Professional Documents
Culture Documents
FOREWORD
This Manual is divided into four Volumes which are further subdivided into Chapters and Parts. Each volume contains a
general subject index covering data found in all volumes. Each Chapter and Part are prefaced by a Table of Contents.
Because of numbering of Chapters to coincide in most cases with AREMA technical committees, there are no Chapters 3, 19,
20, 21, 22, 23, 24, 25, 26, 29, 31 and 32. Committee 24 does not maintain a Manual Chapter.
VOLUME 1 – TRACK
Introduction
Foreword
Table of Contents 1
Chapter 4 Rail
Part 1 Design of Rail
Part 2 Manufacture of Rail
Part 3 Joining of Rail
Part 4 Maintenance of Rail
Part 5 Miscellaneous
Part 6 Commentaries
Chapter 5 Track
Part 1 Tie Plates
Part 2 Track Spikes
Part 3 Curves
Part 4 Track Construction
Chapter 30 Ties
Part 1 General Considerations
Part 2 Evaluative Tests for Tie Systems
Part 3 Solid Sawn Timber Ties
Part 4 Concrete Ties
Part 5 Engineered Composite Ties
Part 6 Steel Ties
VOLUME 2 – STRUCTURES
Chapter 7 Timber Structures
Part 1 Material Specifications for Lumber, Timber, Engineered Wood Products, Timber Piles, Fasteners,
Timber Bridge Ties and Recommendations for Fire-Retardant Coating for Creosoted Wood
Part 2 Design of Wood Railway Bridges and Trestles for Railway Loading
Part 3 Rating Existing Wood Bridges and Trestles
Part 4 Construction and Maintenance of Timber Structures
Part 5 Inspection of Timber Structures
Part 6 Commentary
Commuter, Transit and High Speed Rail - Unified Table of Contents and Common Elements of Planning, Design and 1
Operations Analyses for Passenger Rail Systems
Chapter 13 Environmental
Part 1 Introduction
Part 2 Environmental Review Considerations 3
Part 3 Water and Wastewater Compliance
Part 4 Air Quality Compliance
Part 5 Waste Management
Chapter 16 Economics of Railway Engineering and Operations
Part 1 Railway Location
Part 2 Train Performance 4
Part 3 Power
Part 4 Railway Operation
Part 5 Economics and Location of Defect Detector Systems
Part 6 Railway Applications of Industrial & Systems Engineering
Part 7 Public Improvements and Public Private Partnerships – Their Costs and Benefits
Part 8 Organization
Part 9 Program Work
Part 10 Construction and Maintenance Operations
Part 11 Equated Mileage Parameters
Part 12 Accounting
Part 14 Taxes
Part 15 Planning, Budgeting and Control
Chapter 28 Clearances
Part 1 Clearance Diagrams – Fixed Obstructions
Part 2 Equipment Diagrams