Professional Documents
Culture Documents
SABIC® COHERE™ - 8185 - Global - Technical - Data - Sheet
SABIC® COHERE™ - 8185 - Global - Technical - Data - Sheet
DESCRIPTION
® ™
SABIC COHERE 8185 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in high
performance film applications with outstanding gel control, and an excellent combination of toughness, hot tack, sealing and optical properties.
TYPICAL APPLICATIONS
• Sealant layer in multi-layer film;
• Cling layer in stretch wrap film;
• Adhesive layer in surface protect film.
POLYMER PROPERTIES
Melt Flow Rate
at 190°C and 2.16 kg 1.0 g/10 min ASTM D1238
Density
at 23°C 0.885 g/cm³ ASTM D792
MECHANICAL PROPERTIES
Flexural Modulus (1% Secant) 29.4 MPa ASTM D790 A
FILM PROPERTIES
(1)
Tensile Properties
stress at break 16.7 MPa ASTM D638
THERMAL PROPERTIES
Melting Point ~74 °C SABIC method
(1)
All physical properties were measured from specimens cut from compression molded. These typical values depend on manufacturing conditions. Therefore, customers should confirm the
product performance by using their own tests.
FOOD REGULATION
Please contact the local Sales / Technical representative for details.
DISCLAIMER
This grade is not intended for and must not be used in any pharmaceutical / medical applications.
DISCLAIMER
(1)
All physical properties were measured from specimens cut from compression molded. These typical values depend on manufacturing conditions. Therefore, customers should confirm the
product performance by using their own tests.
FOOD REGULATION
Please contact the local Sales / Technical representative for details.
DISCLAIMER
This grade is not intended for and must not be used in any pharmaceutical / medical applications.
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.