Professional Documents
Culture Documents
Product Description: Ea880-207 Outdoor CPE
Product Description: Ea880-207 Outdoor CPE
Product Description
Contents
The eA880-207 supports wired and wireless network access, and provides the following
functions.
- data service
- Wi-Fi service
- security service
- maintenance management function
- data routing service
1.3 Appearance
CPE eA880-207 appearance as shown in Figure 1-1.
LED
# color Light state description
name
Indicates the power-on state of the device.
1 PWR green Constant bright: The device is powered on.
Constant off: The device is powered off.
Indicates the working status of the GE0 network port.
Constant bright: the port is connected
2 GE0 green
Constant off: the port is not connected
Blinking: The port has data to send and receive.
Indicates the working status of the GE1 network port.
Constant bright: the port is connected
3 GE1 green
Constant off: the port is not connected
Blinking: The port has data to send and receive.
Indicates GNSS (satellite positioning
function) working status
4 GNSS green Constant bright: GNSS enabled
Constant off: GNSS is not enabled
Blinking: GNSS satellite positioning is normal
Indicates WiFi working status
Constant bright: WiFi enabled
5 WiFi green
Constant off: WiFi is not enabled
Blinking: WiFi has user connection
Indicates LTE working status
Constant bright: LTE enabled
6 LTE green
Constant off: LTE disabled
Blinking: LTE network access is normal
Indicate SIM status
Green constant bright: SIM card is normal, hard SIM card
mode
Green /
7 SIM Red constant bright: SIM card is abnormal, hard SIM card
red
mode
Blinking green: SIM card is normal, soft SIM card mode
Blinking red: SIM card is abnormal, soft SIM card mode
Indicates the WAN connection status
Green /
8 WAN Green constant bright: The WAN port is connected.
red
Red constant bright: WAN port is not connected
Indicates LTE signal strength: very
weak / weak / general / strong
CPE eA880-207 is designed to provide wireless broadband data access services to vehicle,
applicable to all industries telematics scenario requirements.
The eA880-207 supports LTE wireless routing, which provides wireless communication
services to data centers for in-vehicle devices and supports Layer 2 and Layer 3 tunnel
networking.
Note:
The actual maximum EIRP transmit power varies
according to different national and regional regulations.
WLAN 802.11gn , 20dBm, +/-2dBm
802.11ac, 17dBm, +/-2dBm
Note:
It is recommended to deploy within 3 months of the arrival of the equipment, or store it in the
following environment:
- Temperature: -10 °C to 35 °C
Figure 1-6
project Features
Packet data routing and forwarding
LTE wireless data transmission
Broadcast message transparent transmission
Basic
Multicast packet transparent transmission
Quality of Service ( QoS )
WIFI wireless access
Virtual local area network ( VLAN )
IP address management ( DHCP )
Port mapping ( NAT)
Network
Support for Routing Behind MS
NTP function
Virtual private network VxLAN, GRE
WEB maintenance management
TR069 remote management
Support configuration import and export
O&M Remote upgrade estimated version
Remote status query
Alarm reporting
Log management
MAC address filtering
IP address filtering
Safety
URL filtering
Service access control
1.3 Antenna
Figure 1-7 Antenna
Name Quantity
Outdoor Omni-Antenna 2
Specifications of Antenna
Frequency 700~800MHz
VSWR ≤2.0
Gain 3.5 dBi
Half-power beam width (°) +/-12°
Polarization Vertical
Impedance (Ω) 50Ω
Connector N-female
IP Level IP 67
1.4 Installation Material and Support