COOLING SYSTEM - Thermostat
INSPECTION OF THERMOSTAT
INSPECT THERMOSTAT
HINT: The thermostat is num
opening temperature.
{a) Immerse the thermostat in
heat the water.
(b) Check the valve opening tem
Valve opening temperature:
80 ~ 84°C (176 - 183°F)
If the valve opening temperature =
replace the thermostat.
(c) Check the valve lift.
Valve lift:
8 mm (0.31 in.) or more at 95°C
If the vaive lift is less than speci
thermostat.
(d) - Check that the valve spring is
mostat is fully closed.
If necessary, replace the thermostat.
INSTALLATION OF THERMOST:
1, PLACE THERMOSTAT IN WATER,
(a) Install a new gasket to the the
(b) (Type A)
Set the jiggle valve of the ther
tion, and insert the thermostat im
housing
HINT: The jiggle vaive may be set
side of the prescribed position.
mn (b) (Type B)
Te Align the jiggle valve of the th
Jigale, valve — upper side of the stud bolt, and inser
wt
—— in the water pump.
HINT: The jiggle valve may be set wi
side of the prescribed position.