Professional Documents
Culture Documents
FL852023
FL852023
Dismantling
1. Remove the lugs from the shift fork.
Figure 1
2. Remove the attaching bracket, spacers, pin and split pin.
Figure 2
1. 1 Spacer
2 Split pin
3 Pin
4 Attaching bracket
http://localhost:5011/prosis/40/COB/GB/COB/13086_FL852023.XML 5/9/2010
Page 2 of 4
Figure 3
4. Change the circlips and pivot bearing as necessary.
Figure 4
Assembling
5. Fit the bolt, pushrod, washer and nut. Apply thread-locking adhesive (strong).
http://localhost:5011/prosis/40/COB/GB/COB/13086_FL852023.XML 5/9/2010
Page 3 of 4
Figure 5
6. Tighten the bolt.
Tightening torque: 10 Nm
Figure 6
7. Fit the attaching bracket, spacers, pin and split pin.
Figure 7
http://localhost:5011/prosis/40/COB/GB/COB/13086_FL852023.XML 5/9/2010
Page 4 of 4
1. 1 Shift fork
2 Pin
3 Bracket
4 Split pin
Figure 8
http://localhost:5011/prosis/40/COB/GB/COB/13086_FL852023.XML 5/9/2010