The system is used for wirelessly controlling any electrical device (START/STOP Functions). Depending on signal propagation conditions, it can have a range of up to 3km (on direct visual contact). The commands are coded and decoded by microprocessors on the transmitter (PT600) as well as the receiver (PT601), to ensure total security. The PT600 is suitable for remote control of pumps in individual or collective irrigation systems in rural areas.
Ideal in cases where the pump house is situated at a
distance of about 3km from the user
set contents technical characteristics
transmitter PT600 / 2 operation frequency V.H.F.
receiver PT601 transmitter power 100 mW receiver power supply PT611-A1 modulation type F.S.K. antenna PDIP frequency deviation ±2,5 KHz cable RG58 (7m) receiver sensitivity 0,3µV (12db sinad) connection socket PST11 x2 transmitter power supply 9V Alkaline battery instruction manual in English receiver power supply 230V AC / 50Hz transmitter antenna Retractable receiver antenna Dipole, λ/2 connection socket Bulb type, 11p output relay START: N.O. / STOP: N.C., 10A / 250V AC cat. AC1