Professional Documents
Culture Documents
BMW Z4 - TIS - Front Bumper
BMW Z4 - TIS - Front Bumper
Installation:
Bumper trim is secured through opening (3) on left/right.
RA Removing and installing front bumper trim BMW AG - TIS 09.05.2022 18:50
Issue status (07/2006) Valid only until next DVD is issued Copyright Page - 1 -
Unclip bumper trim (1) in area (2) on left/right in direction of
arrow with special tool 00 9 317 .
Version with headlight washer system:
Have a rubber plug on hand.
Pull bumper trim (1) forwards slightly, disconnect right hose
from T-distributor and seal with rubber plug.
Installation:
If necessary, top up washer fluid.
Version with fog lamps:
Pull bumper trim (1) forwards slightly and disconnect plug
connections on fog lamp on left/right.
RA Removing and installing front bumper trim BMW AG - TIS 09.05.2022 18:50
Issue status (07/2006) Valid only until next DVD is issued Copyright Page - 2 -