Professional Documents
Culture Documents
Important References
Important References
[2] N. Guo, M.C. Leu, Additive manufacturing: Technology, applications and research needs, Frontiers of
Mechanical Engineering. 8 (2013) 215–243. https://doi.org/10.1007/s11465-013-0248-8.
[3] J.I. Lipton, M. Cutler, F. Nigl, D. Cohen, H. Lipson, Additive manufacturing for the food industry,
Trends in Food Science and Technology. 43 (2015) 114–123.
https://doi.org/10.1016/j.tifs.2015.02.004.
[5] S. Kumar, R. Singh, T.P. Singh, A. Batish, Fused filament fabrication: A comprehensive review, Journal
of Thermoplastic Composite Materials. (2020). https://doi.org/10.1177/0892705720970629.
[6] J. Wang, H. Xie, Z. Weng, T. Senthil, L. Wu, A novel approach to improve mechanical properties of
parts fabricated by fused deposition modeling, Materials and Design. 105 (2016) 152–159.
https://doi.org/10.1016/J.MATDES.2016.05.078.
[7] I.J. Solomon, P. Sevvel, J. Gunasekaran, A review on the various processing parameters in FDM, in:
Materials Today: Proceedings, Elsevier Ltd, 2020: pp. 509–514.
https://doi.org/10.1016/j.matpr.2020.05.484.
[9] D.D. Gu, W. Meiners, K. Wissenbach, R. Poprawe, Laser additive manufacturing of metallic
components: Materials, processes and mechanisms, International Materials Reviews. 57 (2012) 133–
164. https://doi.org/10.1179/1743280411Y.0000000014.
[10] M. Hofmann, 3D printing gets a boost and opportunities with polymer materials, ACS Macro Letters.
3 (2014) 382–386. https://doi.org/10.1021/mz4006556.
[11] J. Wang, H. Xie, Z. Weng, T. Senthil, L. Wu, A novel approach to improve mechanical properties of
parts fabricated by fused deposition modeling, Materials and Design. 105 (2016) 152–159.
https://doi.org/10.1016/j.matdes.2016.05.078.
[12] L.J. Love, V. Kunc, O. Rios, C.E. Duty, A.M. Elliott, B.K. Post, R.J. Smith, C.A. Blue, The importance of
carbon fiber to polymer additive manufacturing, Journal of Materials Research. 29 (2014) 1893–
1898. https://doi.org/10.1557/jmr.2014.212.
[13] M. Palo, J. Holländer, J. Suominen, J. Yliruusi, N. Sandler, 3D printed drug delivery devices:
perspectives and technical challenges, Expert Review of Medical Devices. 14 (2017) 685–696.
https://doi.org/10.1080/17434440.2017.1363647.
[14] M. Lay, N.L.N. Thajudin, Z.A.A. Hamid, A. Rusli, M.K. Abdullah, R.K. Shuib, Comparison of physical and
mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and
injection molding, Composites Part B: Engineering. 176 (2019) 107341.
https://doi.org/10.1016/j.compositesb.2019.107341.
[15] L.W. McKeen, Polyamides (Nylons), in: The Effect of Creep and Other Time Related Factors on
Plastics and Elastomers, Elsevier, 2009: pp. 197–262. https://doi.org/10.1016/b978-0-8155-1585-
2.50008-x.
[16] Valter. Carvelli, Stepan. Lomov, Atul. Jain, Fatigue of Textile and Short Fiber Reinforced Composites.,
John Wiley & Sons, Incorporated, 2017.
[18] X. Zhang, W. Fan, T. Liu, Fused deposition modeling 3D printing of polyamide-based composites and
its applications, Composites Communications. 21 (2020).
https://doi.org/10.1016/j.coco.2020.100413.
[19] T. Hofstätter, D.B. Pedersen, G. Tosello, H.N. Hansen, State-of-the-art of fiber-reinforced polymers in
additive manufacturing technologies, Journal of Reinforced Plastics and Composites. 36 (2017)
1061–1073. https://doi.org/10.1177/0731684417695648.
[20] G. Liao, Z. Li, Y. Cheng, D. Xu, D. Zhu, S. Jiang, J. Guo, X. Chen, G. Xu, Y. Zhu, Properties of oriented
carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling, Materials and
Design. 139 (2018) 283–292. https://doi.org/10.1016/j.matdes.2017.11.027.
[21] J. Tang, B. Xu, Z. Xi, X. Pan, L. Zhao, Controllable Crystallization Behavior of Nylon-6/66 Copolymers
Based on Regulating Sequence Distribution, Industrial and Engineering Chemistry Research. 57
(2018) 15008–15019. https://doi.org/10.1021/acs.iecr.8b02671.
[22] F. Chavarria, D.R. Paul, Comparison of nanocomposites based on nylon 6 and nylon 66, Polymer
(Guildf). 45 (2004) 8501–8515. https://doi.org/10.1016/j.polymer.2004.09.074.
[23] N. Jia, V.A. Kagan, Mechanical Performance of Polyamides with Influence of Moisture and
Temperature – Accurate Evaluation and Better Understanding, in: Plastics Failure Analysis and
Prevention, Elsevier, 2001: pp. 95–104. https://doi.org/10.1016/b978-188420792-1.50014-7.
[24] F. Li, J. Sun, H. Xie, K. Yang, X. Zhao, Thermal deformation of PA66/carbon powder composite made
with fused deposition modeling, Materials. 13 (2020). https://doi.org/10.3390/ma13030519.
[28] W. Hao, Y. Liu, T. Wang, G. Guo, H. Chen, D. Fang, Failure analysis of 3D printed glass fiber/PA12
composite lattice structures using DIC, Composite Structures. 225 (2019).
https://doi.org/10.1016/j.compstruct.2019.111192.
[29] B. Yang, J. Leng, B. He, H. Liu, Y. Zhang, Z. Duan, Influence of fiber length and compatibilizer on
mechanical properties of long glass fiber reinforced polyamide 6,6, Journal of Reinforced Plastics and
Composites. 31 (2012) 1103–1112. https://doi.org/10.1177/0731684412454199.
[30] A. Hassan, R. Yahya, A.H. Yahaya, A.R.M. Tahir, P.R. Hornsby, Tensile, impact and fiber length
properties of injection-molded short and long glass fiber-reinforced polyamide 6,6 composites,
Journal of Reinforced Plastics and Composites. 23 (2004) 969–986.
https://doi.org/10.1177/0731684404033960.
[31] T.N.A.T. Rahim, A.M. Abdullah, H.M. Akil, D. Mohamad, Z.A. Rajion, Preparation and characterization
of a newly developed polyamide composite utilising an affordable 3D printer, Journal of Reinforced
Plastics and Composites. 34 (2015) 1628–1638. https://doi.org/10.1177/0731684415594692.
[32] J. Li, Y.F. Zhang, The tensile properties of short carbon fiber reinforced ABS and ABS/PA6 composites,
Journal of Reinforced Plastics and Composites. 29 (2010) 1727–1733.
https://doi.org/10.1177/0731684409337551.
[33] Y. Lee, K.Y. Andrew Lin, E.E. Kwon, J. Lee, Renewable routes to monomeric precursors of nylon 66
and nylon 6 from food waste, Journal of Cleaner Production. 227 (2019) 624–633.
https://doi.org/10.1016/j.jclepro.2019.04.194.
[34] J. Tang, B. Xu, Z. Xi, X. Pan, L. Zhao, Controllable Crystallization Behavior of Nylon-6/66 Copolymers
Based on Regulating Sequence Distribution, Industrial and Engineering Chemistry Research. 57
(2018) 15008–15019. https://doi.org/10.1021/acs.iecr.8b02671.
[35] N. Vinoth Babu, N. Venkateshwaran, N. Rajini, S.O. Ismail, F. Mohammad, H.A. Al-Lohedan, S.
Siengchin, Influence of slicing parameters on surface quality and mechanical properties of 3D-
printed CF/PLA composites fabricated by FDM technique, Materials Technology. (2021).
https://doi.org/10.1080/10667857.2021.1915056.
[36] P. Wang, B. Zou, S. Ding, C. Huang, Z. Shi, Y. Ma, P. Yao, Preparation of short CF/GF reinforced PEEK
composite filaments and their comprehensive properties evaluation for FDM-3D printing,
Composites Part B: Engineering. 198 (2020). https://doi.org/10.1016/j.compositesb.2020.108175.
[38] O.K. Arigbabowo, J.S. Tate, Additive manufacturing of polyamide nanocomposites for electrostatic
charge dissipation applications, Materials Science and Engineering B: Solid-State Materials for
Advanced Technology. 271 (2021). https://doi.org/10.1016/j.mseb.2021.115251.
[39] G. Liao, Z. Li, Y. Cheng, D. Xu, D. Zhu, S. Jiang, J. Guo, X. Chen, G. Xu, Y. Zhu, Properties of oriented
carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling, Materials and
Design. 139 (2018) 283–292. https://doi.org/10.1016/j.matdes.2017.11.027.
[41] X. Peng, M. Zhang, Z. Guo, L. Sang, W. Hou, Investigation of processing parameters on tensile
performance for FDM-printed carbon fiber reinforced polyamide 6 composites, Composites
Communications. 22 (2020). https://doi.org/10.1016/j.coco.2020.100478.
[42] G. Liao, Z. Li, C. Luan, Z. Wang, X. Yao, J. Fu, Additive Manufacturing of Polyamide 66: Effect of
Process Parameters on Crystallinity and Mechanical Properties, Journal of Materials Engineering and
Performance. (n.d.). https://doi.org/10.1007/s11665-02.
[43] B.N. Turner, R. Strong, S.A. Gold, A review of melt extrusion additive manufacturing processes: I.
Process design and modeling, Rapid Prototyping Journal. 20 (2014) 192–204.
https://doi.org/10.1108/RPJ-01-2013-0012.
[44] S. Terekhina, T. Tarasova, S. Egorov, I. Skornyakov, L. Guillaumat, M.L. Hattali, The effect of build
orientation on both flexural quasi-static and fatigue behaviours of filament deposited PA6 polymer,
International Journal of Fatigue. 140 (2020). https://doi.org/10.1016/j.ijfatigue.2020.105825.
[45] Y. Zhao, K. Zhao, Y. Li, F. Chen, Mechanical characterization of biocompatible PEEK by FDM, Journal
of Manufacturing Processes. 56 (2020) 28–42. https://doi.org/10.1016/j.jmapro.2020.04.063.
[46] Y. Song, Y. Li, W. Song, K. Yee, K.Y. Lee, V.L. Tagarielli, Measurements of the mechanical response of
unidirectional 3D-printed PLA, Materials and Design. 123 (2017) 154–164.
https://doi.org/10.1016/j.matdes.2017.03.051.
[47] M. Dawoud, I. Taha, S.J. Ebeid, Mechanical behaviour of ABS: An experimental study using FDM and
injection moulding techniques, Journal of Manufacturing Processes. 21 (2016) 39–45.
https://doi.org/10.1016/j.jmapro.2015.11.002.
[49] X. Gao, D. Zhang, X. Wen, S. Qi, Y. Su, X. Dong, Fused deposition modeling with polyamide 1012,
Rapid Prototyping Journal. 25 (2019) 1145–1154. https://doi.org/10.1108/RPJ-09-2018-0258.
[50] T.N.A.T. Rahim, A.M. Abdullah, H.M. Akil, D. Mohamad, Z.A. Rajion, Preparation and characterization
of a newly developed polyamide composite utilising an affordable 3D printer, Journal of Reinforced
Plastics and Composites. 34 (2015) 1628–1638. https://doi.org/10.1177/0731684415594692.
[52] X. Gao, D. Zhang, X. Wen, S. Qi, Y. Su, X. Dong, Fused deposition modeling with polyamide 1012,
Rapid Prototyping Journal. 25 (2019) 1145–1154. https://doi.org/10.1108/RPJ-09-2018-0258.
[54] B. Akhoundi, A.H. Behravesh, Effect of Filling Pattern on the Tensile and Flexural Mechanical
Properties of FDM 3D Printed Products, Experimental Mechanics. 59 (2019) 883–897.
https://doi.org/10.1007/s11340-018-00467-y.
[55] B. Huang, S. Singamneni, Raster angle mechanics in fused deposition modelling, Journal of
Composite Materials. 49 (2015) 363–383. https://doi.org/10.1177/0021998313519153.
[56] Institute of Electrical and Electronics Engineers., SHUSER 2012 : 2012 IEEE Symposium on
Humanities, Science and Engineering Research : Renaissance Hotel, Kuala Lumpur, Malaysia, 24 to 27
June 2012., IEEE, 2012.
[57] Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials 1, (n.d.).
https://doi.org/10.1520/D3039_D3039M-17.
[58] Designation: D 790-00 Standard Test Methods for Flexural Properties of Unreinforced and
Reinforced Plastics and Electrical Insulating Materials 1, n.d. www.astm.org.
[59] Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics 1, (n.d.).
https://doi.org/10.1520/D0256-10R18.
[60] Designation: D4065 − 20 Standard Practice for Plastics: Dynamic Mechanical Properties:
Determination and Report of Procedures 1, (n.d.). https://doi.org/10.1520/D4065-20.
[64] C.E. Pelin, G. Pelin, A. Ştefan, E. Andronescu, I. Dincă, A. Ficai, R. Truşcă, Mechanical properties of
polyamide/carbon-fiber-fabric composites, Materiali in Tehnologije. 50 (2016) 723–728.
https://doi.org/10.17222/mit.2015.171.
[65] M.P. Gashti, R. Assefipour, A. Kiumarsi, M.P. Gashti, Enzymatic surface hydrolysis of polyamide 6,6
with mixtures of proteolytic and lipolytic enzymes, Preparative Biochemistry and Biotechnology. 43
(2013) 798–814. https://doi.org/10.1080/10826068.2013.805623.
[66] N. Cheval, N. Gindy, C. Flowkes, A. Fahmi, Polyamide 66 microspheres metallised with in situ
synthesised gold nanoparticles for a catalytic application, Nanoscale Research Letters. 7 (2012).
https://doi.org/10.1186/1556-276X-7-182.
[67] M. Porubská, O. Szöllös, A. Kóňová, I. Janigová, M. Jašková, K. Jomová, I. Chodák, FTIR spectroscopy
study of polyamide-6 irradiated by electron and proton beams, Polymer Degradation and Stability.
97 (2012) 523–531. https://doi.org/10.1016/j.polymdegradstab.2012.01.017.
[68] E. Belmonte, M. de Monte, C.J. Hoffmann, M. Quaresimin, Damage mechanisms in a short glass fiber
reinforced polyamide under fatigue loading, International Journal of Fatigue. 94 (2017) 145–157.
https://doi.org/10.1016/j.ijfatigue.2016.09.008.
[69] E. Belmonte, M. de Monte, C.J. Hoffmann, M. Quaresimin, Damage initiation and evolution in short
fiber reinforced polyamide under fatigue loading: Influence of fiber volume fraction, Composites Part
B: Engineering. 113 (2017) 331–341. https://doi.org/10.1016/j.compositesb.2017.01.023.