The document contains G-code instructions for cutting a pattern into a material using a laser cutter or engraver. It homes the machine, sets units and coordinates, then performs a series of rapid moves (G00) and cutting moves (G01) to cut the pattern while turning the laser/spindle on (M106) and off (M107) between moves. The pattern involves lines moving back and forth across the Y axis between X positions of 5 and 199 in increments of 1 unit.
The document contains G-code instructions for cutting a pattern into a material using a laser cutter or engraver. It homes the machine, sets units and coordinates, then performs a series of rapid moves (G00) and cutting moves (G01) to cut the pattern while turning the laser/spindle on (M106) and off (M107) between moves. The pattern involves lines moving back and forth across the Y axis between X positions of 5 and 199 in increments of 1 unit.
The document contains G-code instructions for cutting a pattern into a material using a laser cutter or engraver. It homes the machine, sets units and coordinates, then performs a series of rapid moves (G00) and cutting moves (G01) to cut the pattern while turning the laser/spindle on (M106) and off (M107) between moves. The pattern involves lines moving back and forth across the Y axis between X positions of 5 and 199 in increments of 1 unit.