In Cab Checks Mirrors & Windows Access • Check driving controls, seat position & safety belt • Mirrors secure & aligned correctly • Steps undamaged • General housekeeping & cleanliness of cab • Clean & in good condition • Good unworn surface • Remove any obstructions or loose material • View not obstructed e.g. by stickers, etc. • Clean especially in the foot well • Doors working properly • Valid Insurance & Tax discs displayed • Turn on engine & check all instrument gauges & warning lights working • Tachograph: Calibrated, correct hours & speed limiter plaque displayed (where applicable) • Wipers, washers, horn, demister & temperature controls working correctly • Steering & brakes working correctly Lights, Indicators & • Ensure safety belts accessible & working Reflectors • Hi-Viz jacket/vest accessible in cab • All in place • Undamaged • Working External Checks • Clean • Vehicle sitting square & not leaning • Correct colour to one side • Check underneath front of vehicle for fluid leaks • Bumpers (Front & Rear) in good condition Load Security • Exhaust: No excessive noise or smoke Wheels & Tyres • Vehicle loaded within load limits • Number plates (Front & Rear): • Tyres correctly inflated In place, visible & clean • Load distributed evenly across axles • Bulkhead in position • Tyres correct tread depth • Fuel cap seal: In place, in good condition & no leaks • Load secured properly (restraining equipment, straps, racking) • Tyres undamaged: No abrasions, bulges or tears • Check engine oil, coolant, windscreen • Restraint equipment inspected: no damage, no loose • Road wheel nuts all in place, correctly fitted & secure wash and brake fluid for levels & leaks racking bolts, etc. • Wheel nut indicators (if in use) correctly aligned