Professional Documents
Culture Documents
SKF KDN.K34020XP0 Specification
SKF KDN.K34020XP0 Specification
K34020XP0
Reali-Slim thin section four-point contact ball bearing
Four-point contact ball bearings can accommodate radial, axial and moment
loads simultaneously. One bearing series is based on a single cross section which
remains constant as the bore diameter increases, leading to significant space and
weight savings. The bearings are available with metric or inch main dimensions.
Depending on the design and series the bearings can be provided with chemical
and corrosion resistance.
• Accommodate radial, axial and moment loads simultaneously
• Require considerably less axial space than two angular contact ball bearings
• Thin cross section
• Lightweight
• Low friction
• High stiffness
• High running accuracy
Overview
Dimensions
Width 20 mm
Contact angle 30 °
Properties
Number of rows 1
Matched No
arrangement
Coating Without
Sealing Without
Lubricant None
Dimensions
B 20 mm Width
d1 ≈ 355 mm Shoulder diameter inner ring
D1 ≈ 365 mm Shoulder diameter outer ring
Calculation data
Mass
Copyright
Copyright in this website / app copyright of the information and software made available on this website / app rest with
SKF or its licensors. All rights are reserved. All licensed material will reference the licensor that has granted SKF the right
to use the material. The information and software made available on this website / app may not be reproduced,
duplicated, copied, transferred, distributed, stored, modified, downloaded or otherwise exploited for any commercial use
without the prior written approval of SKF. However, it may be reproduced, stored and downloaded for use by individuals
without prior written approval of SKF. Under no circumstances may this information or software be supplied to third
parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Changes
SKF reserves the right to make changes or additions to this website / app at any time.