1. Do not expose this unit under high American Audio® product. Please read temperature or humid area. the following instructions before installing 2. AC adapters rated with DC 5V, or using your new unit. 500mA is recommended. 3. No user servicable parts. Please Operating Instructions: contact your nearest authorized dealer for 1. Plug in proper AC adapter service. 2. Connect music signal to Left and Right input jacks, must be pre-amp level. 3. Turn the power switch on. 4. Adjust L and R audio controls to desired Model: dB-Display MK II responce 5. This unit has BAR and DOT display modes. BAR mode: Set switch to BAR position, LEDs SPECIFICATIONS: will glow from -57dB to 0dB according to signal strength. Power input : DC 5V 500mA DOT mode: Set Mode switch to DOT position, Audio input: 100mV-3Vp-p only two LEDs glow and Power consumption: <10W chase from left to right according to audio level variety. Dimensions: 2 3/8” L x 19” W x 1 3/4” H Weight: 2.58 lbs / 1.25 Kg.