The document contains results from 27 experimental runs where cutting velocity, feed rate, depth of cut were varied to study their effect on material removal rate, machining time and force. It provides the processing parameters, output responses for each run including material removal rate ranging from 208.66 mm3/min to 613.55 mm3/min and machining time ranging from 0.83 to 1.25 minutes. The document studies the effect of varying input parameters on output responses.
The document contains results from 27 experimental runs where cutting velocity, feed rate, depth of cut were varied to study their effect on material removal rate, machining time and force. It provides the processing parameters, output responses for each run including material removal rate ranging from 208.66 mm3/min to 613.55 mm3/min and machining time ranging from 0.83 to 1.25 minutes. The document studies the effect of varying input parameters on output responses.
The document contains results from 27 experimental runs where cutting velocity, feed rate, depth of cut were varied to study their effect on material removal rate, machining time and force. It provides the processing parameters, output responses for each run including material removal rate ranging from 208.66 mm3/min to 613.55 mm3/min and machining time ranging from 0.83 to 1.25 minutes. The document studies the effect of varying input parameters on output responses.