PHCENDS
MARRISBURG/WOOLLEY
Main Characteristics
+ Withstands high working pressures
+ Allows for axial and lateral deflection
+ Compensates for expansion and contraction
due to temperature variations
+ Does not require gaskets between flanges
+ Eliminates the need for perfect alignment of
pipe
+ Eliminates the use of retaining ring
+ Resistant to erosion
+ Can be easily installed
EXPANSION
JOINTS
Bod}
Body is nitrile rubber with polyamide textile
insertions.
Flanges:
Flanges are full faced and make an integral part of
the joint. They are drilled to conform to the bolt
holes of the pipeline. "
Installation:
‘The flanges rotate easily on the bellows, making
bolt alignment easy during installation.
COMPRESSION ELONGATION
‘TRANSVERSE ANGULAR:
DEFLECTION » DEFLECTIONEXPANSION (
JOINTS
rd —e
S| AS
T | Poa
|
. | al
jefe) is i
@
Ei
Boe
T
No. bmn. | anc.
HOLES ext_| periec. | psic | vac.
rate 75 | 26
4 225 | 2
+t [205 [26°
a 225 |
~8 750 22526
8 750 22826
8 750 725 | as
“2 | tm [1.000 226 [a8
12] 4.000 225 [os
Notes:
1. All piping must be anchored and guided
2. Body is rte rubber with polyamide (aylon) textile insertions
MAXINUMS:
Working Pressure: 280 PSI up to 10 Inch
170 PSI ever 10 Inch
Wotking Temp. 50°10 +220°F
‘Aromatic Content: 30% to 40%
Working Vacuum: 26° Hg
4 ARRISBURG/WOOLLEY PO.00K-2168 HOUSTON, TX 7252- SP. 1001887,