
Powering Boies Wo
Filtar elements are tested according tothe following ISO standards:
(0.2842 Veriation o fabrication
Verifcation of collapse/ourst
stance
integey
180 2043 Verifetion of materal compatiality with fads
180.3723 Method for ond lad test
180.372 Verifeaton of flow fatigue characterises
(0.3968 Evallation of pressure drop versus ow characterises
180 16869 Multspass method for evaluating filtration perfomance
eee om
eras
For more information, please
‘ema us at fitration@eaton.com
(or visit wow. 2aton.comtfitration