Professional Documents
Culture Documents
Quotation of Whole Electric Galvanizing Line-Huarui Angela
Quotation of Whole Electric Galvanizing Line-Huarui Angela
Quotation List
There are total 3 plating tanks for this equipment,each drum one time can load about 100kg steel
bar with size 2-3m, about 15-20 minutes can finish one plating tank. Each drum alternatively
galvanized.
The formulation for galvanizing is: put the steel barand use hoist to put the barrel to Galvanized
liquid for galvanization , after galvanization, use the hoist to put the barrel to passivating liquid
for passivation, and then use a hoist to put the barrel to water to wash the goods.
6. The anchors of the support frame are fixed with 15mm expansion screws.
7. Special slide rails, trolleys, positioning pieces and installation rails for driving cables.
8. The slide rail support frame adopts 50 × 50 × 3mm square tube.
9. All fixing screws are 304 # stainless steel screws;
10. Apply anti-rust paint (dark gray) after welding and polishing. Spray sky blue lacquer all over.
4. Quantity: 10 sets
8. Supporting equipment
1. Electroplating power supply (alkaline tank) 12V 1500A, 2sets
3. Power connection copper bar 8 * 80mm and 6 * 60mm, 2sets of power supply 2sets
4.Remote control device to control the driving move lateral (back and forth), 1set
Remarks: