Professional Documents
Culture Documents
Especificaciones Cilindro de Inclinacion
Especificaciones Cilindro de Inclinacion
Page 1 of 3
Cerrar SIS
Pantalla anterior
Especificaciones
259D3, 279D3, 289D3, 299D3 and 299D3 XE Compact Track Loaders, 257D3 Multi
Terrain Loaders and 236D3, 242D3, 246D3, 262D3, 272D3 and 272D3 XE Skid Steer
Loaders
Número de medio -M0105419-02 Fecha de publicación -01/10/2020 Fecha de actualización -08/10/2020
i07755290
Tilt Cylinder
SMCS - 5104
S/N - AZ61-UP
S/N - CW91-UP
S/N - F9C1-UP
S/N - FMA1-UP
S/N - GK61-UP
S/N - HSX1-UP
S/N - KEZ1-UP
S/N - KXL1-UP
S/N - LM71-UP
S/N - MC91-UP
S/N - ME61-UP
S/N - NXL1-UP
S/N - R2L1-UP
S/N - S7E1-UP
S/N - TE91-UP
S/N - TLS1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 11-05-2022
236D3 Skid Steer Loader AZ600001-UP (MACHINE) POWERED BY C3.3B Engine... Page 2 of 3
Illustration 1 g06422031
Typical example
Table 1
Item Qty Part Specification Description
All bores must be free of paint and lubricate all pin.
Before tightening, clean the threads.
Lubricate the sealing lip slightly with the lubricant being
1 1 162-0177 Plug As
sealed.
Torque to 25 N·m (221 lb in).
2 - - Before assembly, apply Loctite 609 to the wiper seals.
140-2392 Lip Type Lubricate the sealing lip slightly with the lubricant being
3 1
Seal sealed.
4 1 - Before assembly, apply Loctite648 to Wearband groove.
Lubricate the sealing lip slightly with the lubricant being
5 1 299-1379 U-Cup Seal
sealed.
D1 1 Cylinder Bore is 70.04 ± 0.04 mm (2.757 ± 0.002 inch).
D2 1 Rod Diameter is 34.95 mm (1.376 inch).
9X-6611 Socket Before assembly, apply Loctite243 to threads.
6 1
Setscrew Torque to 25 ± 5 N·m (221 ± 44 lb in).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 11-05-2022
236D3 Skid Steer Loader AZ600001-UP (MACHINE) POWERED BY C3.3B Engine... Page 3 of 3
Copyright 1993 - 2022 Caterpillar Inc. Wed May 11 19:48:49 UTC-0400 2022
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 11-05-2022