Professional Documents
Culture Documents
VL2022230500969 Da
VL2022230500969 Da
1) Consider the following binary sequence {0, 1, 1, 0, 0, 0, 1}. Explain the operation of
MSK for the above mentioned sequence using Phase Trellis diagram by assuming θ(0)
=0 radians and θ(0)=π radians.
2) Draw the block schematic and construct the PN sequence for the Feedback Taps [5, 2].
Verify Balance, Run and autocorrelation property. . The initial state of the registrar is
10001.
3) Draw the block schematic and construct the PN sequence for the Feedback Taps [4,3].
Assume that the initial state of the F/F’s are 1011. This PN sequence is used in slow
FH/MFSK system.
The FH/MFSK signal has the following parameters:
c) Illustrate the variation of the frequency of FH/MFSK signal for one complete period
of the PN sequence. Assume that the carrier hops to a new frequency after
transmitting two MFSK symbols or four information bits. Assume binary data
sequence to be 1,0,0,0,1,1,0,1.
4) Draw the block diagram of a matched filter and derive an expression for impulse
response of the same.