You are on page 1of 2

(Page 1 of 2)

USN: 1 D A 18EC651
Sixth Semester B. E. Degree (Autonomous) Semester End Examination (SEE), 2023

Automotive Electronics Engineering


(Model Paper 1)
Maximum Time: 3 Hours Maximum Marks: 100

Instructions to students:
1. Answer FIVE FULL Questions.
2. Assume missing data
Q. No. Questions Marks CO RBT
Cognitive
Level

1. a) With neat diagram explain the four strokes for a 4-stroke/cycle SI 10 CO1 L2
engine.
b) Explain Spark Plug configuration, spark pulse generation and 10 CO1 L2
Ignition Timing with relevant diagrams.

OR
2. a) Explain the working of a disc brake system with a neat diagram. 10 CO1 L2

b) Explain the working of an electronic ignition control with a neat 10 CO1 L2


diagram

3. a) Explain Collision Avoidance Radar warning system with relevant 10 CO2 L2


diagrams. 393

b) Explain radio and inertial navigation system with a neat diagram. 10 CO2 L2
406,405
OR
4. a) Explain Dead lock reckoning navigation system. 409 10 CO2 L2

b) Explain low tire-pressure warning system with relevant diagrams. 06 CO2 L2


396

5. a) Explain the working of an EGO sensor with a neat diagram. Also 10 CO3 L2
draw the ideal EGO switching characteristics and explain.
b) With relevant diagram explain the optical crankshaft position 10 CO3 L2
sensor.
OR
6. a) What is hall effect? Explain a position sensor using principle of 12 CO3 L2
hall effect. Compare it with magnetic reluctance position sensor

b) With a neat sketch explain Throttle Angle Sensor (TAS) 08 CO3 L2

Dr. Ambedkar Institute of Technology, Bangalore – 560056


(An Autonomous Institution Affiliated to Visvesvaraya Technological University, Belgaum)
(Page 2 of 2)

7. a) Explain Antilock Braking System with relevant diagrams. 08 CO4 L2

b) With a neat block diagram explain the typical automotive cruise 12 CO4 L3
control system and Cruise Control Speed Performance with
relevant speed response.
OR
8. a) Explain Digital Cruise control system with the help of a relevant 12 CO4 L2
diagram.

b) Describe the concepts of an electronic suspension control 08 CO4 L3


system.
9. a) Explain the effect of Air/fuel ratio on the performance. 08 CO5 L2
b) What are the major controller inputs and outputs from/to Engine? 12 CO5 L2
Show their connection between Engine and Controller.
OR
10. a) Define the Engine performance terms Power, BSFC, Torque and 10 CO5 L2
Volumetric Efficiency with relevant formulae and their units.

b) Describe the concept of an electronic engine control system 10 CO5 L3


with suitable diagrams.

Dr. Ambedkar Institute of Technology, Bangalore – 560056


(An Autonomous Institution Affiliated to Visvesvaraya Technological University, Belgaum)

You might also like