Professional Documents
Culture Documents
Update Manual en
Update Manual en
The file contains software PhoenixCard allowing to prepare the SD card containing the firmware
designed for notebook OAN133. PhoenixCard program is designed for use with a PC computer.
Installation Instructions.
2. Under “Card and Image” section select the drive containing the SD card, and then use the
“Img File” button the select image that you want to put on the SD card. In our case, the file is
Espanol_Omegal_ROM_US_KBD_v2.2.img.
3. In the ”Write Mode” section mark the check box “Product”
4. Select the Burn option - start the process of preparing the SD card
5. After completion of preparing card, place it in card reader of OAN133, when the device is
turned off.
6. Turn on the device, the process of installing the new firmware should start automatically and
is indicated by the red box in the upper left corner of the screen and a distinctive sound
7. After installation, remove the card and power on the device.