Professional Documents
Culture Documents
(RRFTSMRH°
I1_ IIH III
LAWN TRACTOR
24.0 HR* 42" Mower
Electric Start
Automatic Transmission
Model No.
917.28856
• EspaSol, p. 34
581901927
Warranty ................................................ 2 Maintenance ........................................ 16
Safety Rules .......................................... 3 Service and Adjustments ..................... 21
Product Specifications ........................... 6 Storage ................................................ 27
AssemblylPre-Operation ....................... 7 Troubleshooting ................................... 28
Operation ............................................... 9 Sears Service ........................ Back Cover
Maintenance Schedule ........................ 16
ADDITIONAL LIFETIME LIMITED WARRANTY on CAST IRON FRONT AXLE (if equipped)
FOR AS LONG AS IT IS USED by the original owner after the fifth year from the date of purchase, the
cast iron front axle (if equipped) of this riding equipment is warranted against any defects in material or
workmanship. With proof ofpurchase, a defective cast front axle wilI receive free in-home replacement.
WARRANTY SERVICE
For warranty coverage details to obtain free repair or replacement, call t -800-659-5917 or visit the
web site: www.craftsman.com
In alI cases above, if part repair or replacement is impossibIe, the riding equipment will be replaced
free of charge with the same or an equivalent modeS.
AII of the above warranty coverage is void if this riding equipment is ever used while providing
commercial services or if rented to another person.
This warranty covers ONI3" defects in material and workmanship. Warranty coverage does NOT
include:
• Expendable parts (except battery) that can wear out from normal use within the warranty period,
including but not limited to blades, spark plugs, air cleaners, belts, and oil filters.
° Standard maintenance servicing, oil changes, or tune-ups.
• Tire replacement or repair caused by punctures from outside objects, such as nails, thorns,
stumps, or glass.
.............................
•"Tireor wheel replacement or repair resulting'from normal wear, accident;Or improper operation or
maintenance.
• Repairs necessary because of operator abuse, including but not limited to damage caused by
towing objects beyond the capability of the riding equipment, impacting objects that bend the
frame, axle assembly or crankshaft, or over-speeding the engine.
• Repairs necessary because of operator negligence, including but not limited to, electrical and
mechanical damage caused by improper storage, failure to use the proper grade and amount
of engine oil, failure to keep the deck clear of flammable debris, or failure to maintain the riding
equipment according to the instructions contained in the operator's manual.
. Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or oxidized
(stale). In general, fuel should be used within 30 days of its purchase date.
• Normal deterioration and wear of the exterior finishes, or product label replacement.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Sears Brands Management Corporation, Hoffman Estates, tL 60179
2
_DANGER: This cutting machine is capable of amputating hands and feet and
throwing objects. Failure to observe the following safety instructions could result
in serious injury or death.
3
!1. SLOPE OPERATION • Keep children out of the mowing area
Slopes are a major factor related to toss of and in the watchful care of a responsible
control and tip-over accidents, which can adult other than the operator.
result in severe injury or death, Operation • Be alert and turn machine off if a child
on all s{opes requires extra caution. If you enters the area.
cannot back upthe slope or if you feel uneasy • Before and while backing, look behind
on it, do not mow it. and down for sma, children.
. Mow up and down slopes, not across. - Never carrychildren, even withthe blades
• Watch for holes, ruts, bumps, rocks, or shutoff. They mayfall offand beseriously
other hidden objects, Uneven terrain injured or interfere with safe machine
could overturn the machine, Tall grass operation. Children who havebeen given
can hide obstacles. rides inthe past may suddenly appear in
• Choose a low ground speed so that you the mowing area for another ride and be
will not have to stop or shift while on the run over or backed over by the machine,
s]ope. Never allow children to operate the ma-
• Donot mow onwet grass. Tires may lose chine.
traction. • Use extra care when approaching blind
Always keep the machine in gear when corners, shrubs, trees, or other objects
going downslopes. Donotshiftto neutral that may block your view of a child.
and coast downhill, IV. TOWING
• Avoid starting, stopping, or turning on a
Tow only with a machine that has a hitch
slope. Ifthetires Iosetraction, disengage designed for towing. Do not attachtowed
the blades and proceed slowly straight
equipment except at the hitch point.
down the slope. • Followthe manufacturer's recommenda-
- Keep all movement on the slopes slow tion for weight limitsfor towed equipment
and gradual. Do not make sudden and towing on slopes.
changes in speed or direction, which • Never allow children or others in or on
could cause the machine to roll over.
towed equipment,
• Use extra care while operating machine • On slopes, theweight ofthetowed equip-
with grass catchers or otherattachments;
ment may cause loss of traction and loss
they can affect the stability of the ma- of control.
chine, Do no use on steep slopes,
• Travel slowly and allow extra distance to
° Do not try to stabilize the machine by stop.
putting your foot on the ground.
. Do not mow near drop-offs, ditches, V, SERVICE
or embankments. The machine could SAFE HANDLING OF GASOLINE
suddenly roll over if a wheel is over the To avoid personal injury or property dam-
edge or if the edge caves in. age, use extreme care in handling gasoline.
IIh CHILDREN Gasoline is extremely flammable and the
..................................
,, .............................................................................. y_po[s..are.#xp!osive ...........
J_WARNING: CHILDRENCAr-.]BE INJURED • Extinguish aiicigareffes cigars_pil_es; .....
BYTHIS EQUIPMENT,The American Acade- and other sources of ignition.
my of Pediatrics recommends that children • Use only approved gasoline container.
be a minimum of 12 year of age before op- * Never remove gas cap or add fuel with
erating a pedestrian controlled lawn mower the engine running. Allow engine to cool
and a minimum of 16 years of age before before refueling.
operating a riding lawn mower. • Never fuel the machine indoors.
Tragic accidents can occur if the operator , Never storethe machine orfuel container
is not alert to the presence of children, where there is an open flame, spark, or
Children are often attracted to the machine pilot light such as on a water heater or
and the mowing activity. Never assume other appliances.
that children will remain where you last • Never fill containers inside a vehicle or
saw them. on a truck or trailer bed with plastic liner.
Always place containers on the ground
away from your vehicle when filling.
.Remove gas-powered equipment from • Nevertamperwith safetydevices. Check
the truck or trailer and refuel it on the their proper operation regularly.
ground. Ifthis is not possible, then refuel • Keep machine free of grass, leaves, or
such equipmentwith a portable container, other debris build-up. Clean oil or fuel
rather than from a gasoline dispenser spillage and remove any fuel-soaked de-
nozzle. bris. Allow machine to cool beforestoring.
• Keep the nozzle in contact with the rim • If you strike a foreign object, stop and
of the fuel tank or container opening at inspectthe machine. Repair, if necessary,
all times until fueling is complete. Do not before restarting.
use a nozzle lock-open device. • Never make any adjustments or repairs
• Iffuelis spilled on clothing, change cloth- with the engine running.
ing immediately. • Check grass catcher components andthe
- Never overfUlfuel tank. Replace gas cap discharge chute frequently and replace
and tighten securely. with manufacturer's recommended parts,
GENERAL SERVICE when necessary.
• Mowerbladesaresharp. Wraptheblade
• Never operate machine in aclosed area. or wear gloves, and use extra caution
• Keep all nuts and bolts tightto besurethe when servicing them.
equipment is in safe working condition. • Checkbrakeoperationfrequently. Adjust
and service as required.
• Maintain or replace safety and instruction • Be alert and turn machine off if a child
labels, as necessary. enters the area.
° Be sure the area is clear of bystanders • Before and while backing, look behind
before operating. Stop machine if anyone and down for small children.
enters the area. • Mow up and down slopes (15° Max), not
• Never carry passengers. across,
• Do not mowin reverse unless absolutely • Choose a low ground speed so that you
necessary. Always look down andbehind will not have to stop or shift while on the
before and while backing. slope.
• Never carry children, even with the • Avoid starting, stopping, or turning on a
...............................
blades.sh.ut.Qff,. _beY .may.fa!!.off and ..... slope, ifthetireslosetraction, disengage
be seriously injured or interfere with safe .............
thebladi_s-and-proceed slowlystraight ...................
machine operation. Children who have down the slope.
been given rides inthe past may suddenly • If machine stops while going uphill,
appear in the mowing area for another disengage blades, shift into reverse and
ride and be run over or backed over by back down slowly.
the machine. • Do notturnon slopes unless necessary,
Keep children out of the mowing area and then, turn slowly and gradually
and in the watchful care of a responsible downhill, if possible.
adult other than the operator. • Whenloadingorunfoadingthismachine,
do not exceed the maximum recom-
mended operation angle of 15°.
PRODUCT SPECIFICATIONS Inthe state of Califomiathe above is required
by law (Section 4442 of the California Public
Gasoline Capacity 3.0 Gallons/11,35 L
and type: Regu{ar Unleaded Resources Code), Other states may have
similar laws, Federal laws apply on federal
Oil Type: SAE 30 (above 32_F10_C) lands, A spark arrester for the muffler is
(API: SG-SL) SAE 5W30 (below 32°F10°C)
availablethrough your nearest Sears service
Oil Capacity: W/Filter: 64 Oz./1,96 L center (See REPAIR PARTS manual).
W/out Filter: 60 Oz./1,77 L
Spark Plug: Champion QC12YC REPAIR PROTECTION AGREEMENTS
(Gap: .040"/1.02 ram) Congratulations on making a smart pur-
Charging 8 Amps Battery chase. Your new Craftsman® product is
System: 5 Amps Headlights designed and manufactured for years of
Battery: Amp/Hr: 28 dependable operation. But like all products,
Min. CCA: 230 it may require repair from time to time. That's
Case size: U1R when having a Repair Protection Agreement
Blade Bolt Torque: 45-55 It, Lbs./62-75 Nm can save you money and aggravation.
Purchase a Repair Protection Agreement
CONGRATULATIONS on your purchase of now and protect yourself from unexpected
a new tractor. It has been designed, engi- hassle and expense.
neeredand manufactured togiveyou the best
possible dependability and performance. Here's what's included in the Agreement:
Should you experience any problem you can- • Expert service by our 12,000 professiona[
not easily remedy, please contact a Sears or repair specialists.
other qualified service center, Wehave com-
petent, well-trained representatives and the • U nlimited service and no chargefor parts
proper tools to service or repair this tractor. and labor on ail covered repairs.
Please read and retain this manual. The • Product repfacement if your covered
instructions witl enable you to assemble product can't be fixed,
and maintain your tractor properly. Always • Discount of 10% from regular price of
observe the "SAFETY RULES". service and service-related parts not
covered bythe agreement; also, 10% off
CUSTO MER RESPONSIBILITIES
regular price of preventive maintenance
• Read and observe the safety rules. check.
° Follow a regular schedule in maintaining, • Fast help by phone - phone support
caring for and using your tractor. from a Sears representative on products
• Follow instructions under "Maintenance" requiring in-homerepair, plus convenient
and "Storage" sections of this manual. repair scheduling.
• Wear proper Personal Protective Equip- Once you purchase theAgreement, asimple
ment (P PE) while operating this machine, phone call is all that it takes for you to sched-
including (ata minimum) sturdy footwear, ule service. Youcan call anytime day or night,
eye protection, and hearing protection, Do or schedule a service appointment online.
not mowinshorts and/oropentoedfootwear.
Sears has over 12,000 professional repair
• Always letsomeone know you are outside
......................................................................................................................................
specialists,_who, have access_to_over.4.5 ........
mowing, million quality parts and accessories. That's
_ILWARNING: This tractor is equipped with the kind of professionalismyou can count on
an internal combustion engine and should to help prolong the ]ire of your new purchase
not be used on or near any unimproved for years to come. Purchase your Repair
forest-covered, brush-covered or grass- Protection Agreement today!
covered land unless the engine's exhaust Some limitations and exclusions apply,
system is equipped with a spark arrester For prices and additional information call
meeting applicable local or state laws (if 1-800-827-6655.
any). if a spark arrester is used, it should SEARS INSTALLATION SERVICE
be maintained in effective working order by
the operator. For Sears professional installation of home
appliances, garage door openers, water
heaters, and other major home items, inthe
U.S.A. call 1-800-4-MY-HOME®
6
Slope Sheet
Keys
Your new tractor has been assembled at the factory with the exception of those parts left
unassembled for shipping purposes.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes are listed.
(t) 1/2" wrench Tire pressure gauge
LABEL
(2) 7/t 6" wrenches Utility knife
Pliers
8
These symbols may appear on your tractor or in literature supplied with the product,
Learn and understand their meaning,
R N H
REVERSE NEUTRAL HIGH LOW CHOKE FAST SLOW
IGNITION SWITCH
ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE ROWER HEIGHT MOWER LIFT
OPERATION
SYSTEM (ROS)
DANGER
will result indicates
in death aorhazard
seriouswhich, if not avoided,
injury.
WARNING
could resultindicates
in deatha or
hazard which, if not avoided,
serious injury.
FREE WHEEL
{Automatic Models only)
CAUTION indicates a hazard which, Injury.
if nOt avoided,
might result in minor or moderate
(A) ATTACHMENT LIFT LEVER - Used to (H) LIGHT SWITCH - Turns the headlights
raise and lower the mower or other attach- on and off,
ments mounted to your tractor, (J) CRUISE CONTROL LEVER - Used to
(B) BRAKE PEDAL - Used for braking the set forward movement of tractor at desired
....tracto_ and..s.ta_!.0g.tb_ .eDgjoe .....................................
speed, without holdingthe_orwarddrive ..................
(C) PARKING BRAKE - Locks clutch/ pedal.
brake pedal into the brake position. (K) FORWARD DRIVE PEDAL- Used for
(D) THROTTLE/CHOKE CONTROL- forward movement of tractor,
Used for starting and controlling engine (L) REVERSE DRIVE PEDAL- Used for
speed. reverse movement of tractor.
(E) ATTACHMENT CLUTCH LEVER (M) FREEWHEEL CONTROL - Disen-
- Used to engage the mower blades, or gages transmission for pushing or slowly
other attachments mounted to your tractor. towing the tractor with the engine off.
(F) IGNITION SWITCH - Used for starting (P) SERVICE REMINDER/HOUR METER
and stopping the engine. - indicates when service ]s required for the
(G) REVERSE OPERATION SYSTEM engine and mower.
(ROS) "ON" POSITION - Atlows operation
of mower or other powered attachment
while in reverse.
I0
The operation of any tractor can result in foreign objects thrown intol
the eyes, which can result in severe eye damage. Always wear safety_
glasses or eye shields while operating your tractor or performing anyt
adjustments or repairs. We recommend standard safety glasses or al
wide vision safety mask worn over spectacles. |
HOW TO USE YOUR TRACTOR • Turn ignition key (F) to "STOP" position
TO SET PARKING BRAKE and remove key. Always remove keywhen
Your tractor is equipped with an operator leavingtractorto prevent unauthorized use.
presence sensing switch. When engine is • Never use choke to stop engine.
running, any attempt bythe operator to leave IMPORTANT: Leaving the ignition switch in
the s eat without first setting the parking brake any position otherthan "STOP" will cause the
will shut off the engine. battery to discharge and go dead.
1. Depress brake pedal (B) alltheway down NOTE: Under certain conditions when tractor
and hold. is standing idle with the engine running, hot
2, Pull parking brake lever (C) up and hold, engine exhaust gases may cause "brown-
release pressure from brake pedal (B), ing" of grass. To eliminate this possibility,
then release parking brake lever. Pedal always stop engine when stopping tractor
should remain in brake poSition. Make on grass areas.
sure parking brake will hold tractor se- _lb CAUTION: Always stop tractor com-
cure,
pletely, as described above, before leaving
the operator's position.
TO USE THROTTLE CONTROL
Always operate engine at full speed (fast).
. Operating engine at less than full speed
(fast) reduces engine's operating effi-
ciency.
• Full speed (fast) offers the best mower
performance.
STOPPING
MOWER BLADES -
• To stop mower blades, move attachment
clutch controlto disengaged position (r_l).
12
REVERSE OPERATION SYSTEM (ROS) TO TRANSPORT
Your tractor is equipped with a Reverse When pushing or towing your tractor, be
Operation System (ROS). Any attempt by sure to disengage transm(ssion by placing
the operator to travel in the reverse direction freewheel control in freewheeling position.
with the attachment clutch engaged will shut Freewheel control is located at the rear
off the engine unless ignition key is placed drawbar of tractor.
in the ROS "ON" position. 1. Raise attachment lift lever to its highest
position.
_,WARNING: Backing up with the at- 2. Pullfreewheel control out and into the slot
tachment clutch engaged while mowing is and release so it is held inthe disengaged
strongly disco(Jraged.Turning the ROS"ON", position,
to allow reverse operation with the attach- • Do not push or tow tractor at more than
ment clutch engaged, should only be done two (2) MPH.
when the operator decides it is necessaryto • Tore-engagetransmission, reverse above
reposition the machine with the attachment procedure.
engaged. Do not mow in reverse unless
absolutely necessary. Transmission Engaged
USING THE REVERSE OPERATION
SYSTEM -
Only use if you are certain no children or
other bystanders will enter the mowing area.
1, Depress brake pedal all the way down,
2. With engine running, turn ignition key
countercloclcNise to ROS "ON" position.
3. Look down and behind before and while
Transmission Disengaged
backing.
4. Slowly depress reverse drive pedal to
start movement. NOTE: To protect hood from damage when
5. When use ofthe ROS is no !onger needed, transporting your tractor on atruck or atrailer,
be sure hood is closed and secured to tractor,
turn the ignition key clockwise to engine
"ON" position. Use an appropriate means of tying hood to
tractor (rope, cord, etc.).
ROS "ON"Position Engine"ON"Position
(NormalOperating) TOWING CARTS AND OTHER ATTACH-
MENTS
Tow only the attachments that are recom-
mended by and comply with specifications
of the manufacturer of your tractor. Use
common sense when towing, Too heavy of
a load, while on a slope, is dangerous. Tires
can lose traction with the ground and cause
TO OPERATE ON HILLS you to lose control of your tractor.
all'WARNING: Do not drive up or down _m=_vnr_ nPMUtaDER/HOUR METER
hills with slopes greater than 15° and do not .... ." ..... ......... .
.......................
ariveacros-s any s[ope_Llse_tlle_sl6p_e guide Serv(ce remlndershows the totafnumber OT....
provided at the back of this manual, hours the engine has run and indicates when
• Choose the slowest speed before start- the engine or mower needs servicing. After
ing up or down hills. every 50 hours of operation the oil can icon
will stay on for 2 hours or until a manual reset
• Avoid stopping or changing speed on hills.
occurs. To reset the display manually turn
• If stopping is absolutely necessary, push
the ignition switch to the on position, then
brake pedal quickly to brake position and
engage parking brake. the off position five times (1 second on, 1
° Torestart movement, slowly release park- second off). To service engine and mower,
see the Maintenance section of this manual.
ing brake and brake pedal.
• Slowly depress appropriate drive pedal to Note: Service reminder runs when the
slowest setting. ignition key is in any position but "STOP".
• Make all turns slowly. For accurate reading, be sure key remains
in the "STOP" position when engine is not
running.
13
BEFORE STARTING THE ENGINE 2. Sit on seatin operating position, depress
CHECK ENGINE OIL LEVEL brake pedal and set parking brake.
The engine inyour tractor has been shipped, 3. Move attachment clutch to disengaged
position.
from the factory, already filled with summer
weight oil. 4. Move throttle control to choke position.
1. Check engine oil with tractor on level NOTE: Before starting, read the warm and
ground. cold starting procedures below.
2. Remove oil fill cap!dipstick and wipe 5, Insert key into ignition and turn key
clockwise to start position and release
clean, reinsert the dipstick and screwcap
tight, wait for a few seconds, remove and key as soon as engine starts. Do not run
read oil level. If necessary, add oil until starter continuously for more than fifteen
"FUL[_ mark on dipstick is reached. Do seconds per minute. If the engine does
not overfill. not start after several attempts, move
• For cold weather operation you should throttle control to fast position, wait a
change oil for easier starting (See the oil few minutes and try again. If engine still
does not start, move the throttle control
viscosity chart inthe Maintenance section
of this manual). back to the choke position and retry.
• Tochange engine oil, see the Maintenance WARM WEATHER STARTING (50°F/10 °
section in this manual. C and above)
ADD GASOLINE 6. When engine starts, move the throttle
• Fill fuel tank to bottom of filler neck. Do control to the fast position,
not overfill. Use fresh, clean, regular • The attachments and ground drive can
unleaded gasoline with a minimum of nowbe used. Iftheengine does not accept
87 octane. (Use of leaded gasoline will the load, restart the engine and allow itto
increase carbon and lead oxide deposits warm up for one minute usingthe choke
and reducevaive life), Do not mix oilwith as described above.
gasoline. Purchase fuel in quantities that COLD WEATHER STARTING ( 50°F/10 ° C
can be used within 30 days to assure fuel and below)
freshness.
6. When engine starts, leavethrottle control
_CAUTION: Wipe offany spilled oil or fuel.
Do not store, spill or use gasoline near an in choke position until engine warms up
open flame. and begins to run roughly. Once rough
running begins, immediately move the
IMPORTANT: When operating in tempera- throttle control to the fast position. Engine
tures below 32°F(0°C), use fresh, clean
warm-up maytake from several seconds
winter grade gasoline to help insure good
to several minutes (the colder the tem-
cold weather starting.
perature, the longer the warm-up).
CAUTION: Alcohol blended fuels (called
gasohol or using ethanol or methanol) can AUTOMATIC TRANSMISSION WARM UP
attract moisture which leads to separation Before driving the unit in cold weather, the
and formation of acids during storage. Acidic transmission should be warmed up as fol-
gas can damage the fuelsystem of an engine lows:
whilein storage. To avoid engine problems, I, Be sure the tractor is on level ground,
the fuel system should be emptied before 2 Release the _,arkin ,_ brake and let the
.........................
storage of 30. days .or longer.. Drain 4he-gas .............
_._........____. ..._ __._.,_
...........
_u...................
_...................
,_......................
tank, start the engine and let it run until the DraKe sJowly return [o operating posmon
fuel lines and carburetor are empty. Use 3. Allowoneminutefortransmissionto
freshfuel next season. SeeStorage Instruc- warm up. This can be done during the
tions for additional information. Never use engine warm up period.
engine or carburetor cleaner products in the • The attachments can also be used dur-
fuel tank or permanent damage may occur. ing the engine warm-up period after the
TO START ENGINE transmission has been warmed up.
NOTE: tfat a high altitude (above 3000 feet)
When starting the engine for the first time or or in cold temperatures (below 32°F/0°C)
if the engine has run out of fuel, it will take the carburetor fuel mixture may need to be
extra cranking time to move fuel from the adjusted for best engine performance (see
tank to the engine. "TO ADJUST CARBURETOR"In the Service
1. Be sure freewheel control is in the trans-
and Adjustments section of this manual).
mission engaged position.
14
PURGE TRANSMISSION MOWING TIPS
_ILCAUTION: Never engageordisengage • Tire chains cannot be used when the
freewheel lever while the engine is running. mower housing is attached to tractor.
Toensure proper operation and performance, • Mower should be properly leveled for
it is recommended that the transmission be best mowing performance. See '*TO
purged before operating tractor for the first LEVEL MOWER HOUSING" in the
time. This procedurewill remove anytrapped Service and Adjustments section of this
air inside the transmission which may have manual.
developed during shipping of your tractor. • The left hand side of mower should be
IMPORTANT: Should your transmission used for trimming.
require removal for service or replacement, • Drive so that clippings are discharged
it should be purged after reinstattation before onto the area that has already been
operating the tractor. cut. Have the cut area to the right of
1. Place tractor safely on a level surface - the tractor. This will result in a more
that is clear of objects and open - with even distribution of clippings and more
engine off and parking brake set. uniform cutting,
2. Disengage transmission by placing • When mowing large areas, start by
freewheel control in disengaged position turning to the right so that clippings will
(See 'q'O TRANSPORT" in this section discharge away from shrubs, fences,
of manual). driveways, etc. After one or two rounds,
3. Sitting in the tractor seat, start engine. mow in the opposite direction making
After the engine is running, move throttle left hand turns until finished.
control to slow position. Disengage park- f
ing brake.
t
_CAUTION: At any time, during step 4,
there may be movement of the drive wheels.
4. Depress forward drive pedal to fullforward
position and hold for five (5) seconds and
release pedal. Depress reverse drive
pedal to full reverse position and hold
for five (5) seconds and release pedal,
Repeat this procedure three (3) times.
• If grass is extremely tall, it should be
5. Shutoff engine and set parking brake.
mowed twice to reduce load and pos-
6. Engage transmission by placing free-
sible fire hazard from dried clippings.
wheel control in engaged position (See
"TO TRANSPORT" in this section of Make first cut relatively high; the second
to the desired height.
manual).
• Do not mow grass when it is wet.
7. Sitting in the tractor seat, start engine.
Wet grass will plug mower and leave
After the engine is running, move throttle
undesirable clumps. Allow grass to dry
control to half (1/2) speed. Disengage
before mowing.
parking brake.
8, Drive tractor forward for approximately ° Always operate engine at full thro_le
................................. wnen mowing to assure Defter mowing
:fiv;_-feet_tl_erl_t_ac.kwardsfor_fiW-feet{ ...........................
Repeatthisdriving procedurethreetimes. performance and proper discharge of
Your transmission is now purged and now material. Regulate ground speed by
ready for normal operation. selecting a low enough speed to give
the mower cutting performance as well
as the quality of cut desired.
• When operating attachments, select a
ground speed that will suit the terrain
and give best performance of the at-
tachment being used,
15
,,,,,,
MA|NTENANCE B'I=FO'RE EVERY EVERY EVERY EVERY EVERY BEFORE
SCHEDULE EACH
USE
B
HOURS
;_S
HOURS HOURS
160
HOURB
SEASON STORAGE
i =,ill= ==IIIIHNIIIHIH
Check Brake Operation v
_C.,heek T_re Press'are v" v"
Check Operator Presence & Roe Systems
Chock for Loose Fasteners V' 'v" v"
C Check/Replace Mower Blades
T Lubrication Chart
o / /
Che_k V-Baits
,HIll,
i
v"
Cheek t_.,0gine Oil Level V' ,v"
.Chan_e Engine Oil (wit,h oil t_lter)
Change Engine Q !! lwithoet oil filter_ v',,_ v"
N_ Clear Air Filter
18
AIR FILTER CLEAN AIR INTAKE/COOLING AREAS
Your engine will not run property using a To insure proper cooling, make sure the
dirbJ air filter. Clean the foam pre-cleaner grass screen, cooling fins, and other exter-
after every 25 hours of operation or every nal surfaces of the engine are kept clean
season, Service paper cartridge every at all times.
100 hours of operation or every season, Every 100 hours of operation (more often
whichever occurs first. under extremely dusty, dirty conditions),
Service air cleaner more often under dusty remove the blower housing and other cool-
conditions. ing shrouds. Clean the cooling fins and
1, Remove cover. external surfaces as necessary, Make sure
the cooling shrouds are reinstalled.
TO SERVICE PRE-CLEANER NOTE: Operating the engine with a
2. Wash it in liquid detergent and water. blocked grass screen, dirty or plugged
3. Squeeze it dry in a clean cloth. cooling fins, and!or cooling shrouds
4. Saturate it in engine oil. Wrap it in removed will cause engine damage clue to
clean, absorbent cloth and squeeze to overheating.
remove excess oil. MUFFLER
NOTE: If very dirty" or damaged_ replace Inspect and replace corroded muffler and
pro-cleaner. spark arrestor (if equipped) as it could cre-
ate a fire hazard and/or damage.
TO SERVICE CARTRIDGE
SPARK PLUG(S)
1. Clean cartridge by tapping gently on Replace spark plug(s) at the beginning
flat surface. If very dirt:/or damaged, of each mowing season or after every
replace cartridge. 100 hours of operation, whichever occurs
2. Reinstall precleaner cartridge, cover first, Spark plug type and gap setting are
and secure. shown in' PRODUCT SPECIFICATIONS"
IMPORTANT: Petroleum solvents, such section of this manual.
as kerosene, are not to be used to clean IN-LINE FUEL FILTER
the cartridge. They may cause deteriora-
The fuel filter should be replaced once
tion of the cartridge. Do not oil cartridge. each season. If fuel filter becomes
Do not use pressurized air to clean or dry
clogged, obstructing fuel flow to carbu-
cartridge,
retor, replacement is required.
1. With engine cool, remove filter and
_/Knobs ...._ plug fuel line sections.
2. Place new fuel filter in position in fuel
line with arrow painting towards carbu-
retor.
Cover _ 3. Be sure there are no fuel line leaks and
clamps are properly positioned,
4. Immediately wipe up any spilled gaso-
line.
iit ...........
/ca.,,dgo
Clamp.
.........................................................
F............
_, ...........................................................
__ _Clamp...........................
Foam
Pre-Cleaneri!_--_ Fuel Filte_ _---_-_
ENGINE OIL FILTER
Replace the engine oil filter every season or
every other oil change if the tractor is used
more than 100 hours in one year.
CLEAN AIR SCREEN
Air screen must be kept free of dirt and
chaff to prevent engine damage from
overheating. Clean with a wire brush or
compressed air to remove dirt and stub-
born dried gum fibers.
19
CLEANING
• Clean engine, battery, seat, finish, etc, Nozzle
of all foreign matter. Washout Port
• Clean debris from steering plate.
Debris can restrict clutch/brake pedal
shaft movement, causing belt slip and
toss of drive.
CAUTION: Avoid all pinch points and
movable parts
Clutch/brake pedal
discharge chute is directed AWAY from your Replace broken or missing washout fitting
house, garage, parked cars, etc. Remove immediately, prior to using mower again,
bagger chute or mulch cover if attached. Plug any holes in mower with bolts and
2. Make sure the attachment clutch control Iocknuts,
is in the "DISENGAGED" position, set
the parking brake, and stop the engine.
3. Thread the nozzle adapter (packaged
with your tractor's Operator's Manual)
onto the end of your garden hose.
4. Pull back the lock collar of the nozzte
adapter and push the adapter onto the
deck washout port at the left end of the
mower deck. Release the lock collar to
lock the adapter on the nozzle.
2O
WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER-
VICE OR ADJUSTMENTS:
1. Depress brake pedal fully and set parking brake.
2. Place attachment clutch in "DISENGAGED" position.
3. Turn ignition key to "STOP" and remove key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect spark plug wire from spark plug and place wire where it cannot
come in contact with plug,
TO REMOVE MOWER 8. Slide mower out from under right side of
1. Place attachment clutch in "DISEN- tractor.
GAGED" position. IMPORTANT: If an attachment other than
2, Lower attachment lift lever to its lowest the mower is to be mounted on the tractor,
position. remove the front link (E) and rear lift links
3. Roll belt off engine pulley (M) and belt (C) from tractor and hook the clutch spring
keepers (G), (Q) into the cable guide on front edge of
lower dash.
4. Remove retainer spring (K), slide collar
(L) off and push housing guide (P) out TO INSTALL MOWER
of bracket. Be suretractor is on level surface and engage
5. Remove clutch cable spring (Q) from parking brake.
idler arm (R). 1. Lower attachment lift lever to its lowest
6, Disconnect front link (E) from mower - position.
remove retainer spring and washer.
7. Go to either side of mower and discon- • lk CAUTION: Lift lever is spring loaded.
nect mower suspension arm (A) from Have a tight grip on lift lever, lower it slowly
chassis pin (B) and rear lift link (C) from and engage in lowest position.
rear mower bracket (D) - remove retainer NOTE: Be sure mower side suspension
springs and washers. arms (A) are pointing forward before sliding
_CAUTION: After rear liftlinks are discon- mower under tractor.
nected, the attachment lift leverwill be spring 2. Slide mower under tractor until it is cen-
loaded. Have a tight grip on lift lever when tered under tractor.
changing position of the lever.
03042tax
21
_
3. ATTACH MOWER SIDE SUSPENSION 7. Insert end of link (E) into hole in front
ARMS (A) TO CHASSIS - Position hole mower bracket (H) and secure with
in arm over pin (B) on outside of tractor washer and retainer spring (J).
chassis and secure with retainer spring.
4. Repeat on opposite side of tractor.
03042rex
22
TO LEVEL MOWER FRONT-TO-BACK ADJUSTMENT
Make sure tires are properly inflated to the IMPORTANT: Deck must be level side-
PSI shown ontires, Iftires are over or under to-side,
inflated, it may affect the appearance of your
lawn and lead you to think the mower is not Toobtain the best cutting results, the mower
adjusted properly. blades should be adjusted so the front tip is
VISUAL SIDE-TO-SIDE ADJUSTMENT 1/8" to 1/2" lower than the rear tip when the
_lboweris in its highest position.
1. With all tires properly inflated and if your CAUTION: Blades are sharp. Protect
lawn appears unevenly cut, determine your hands with gloves and/or wrap blade
which side of mower is cutting lower. with heavy cloth.
2. With a 3/4" or adjustable wrench, turn tift • Raise mower to highest position.
link adjustment nut (A) to the left to lower • Position any blade so the tip is pointing
LH side of mower, or,to the right to raise
LH side of mower, straight forward. Measure distance (B)
to the ground at front and rear tip of the
NOTE: Each ful[ turn of adjustment nut wilt blade.
change mower height about 3/16". • If front tip of blade is not 1/8" to 1/2" lower
than the rear tip, go to the front of tractor.
• With an tl/16" or adjustable wrench,
loosen jam nut A several turns to clear
adjustment nut B.
23
TO REPLACE MOWER BLADE DRIVE BELT INSTALLATION -
BELT !. Install new belt from tractor rear to front,
The mower blade drive belt may be replaced over the steering plate (F) and above
without tools. Park the tractor on level sur- clutch brake pedal shaft (G).
face. Engage parking brake. 2. Pull belt toward front of tractor and roll
BELT REMOVAL - belt onto engine pulley (E).
3. Pull belt toward rear of tractor. Carefully
1. Remove mowerfromtractor (See"TO RE- work belt down around transmission
MOVE MOWER"inthis sectionofmanuaD. cooling fan and onto the input pulley (D).
2. Work belt off both mandrel pulleys and Be sure belt is inside the belt keeper.
idler pulleys. 4. Install belt on centerspan idler (C).
3. Pull belt away from mower. 5. Install belt through stationary idler (A)
BELT INSTALLATION - and clutching idler (B).
1. Work belt around both mandrel pulleys 6. Make sure belt is in all pulley grooves
and idler pulleys and inside all belt guides and keepers.
2. Make sure belt is in all pulley grooves 7. Install mower (See "TO INSTALL MOW-
and inside all belt guides. ER" in this section of manual).
3. Lns_ll mower (See "To Install Mower" in
this section of this manual).
Mandrel Idler
Pulleys
Mandrel
24
TO CHECK BRAKE TO START ENGINE WITH A WEAK BAT-
If tractor requires more than five (5) feet to TERY
stop at highest speed in highest gear on a _kWARNING: Lead-acid batteries generate
level, dry concrete or paved surface, then explosive gases. Keep sparks, flame and
brake must be serviced. smoking materials away from batteries.
You may also check brake by: Always wear eye protection when around
1, Park tractor on a level, dry concrete or batteries,
paved surface, depress brake pedal Ifyour battery istoo weakto startthe engine,it
all the way down and engage parking should be recharged. (See "BATTERY" inthe
brake, MAINTENANCE section of this manual),
2. Disengage transmission by placing If "jumper cables" are used for emergency
freewheel control in "transmission dis- starting, follow this procedure:
engaged" position. Pull freewheel con- IMPORTANT: Your tractor is equipped with
trol out and intothe slot and release so a 12voltsystem. The othervehicle must also
it is held in the disengaged position. be a 12 volt system, Do not use your tractor
The rear wheels must lock and skid battery to start other vehicles.
when you try to manually push the tractor TO ATTACH JUMPER CABLES -
forward. If the rear wheels rotate, then the
brake needs to be serviced. Contact a I, Connect one end ofthe RED cable tothe
Sears or other qualified service center, POSITIVE (+) terminal of each battery(A-
B), taking care nottoshort againsttractor
FRONT WHEEL TOE-IN/CAMBER chassis.
Your new tractor front wheel toe-in and 2. Connect one end of the BLACK cable
camber is set at the factory and is normal. to the NEGATIVE (-) terminal (C) of fully
The frontwheel toe-in and camber are charged battery.
3. Connect the other end of the BLACK
not adjustable. If damage has occurred to
affect the factory set front wheel toe-in or cable (D) to good chassis ground, away
camber, contact a Sears or other qualified from fuel tank and battery.
service center, TO REMOVE CABLES, REVERSE ORDER
TO REMOVE WHEEL FOR REPAIRS
1. Block up axle securely. 1, BLACK cable first from chassis and then
2, Remove axle cover, retaining ring and from the fully charged battery.
washers to allow wheel removal (rear 2. RED cable last from both batteries;
wheels have a square key- Do not lose).
3, Repair tire and reassemble.
NOTE: On rearwheels onty: aUgngroovesin 1
rear wheel hub and axle. Insert square key.
4. Replace washers and snap retaining ring
securely in axle groove.
5. Replace axle cover.
NOTE: To seal tire punctures and prevent
flat tires due to slow leaks, purchase and Weak or Dead Fully Charged
usetire sealantfrom Sears. Tiresealant also Battery Battery
..............
prevents_tire dry_rotandcorrosion; ...............................
Washers
Retaining
Ring "\.\
Ax[e Cover
_-_Square Key (Rear
WheelOnly)
25
REPLACING BATTERY TO REMOVE HOOD AND GRILL AS-
n_aSARNING: Do not short batten./terml- SEMBLY
y allowing awrench or any other object 1. Raise hood.
to contact both terminals at the same time. 2. Unsnap headlight wire connector.
Before connecting battery, remove metal 3. Stand in front of tractor. Grasp hood at
bracelets, wristwatch bands, rings, etc. sides, tilt toward engine and lift off of
Positive terminal must be connected first to tractor.
preventsparkingfrom accidental grounding. 4. When replacing hood, be sure to recon-
nect the headlight wire connector.
1. Lift hood to raised position.
2. Remove terminal cover.
3. Disconnect BLACK battery cable then
RED battery cable and carefully remove
battery from tractor. iH°°d
e
4. Install new batterywithterminats in same
position as old battery.
5. Reinstall terminal cover.
6. First connect RED battery cable to posi-
tive (+) battery terminal with bolt and nut
as shown. Tighten securely.
7. Connect BLACK grounding cable to
negative (-) batteryterminalwith remain-
ing bolt and nut. Tighten securely
8. Close hood, TRANSMISSION REMOVAL/
REPLACEMENT
Should your transmission require removalfor
service or replacement, it should be purged
after reinstallation and before operating the
tractor. See "PURGE TRANSMISSION" in
the Operation section of this manual,
ENGINE
TO ADJUST THROTTLE CONTROL
CABLE
The throttle control has been preset at
the factor:i and adjustment should not be
necessary Check adjustment as described
TO REPLACE HEADLIGHT BULB below before loosening cabte_ If adjustment
1. Raise hood. is necessary, see engine manual.
2. Remove bulb holderfrom the hole inthe TO ADJUST CHOKE CONTROL
backside of the grill. The choke control has been preset at the
...........................
3._..Replace=bulb in holder and install,bulb ,--factoryand adjustment should not beneces-
holder securely back into the hole in the sary. If adjustment is necessary, see engine
backside of the grill. manual.
4. Close hood. TO ADJUST CARBURETOR
INTERLOCKS AND RELAYS Your carburetor has been preset at the factory
Loose or damaged wiring may cause your and adjustment should not be necessary.
tractor to run poorly, stop running, or prevent However, minor adjustment may be required
it from starting. to compensate for differences in fuel, tem-
• Check wiring, perature, altitude or load. If the engine does
TO REPLACE FUSE need adjustment, see engine manual.
Replace with 30 amp automotive-type plug-
in fuse. The fuse holder is located behind
the dash.
26
Immediately prepare your tractor for storage • Empty thefuel tank by starting the engine
at the end of the season or if the tractor will and letting it run until the fuel lines and
n_tbe used for 30 days or more. carburetor are empty.
WARNING: Never store the tractor with • Never use engine or carburetor cleaner
gasoline in the tank inside a building where products in the fuel tank or permanent
fumes may reach an open flame or spark. damage may occur.
Allow the engine to cool before storing in • Use fresh fuel next season,
any enclosure. NOTE: Fuel stabilizer is an acceptable al-
ternative in minimizing the formation of fuel
TRACTOR gum deposits during storage. Add stabilizer
When tractor is to be stored for a period to gasoline in fuel tank or storage container,
of time, clean it thoroughly, remove all dirt, Always follow the mixratio found on stabilizer
grease, leaves,etc. Store inaclean, dryarea. container. Run engine at least 10 minutes
1. Clean entire tractor (See"CLEANING" in after adding stabilizer to allowthe stabilizerto
the Maintenance section of this manual). reach the carburetor. Do not empty the gas
2. Inspect and replace belts, if necessary tank and carburetor if using fuel stabilizer.
(See belt replacement instructions in the ENGINE OIL
Service and Adjustments section of this Drain oil (with engine warm) and replace
manual). with clean engine oil. (See "ENGINE" in
3. Lubricate as shown in the Maintenance the Maintenance section of this manual).
section of this manual. CYLINDER(S)
4. Be sure that all nuts, bolts and screws
I. Remove spark plug(s).
are securely fastened. Inspect moving
2. Pour one ounce of oil through spark plug
parts for damage, breakage and wear.
hole(s) into cylinder(s).
Replace if necessary.
3. Turn ignition key to start position for a
5. Touch up all rusted or chipped paint few seconds to distribute oil,
surfaces; sand lightly before painting.
4. Replace with new spark plug(s),
BATTERY
OTHER
• Fully charge the battery for storage.
• After a period of time in storage, battery • Do not store gasoline from one season to
another.
may require recharging. • Replace your gasoline can if your can
. To help prevent corrosion and power
starts to rust. Rust and/or dirt in your
leakage during long periods of storage,
gasoline will cause problems.
battery cables should be disconnected
• If possible, store your tractor indoors and
and battery cleaned thoroughly (see "TO
CLEAN BATTERY AND TERMINALS" in cover it to give protection from dust and
dirt.
the Maintenance section of this manual).
• Cover your tractor with a suitable protec-
• Aftercleaning, leavecables disconnected tive cover that does not retain moisture.
and place cables where they cannot come
in contact with battery terminals Do not use plastic. Plasticcannot breathe
.................
•"If battery is remo_'J'edfrom tractor foi ................
which allowscondenSation to forniand ...........
storage, do not store battery directly on will cause yourNever
tractor to rust.
IMPORTANT: cover tractor while
concrete or damp surfaces, engine and exhaust areas are still warm,
ENGINE
FUEL SYSTEM
IMPORTANT: It is important to prevent
gum deposits from forming in essential fuel
system parts such as carburetor, fuel hose,
or tank during storage. Also, alcohol blended
fuels (called gasohol or using ethanol or
methanol) can attract moisture which leads
to separation and formation of acids during
storage. Acidic gas can damage the fuel
system of an engine while in storage.
27
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center.
PROBLEM CORRECTION ......
.......
,,,, , ...............
Out of fuel 1. Fill fuel tank.
5 Stale or dirty fuel. 5 Empty fuel tank and refiIt tank witl _
fresh, clean gasoline,
i
6 Loose or damaged wiring, 6 ! Check all wiring.
Engine wilt not 1 Clutch!brake pedal not depressed 1 Depress clutch/brake pedal.
turn over
2 Attachment clutch is engaged. 2 Disengage attachment clutch.
28
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center.
PROBLEM CAUSE CORRECTION
, ,,u,,
LOSS of power 1 Cutting too much grass/too fast. 1 Raise cutting height!reduce speed.
8 Stale or dirty fuel, 8 Empty fuel tank and refill tank witi _
fresh, clean gasoline,
I0 Spark p]ug wire loose. 10 Connect & tighten spark plug wire
Excessive vibration 1 Worn, bent or loose blade. 1 Replace blade, Tighten blade bolt
29
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center,
3O
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center.
Engine "backfires" 1 Engine throttle control not se Move throttle control between
when tuminq between half and full speed (fastl half and full speed (fast) position
engine "OFF" position before stopping engine before stopping eng=ne.
Engine dies when Reverse operation system (ROS) Turn ignition key to RO8 "ON"
tra6tor is shifted is not "ON" while mower or other position. See Operation section.
into reverse attachment is engaged.
manage home
brought to you by Sears
31
SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION
15 DEGREES MAX.
1
down the face of slopes, never across the face. Do not mow
_1 ARNING: To avoid serious injury, operate your tractor up and
slopes greater than 15 degrees. Make turns gradually to prevent
tipping or loss of control. Exercise extreme caution when
changing direction on slopes.
GARANT{A LIMITADA DE PeR VIDA ADICIONAL en el EJE DELANTERO DE HIERRO COLADO (si
estb provisto)
DURANTE EL TIEMPO EN QUE 8E USE per ef propietano original despu@s de] quinto aSo a partir de Ia
fecha de compra, el eje delantero de hierro celade (si est,_ provisto) de este equipo tractos est,, garantizado
centre cualquier defecte de material o mane de obra. Con el comprobante de compra, un eje delantero de
hierre colado recibir_ un reemplazo gratuito encasa.
SERVlClO DE GARANTiA
Pare conecer [es detatles de la cobertura de garant{a pare obtener una reparaci6n e reemplazo gratuito,
Ilame al 1-800-659_59!7 8 visite el sit[o web: www. craftsman.corn
En todos los cases anterieres, si el reemp[azo es imposible, el equipo tractor ser_ suetituido sin cargo con
el misme modelo o uno equivalente.
Toda la cobertura de garantia anterior set& nula si este equipo tractor se utiliza alguna vez para brindar
servicios comerciales o si se alquila a otra persona.
33
_JkPELIGRO: Esta Maquina cortadora es capaz de amputar las manosy los p_es y de lanzar
objetos, si no se observan las instrucciones de seguridad siguientes se pueden producir
lesiones graves o la muerte.
4_ADVERTENCIA: Siempre desconecteel atam- • No maneje la m&quina si no tiene la trampa
bre de la bujfa y p6ngalo donde no pueda entrar para c_sped corn pleta, Ia canateta de descarga
en contacto con la bujfa, para evitar el arranque u otros dispositivos de seguridad en su Iugar
per accidente, durante la preparaci6n, e] trans- yen funcionamiento.
porte, el ajuste o cuando se hacen reparaciones. - Ralentizar antes de girar.
_DVERTENCIA: No avarice cuestaabajo a pun- • Nunca dejar una m_.quina encendida sin vJgi-
to muerto ya que podrfa perderel control deltractor. Iancia. Apagar siempre fas cuchillas, poner el
freno de estacionamiento, parar el motor, y
_.DVERTENCIA: Remolque solamente los quitar las [laves antes de bajar.
accesorios recomendados y conformes alas • Desenganche las hojas cuando no est@cortan-
caracteristicas indicadas per el fabricante de su do c_sped. Apague el motor y espere hasta que
tractor. Tenga cuidado y prudencia al utilizar el todas las partes se detengan per completo an-
tractor. Cuando se encuentre en un declive, oper tes de limpiar la m&quina, retirar la trampa para
utilizandoexclusivamente la velocidad m,_s baja. c@sped o destapar la canaleta de descarga.
En case de un dec]ive una carga excesiva po- • Hacer funcionar la m_.quina s61ocon la luz del
drta resuitar peligrosa. Los neum_.ticos pueden dia o luz artificial buena.
perder la t_acci6n con el suelo y hacerle perder
el control de su tractor. • No hacer funcionar la m&quina estando bajo
los efectos de alcohol o droga.
_ADVERTENClA: El tube de escape deI motor, • Poner atenci6n al trdfico cuando se opera
algunos de sus constituyentes y a[gunos com- cerca de cal[es o se cruzan.
ponentes del vehiculo contienen o desprenden • Poner Ia maxima atenci6n al cargar o descar-
productos qufmicos conocidos en et Estado de gar la mdquina en una caravana o cami6n.
California come causa de c_.ncer y defectos at • Llevar siempre gafas de protecci6n cuando se
nacimiento u OtTOsdaSos reproductivos.
hace funcionar la m&quina.
4_a.DVERTENCIA: Los bornes, termina[es y ac- ° Los dates indicanque los operadores a partir
cesorios relatives de Ia baterfa contienen plomo de los 60 a_os estdn afectados per un gran
o compuestos de plomo, productos quimicos porcentaje de heridas re[ativas a ta conduccibn
conocidos en et Estado de California come causa deI cortac_sped. Estos operadores tendrlan
de cdncer y defectos al nacimiento u otros dafios que evaluar su habilidad de hacer funcionar
reproductivos, Lavar las manes despuds de el cortac@sped de mode Cobastante seguro
manipularlos. para proteger a st mismos y a otras personas
de heridas graves.
I. FUNCIONAMIENTO GENERAL
• Seguir Ias recomendaciones del fabdcante
•Leer, entenderyseguirtodaslasinstrucciones para los pesos y contrapesos de las ruedas.
sobre ta m&quina yen el manual antes de
° Mantener la mdquina Iibre de hierba, hojas u
empezar.
otros escombros que pueden tocar el tube de
• No poner las manes o los pies cerca de partes escape/partes deI motor calientes y quemarse.
giratodas o debajo de la maquina, mantener No permitir que el puente deI cortac6sped
siempre limpia Ia abertura de descarga. cargue hojas u otros residues que pueden
• Permitir el funcionamiento de la m_.qu[na sSIo causar acumulaciones. Limpiar toda salpica-
...........................................
a-adu]tosquetengan familiaridad-con las ............dura de aceiteo carburanteantesdehacer .....
instrucciones, operaciones sobre Ia m&quina o guardarla.
, Limpiar el &rea de objetos come piedras, Dejarla enfriar antes de guardarla.
juguetes, cables, etc. que pueden ser recogi-
dos y disparados con Ias cuchiilas. IL FUNCIONAMIENTO EN PENDIENTES
• Asegurarse de que el &tea est6 libre de otras Las pendientes son el mayor factorde accidentes
personas antes de poneria en marcha. Parar relatives a Ia p_rdida de control y vueico, que
la m&quina si alguien entra en el &tea. pueden causar severas heridas o muerte. El fun-
, Nunca Ilevar pasajeros. cionamiento en pendientes requiere una atenci6n
extra. Si no es posible hacer marcha atrds en una
, No cortar marcha atr&s al no ser absolu-
pendiente o site sientes incomodo, no Ia cortes.
tamente necesafio. Mirar siempre abajo y
delante mientras se precede atrd.s. • Cortar hacia arriba y abajo de una pendiente,
no de mode horizontal.
- Nunca didgir el material descargado hacia ha-
• Poner atenciones a los hoyos, las ralces, los
die. Evitar descargar material contra paredes
u obstrucciones. El material podda rebotar bultos, las piedras u otros objetos escondidos.
hacia el operador. Parar las cuchilJas cuando E] terreno irregular puede volcar la m_,quina.
se pasan superficies de grava. La hierba alta puede esconder obstdculos.
34
• Escoger una velocidad de marcha baja de • Tenet el m&ximo cuidado cuando se acerca
mode que no sea necesario pararse o cambiar a cantos ciegos, arbustos, &rboles u arras
estando en una pendiente. objetos que pueden impedir la vista de nifios.
° No cortar la hierba mojada. Las ruedas pueden
IV, REMOLQIJE
perder tracciSn.
Poner siempre una marcha cuando se est,. • Remolcar s61ocon una m&quina que tenga un
en pendientes. No poner en punto muerte e ir gancho disefiado para remo[car. Enganchar el
cuesta abajo. equipo o remolcar s6Io en el punte dispuesto
al efecto.
• Evitar arrancar, pararse o girar en una pendien-
te. Si las ruedas pierden tracci6n, desconectar • Seguir las recomendaciones det productor con
fas cuchillas y preceder despacio cuesta abajo respecto a los limites del equipo par remolcar
en Ia pendiente. y el remoique en pendientes.
• Mantener todo los rnovimientos en Ias pen- - Nunca permitir que ni_,os u otras personas
dientes lentos y gradual. No hacer cambios est_n dentro del equipo par remolcar.
repentinos de velocidad o direcci6n, ya qua o En pendientes, el peso del equipo remolcado
pueden causar el escape de la m&quina. puede causar la p_rdida de traccidn y Ia p6r-
dida de control.
• Poner la m_xima atenciSn cuando la m&quina
funciona con captadores de hierba u otros • Viajar despacio y dejar m&s distancia para
d}spositivos enganchados; pueden afectar la frenar.
estabilidad de la m&quina. No usar en pendi-
V. SERVICIO
entes empinados.
• No intentar estabilizar la m&quina poniendo el MANIPULAC](_N SEGURA DE LA GASOLINA
pie en ef terreno. Para evitar heridas personates o dafios alas
• No cortar cerca de bajadas, cunetas y orillas. cosas, poner el m_.ximo cuidado a la hera de
Las m&quina puede volcarse improvisamente manipular la gasolina. La gasolina es extrema-
si una rueda est,. en el borde o se hunde. mente inflamable y los vapores son explosives.
* Apagar todos los cigarrillos, cigarros, pipas y
I11.NINES otras fuentes de ignici6n.
,_ADVERTENCIA: LOS Nlt'_lOS PUEDEN * Usar s6le contenedores para gasolina aproba-
SUFRIR DANES CON EL usa DE ESTE EQUI- dos.
PO. La Academia Estadounidense de Pediatria • Nunca quitar el tap6n de Ia gasolina o afiadir
(American Academy of Pediatrics) recomienda carburante con et motor en marcha, dejar
que sSlo se permita aniSos con una edad mlni- enfriar et motor antes de] abastecimiento de
ma de I2 aries manejar m&quinas cortae6sped la gasolina.
manuates, y al menos de 16 arias para manejar " Nunca abastecer ta m&quina al interiorde un
tractores eortac_sped. local.
Si el operador no pone atenci6n a la presencia . Nunca guardar [a m&quina o el contenedor
de los niAos pueden ocurrir accidentes trAgicos. deI carburante donde haya una llama abierta,
Los nifios a menudo estAn atraidos par la rn&qui- chispas o una Iuz pilate coma un calentador
nay las actividad de cortar. No dar par hecho de agua u otros dispositivos.
de qua los nifios se queden adonde estaban la • Nunca llenar los contenedores al interior de
_ltima vez qua los vistes. un vehiculo o en una caravana o cami6n
• Mantener los nifios fuera del _.rea de carte y recubiertos con un forro de pI_stico. Colocar
....................
vigilados porun adulto responsabte que no sea ...................
siempre. Ioscontenedores en.eLterreno .Iejos.........................
el operador, det vehieulo cuando se est& Itenando.
• Estar alerta y apagar Ia m&quina si un niSos . Quitar el equipo de gas del cami6n o caravana
entra en el _rea. y abastecerlo en el terreno. Si no es posible,
• Antes y durante Ia marcha atr&s, mirar adelante abastecer cliche equipo con un contenedor por-
y abajo para vet si hay ni_os pequefios. t&tiI, m&s bien que de un surtidor de gasolina.
• Nunca Ilevar niSos, incluso si hay tas cuchillas • Mantener Ia boquilta a contaeto del borde
apagadas. Podrian caer y herirse seriamente del depSsito de carburante o la aber[ura del
contenedor durante toda la operacidn de
o inter[erir con el funcionamiento seguro de la
m&quina, los niSos qua se ban Ilevado prec- abastecimiento. No utilizar un dispositivo con
edentemente pueden aparecer de pronto en e] boqui!la cerrada-abierta.
&rea de carte par otto paseo y ser atropellados ° Si se vierte carburante sabre Ia ropa, cambi-
o tumbados par la m,_quina. arse la ropa inmediatamente.
• Nunca dejar que los niSos manipulen la m&- ° Nunca Ilenar el dep6sito m&s de lo debido.
quina. Volver a colocar el tap6n de! gas y cerrar de
mode firme.
35
OPERACIONES DE SERVtCIO GENERALES
• Nunca hater funcionar [a mbquina en un _rea • Si se golpea un objeto ajeno, hay que pararse
cerrada. e inspeccionar Ia m&quina. Reparar, si es
• Mantener todas las tuercas y pemos apretados necesario, antes de volver a poner en marcha.
para asegurarse de que trabaja en condiciones • Nunca hacer ning6n ajuste o reparaci6n con
seguras, el motor en funci6n,
• Nunca modificar los dispositivos de seguridad. , Verifique los componentes de ta trampa para
Controlar su correcto func[onamientoregular- c6sped y la canaleta de descarga con frecuen-
mente. ciay sustituya con repuestos recomendados
• Mantener la m&quina libre de hierba, hojas por el fabricante cuando sea necesadoo
u otros residuos acumulados. Limpiar las • Las cuchillas deI cortac6sped son afiladas.
salpicaduras de aceite o carburante y quitar Envolver la cuchilla, ponerse guantes y poner
cualqu[er cosa mojada con carburante. Dejar la m_L_imaatenci6n cuando se hacen opera-
que la m&quina se enfrie antes de guardada. ciones en elias,
• Controlar el funcionamiento del freno frecuent- • Estar alerta y apagar la m&quina si un niSos
emente. Ajustar y hacer las operaciones de entra en el &rea,
mantenimiento cuando eso sea necesar[o. • Antes y durante la marcha atr&s, mirar adelante
• Mantener y sustituir las etiquetas de seguridad y abajo para ver si hay nifios pequefios.
e instrucci6n, cuando sea necesario. • Cortar hacia arriba y abajo de una pendiente
• Asegurarse de que el &rea est6 libre de otras (15 ° M&x), no de modo horizontal.
personas antes de ponerla en marcha, para la ° Escoger una velocidad de marcha baja de
m&quina si alguien entra en el &rea. modo que no sea necesario pararse o cambiar
• Nunca Ilevar pasajeros. estando en una pendiente.
• No cortar marcha atr&s al no ser absolutamente • Ev;tar arrancar, pararse o girar en unapendien-
necesario. Mirar siempre abajo y delante te. Si las ruedas pierden tracciSn, desconectar
mientras se procede atr&s. las cuchillas y proceder despacio cuesta abaio
, Nunca Uevarnif_os, incluso si hay las cuchillas en _apendiente,
apagadas. Podr[an caer y herirse seriamente ° Si la m&quina se para mientras va cuesta
o interferir con el funcionamiento seguro de la arriba, desconectar las cuchillas, poner la
m&qu[na, los nifios que se hart Ilevado prec- marcha atr&s y ir hacia atr&s despacio,
edentemente pueden aparecer de pronto en el • No girar estando en pendientes si no es nece-
&rea de corte pot otro paseo y ser atropellados sarfo, y Iuego girar despacio y gradualmente
o tumbados pot la m&quina, cuesta abajo, si es posible.
................................
_.-.Mantener los nifios fuera del &rea. de corte.y .............
Alcargar odescargarla m&quina;no sobrepase .....
vigilados pot un aduIto responsable que no sea el _ngulo m__ximorecomendado de 15°.
el operador.
36
ESPECIFICACIONES DEL PRODUCTO En el estado de California, Ia ley exige _oanterior
(Secci6n 4442 del "California Public Resources
Capacidad y Tipo 3.0 Galenes/11,35 L
de Gasoline: Regular Sin Plomo Code"). Otros estados pueden center con otras
(eyes parecidas. [_asIeyes federates se aptican
Tipo de Aceite SAE 30 (sobre 32°F/0°C) en latierras federales. Su centre de Servicio m&s
,,(AP_:SG-SL): SAE5W30(deaba_32°F/O"C) cercano t/erie disponib/e amortiguadores de chiso
Capacidad de Con Filtro: 64 Ozj1,96 L pas pare el silenciador. (Vea la secci6n de Partes
Aceite: Sin Filtro: 60 Oz./1,77 L de Repuesto en el manual Ingles del dueSo.)
Bu_a Champion QC12YC ACUERDOS DE PROTECCI(_N PARA
(Abertura: .040"/1,02 mm) LA REPARAClON
Sistema de 3 Amps Bateria Congratu]aciones per su buena compra. Su
Carga: 5 Amps Luces nuevo producto Craftsman_ est,'_ diset_ade y
Baterla: AmpiHr: 28 fabricado para funcionar de mode fiable per
Mine CCA: 230 muchos aries. Pare come tedos los productos,
Modelo Tamale: U1R puede necesitar alguna reparaciSn de tanto en
tanto. En este case tenet un Aeuerdo de Protec-
Torsidn deI Perno 45-55 Ft. LbsJ62-75 Nm
de Ia Cuchilla: ci6n para Ia Reparaci6n puede hacerles ahorrar
dinero y fastidios.
FELICITACION ES per la compra de su tractor. Ha Compre ahora un Acuerdo de Protecci6n pare la
side diseSado, planificado y fabricado pan darle la Reparaci6n y prot_gese de molestias y gastos
mejor confiabilidad y el meier rendimiento posible. inesperados.
En el case de que se encuentre con cualquier Un Acuerdo inc/uye los puntos slguientes:
problema que no pueda solucionar f&citmente, • Servicio experto de nuestros 12.000 espe-
haga et favor de ponerse en contacto con un cialistas profesionales en ]a reparaci6n.
centre de 8ervJcJoSears o con un otto centre de
• Servicio ilimitado sin cargo a|guno para
servicio cuatificado. Cuenta con representantes tas partes y Ia mane de obra sobre todas Ias
bien capacitados y competentes y con las her- reparaciones garantizadas.
rarnientas adecuadas para darle servicio o pare
reparar este tractor. - Sustituci@n del producto si su producto
Haga el favor de leer y de guardar este manual. garantizado no puede ser arreglado.
Estas instruc-ciones le permitir&n montar y man- • Desouento de110% sobre el precio corriente
tenet su unidad en forma adecuada. Siempre def servicio y de las partes relativas al servicio
observe tas "REGLAS DE SEGURIDADf' no cubiertas per el acuerdo; tambi@n e! 10%
menos sobre el precio corriente de un control
RESPONSABILIDADES DEL CUENTE de mantenimiento preventive.
, Lea y observe las reglas de seguridad. • Ayuda r_ipidaper tel_fono- soporte telef6ni-
• Siga un programa regular de mantenimiento, co per parte de un representante Sears sobre
cuidado y use de su tractor. productos que requieren un arreglo en case, y
• Siga las instrucciones descritas en las sec- adern_s una programaci@nsobre tos arreglos
m&s convenientes.
clones "Mantenimiento" y '_.lmacenamiento"
de este manual, Cuando se ha comprado e] Acuerdo, basta con
unaI]amadatelef6nica pare programarel servicio.
• Utilice prendas de seguridad adecuadas al
Puede l[amar cuando quiera, die y noche o fijar
rnanejar la maquina, incluidos (come minim{>)
en linea una cite pare obtener e! servicio, Sears
calzado de seguridad, gafas protectoras y pro-
tiene m,_s de 12.000 especialistas profeslonales
tecci6n auditiva, No utitic_epantalones cortes en Ia reparaci6n, que tienen acceso a m&s de
y/o calzado abierto cuando corte la hierba.
4.5 millones de partes y accesorios de calidad.
_' nforme siempre
.............. ' a "alguien
' de que se dlspone
" _Estees el tipo de profesionalidadcon que puede ................
a cortar Ia hierba en el exterior, contar pare ayudar a alargar ta vida del pro-
_vADVERTENCIA: Este tractor viene equipado ducto que acaba de comprar, per touches aSos.
con un motor de combusti6n internay no se debe iCompre hey su Acuerdo de Protecci6n pare la
usar sobre, o cerca, de un terreno no desarroIIado Reparaci6n!
cubierto de bosques, de arbustos o de c_sped, Se apliean algunas |imRaciones y exclusiones.
o menos que el sistema de escape deI motor Para conocer los prec|os y tener m&8 Infor-
venga equipado con un amortiguador de chispas macibn, Ilame al 1-800-827-6655.
que cump]a con Ias leyes locales o estatales (si
existen). Si se usa un amortiguador de chispas, SERVIClO DE INSTALACION SEARS
el operador debe manteneflo en condiciones de Para ta instalacidn profesional Sears de apara-
trabajo eficientes. tos de case, puertas de garaje, calentadores de
agua y otros importantes arficulos para Ia casa,
en U.S.A ilamar a
1-800-4-MY-HOME_
37
L|aves Hoja de pendiente
Su tractor nuevo ha sido montado en la fAbrica con Ia excepci6n de aquellas partes que no se han
montado por razones de envio.
HERRAMIENTAS NECESARIAS PARA
EL MONTAJE
Un juego de I]aves de tubo facilitar& el montaje,
A continuaci6n se enumeran los tamaSos de tas
Ilaves est&ndar,
Etiqueta
(1) Llave de 1/2" Cuchillo
(2) Uaves de 7/16" Medidor de presi6n
Pinzas
38
AVISO: Ahora puede rodar o conducir su tractor t/LISTA DE REVISION
fuera de la corredera. Siga ]as siguientes instruc-
ciones para remover el tractor de la corredera, Antes de operar y de disfrutar de sutractor nuevo,
le deseamos que reciba el mejor rendimiento y la
_I, ADVERTENCIA: Antes de empezar, leer, en- mayor satisfaccion de este producto de calidad.
tender y seguir todas Ias instrucciones presentes t_ga el favor de revisar Ia Iista a continuation:
en la seccidn de Operaciones de este manual. Se han completado todas las instrucciones
Asegurarse que el tractor est@en un _rea bien de montaje.
ventilada. Asegurarse que Ia zona delante deI =/ No quedan partes sueltas en la oaja de
tractor est@libre de otras personas y objetos. cartbn.
V¢ La bateria est& preparada y cargada en forma
PARA HACER RODAR EL TRACTOR adecuada.
FUERA DE LA CORREDERA (Vea la sec- _/" El asiento ha sido ajustado en forma c6moda
ci6n de la operaci6n para la Iocalidad y y apretado en forma segura,
J Todas Ias Ilantas han sido infladasen forma
la funci6n de los controles)
adecuada, (Para fines de envio, tas llantas
t, Apriete Ia mani!Ia de tevantamiento del pist6n se inflaron demasiado en la fdbrica.)
y, Ievante Ia palanca de Ievantamiento del i/ Asegdrese que el oonjunto segador est_
accesorio a su posici6n m&s alta. nivelado en forma adecuada, de lado a lado y
2. Suelte el freno de estacionamiento presio- desde adelante hacia atr&s, para obtener los
nando el pedal deI freno. mejores resultados en el certe, (Las Ilantas
3. Ponga el control de la rueda libre en la tienen que estar infladas en forma adecuada
posici6n de giro libre para desenganchar la para la nivefaci6n.)
transmisi6n. (Vea "PARA TRANSPORTAR" v/" Revise las correas de impulsi6n y de la
en la secci6n de Operaci6n de este manual). segadora. AsegSrese que recorran el paso
(Vea "PARA TRANSPORTAR" en la secci6n adecuado alrededor de las poleas y dentro
de Operaci6n de este manual). de todos los fijadores de las correas.
4. Haga rodar el tractor hacia delante fuera de _/ Revise el alambrado. Fijese que todas las
la corredera. conexiones todav|a est_n seguras y que los
5. Remueva las bandas que sujetan ta protec- alambres est@nsujetos en forma adecuada.
ci6n contra ta descarga en contra del tractor. V¢ Antes de conducir el tractor, asegt3rese q.ue
el control de rueda libre este en la pos_c=on
REVISION DE LA PRESI()N DE LAS de "transmisi6n enganchada" (Vea "PARA
LLANTAS TRANSPORTAR" en Ia secci6n de la Oper-
Las Ilantas en su unidad fueron infladas de- aci6n de este manual).
masiado en la f&brica por razones de envio. La At misme tiempo que aprende a como usar su
presi6n de las llantas correctas es importante tractor, preste atencion extra a los puntos de
para obtener el mejor rendimiento en el core. ,portancia que se presentan a continuacion:
• Reduzca Ia presi6n de los neum&ticos a Ia PSI Et aceite det motor tiene que Ilegar at nivel
que se !ndica en estos. adecuado.
REVISION DE LA NIVELACI()N DEL Vr El estanque de combustible tiene que estar
CON JUNTO lleno con gasolina sin plomo regular, nueva
Para obtener los rnejores resultados en el corte, la y Iimpia,
J" Familiaricese con todos los controles - su
caja de Ia segadora tiene que estar nivelada en la ubicaci6n y su funci6n, Op@relos antes de
forma adecuada. Vea "PARA NIVELAR LA CAJA
hacer arrancar el motor.
DE LA SEGADOR_' en la secci6n de $ervicio y j" AseaSrese hue el sistema de ffenos est6 en
Ajustes de este manual. = - .'_ ..
REVISI6N DE LA POSICI()N ADECUADA J" _n;;u°rradris_6c_ed_u°Pe_r_Cs_nsegdur_'resencia
DE TODAS LAS CORREAS . . del Operador yeI Sistema de Funcionamiento
Vea las figuras que aparecen para camoiar Jas Atr&s (ROS) funcionan de modo adecuado
.correas-de =impulsi6n=deJacuchillade-lasega ......................
(Ver-ias=.Seccionesde-Funcionamiento=y=
dora y de movimiento en la secci6n de Servicio y _ Mantenimiento en este manual),
Aiustes de este manual. Verifique que Ias correas ti" Es importante purgar la tfansmisi6n antes
sigan su paso correcto, de operar su tractor por Ia primera vez. Siga
REVISION DEL SISTEMA DE FRENOS las instruccionesadecuadas para el empiezo
Unavezque usted hayaaprendidoamanejarsu ypara purgar (Vea "PARA EMPESAR EL
tractor, verifique que el freno funcione correcta- MOTOR" y "PARA PURGAR LA TRANS-
mente. Ver "PARA VERLRCAR SI FUNCIONA MtSION" en la secci6n de la Operaci6n de
este manual.
BIEN EL FRENO" en el capJtulo de servicio y
ajustes de este manual.
39
Estos stmbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto.
Aprenda y comprenda sus signiftcados.
R N H L I'-.I
MARC_ AT_S NEUTRO ALTO BAJO ESTRA_GU- R,_PIDO LENTO
LACION
LUCES
ENSENDIDAS COMBUSTIBLE BATERiA MARCHA MARCHA PALANCA DE MANDO PEDAL DE FRENO !
ATR._S HACIAADELANTE CRUCERO DE EMBRAGUE
ADVERTENCIA
puede provocar indica _Jnpeligro qua,graves.
si no se evita,
muerte o lesiones
RUEDA LIBRE
(Solamsnte para los PRECAUCI(SN
provocarindica Ltn peligro qua, si no se evita,
mod_los automatico) puede lesiones ligeras o moderadas.
4O
FAMILIAR|CESE CON SU TRACTOR
LEA ESTE MANUAL LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR
Compare Gasilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos
controles y ajustes. Guarde este manual para referencia en el future,
Nuestros tractores cumplen con Ios est&ndares de seguridad deI American National Standard Institute,
41
illl ill
La operacibn de cualqu|er tractor puede hacer que salten objetos extra_os I
COMO USAR
dentro de sus ojos, Io qua puede producir da_os graves en dstos. Siempre use
anteojos de seguridad o protecciones para los ojos mientras opera su tractor
o cuando haga ajustes o reparaciones Recomendamos gafas de seguridad o
una m_scara de visi6n amplia de segurJdad usada sobre las gafas.
PARADA
CUCHtLLAS DE LA SEGADORA -
- Mueva la control del embrague deI accesorio
a la posici6n desenganchado (t_),
42
UTILIZAR EL MANDO CRUCERO PARA AJUSTAR LAS RUEDAS CALIBRA-
El mando crucero se puede utilizar s6Io durante DORAS
la marcha hacia ade]ante. Las ruedas calibradoras estdn bien ajustadas
CARACTERiSTICAS TE_CNICAS cuando se encuentran un poco a distancia del
terraria at mismo tiempo que la segadora est6 a
EI control de ve[ocidad crucero s61a debe usarse la attura de carte deseada. Entonces]as ruedas
mientras el tractor est@en labores de siega o calibradoras mantienen el conjunto segador en
transportaci6n, movi_ndose sabre superficies que posici6n para prevenir el carte raspeo en casi
est@nrelativamente planas y rectas. todos los terrenos.
Otras condiciones de trabajo, coma la poda, qua AVISO: Ajuste las ruedas calibradoras con el
requierevelocidades bajas, podrian desengranar tractor en una superlicie nivelada plana.
el control de velocidad crucero. No emplee el 1. Ajuste la segadora a la altura de carte
control de velocidad crucero mientras eltractor se deseada con la manitla de ajuste de al-
desptaza par elevaciones, terrenos escarpados tura (Vea "PAPA AJUSTAR LA ALTURA DE
o mientras el tractor est_ en [abates de poda o CARTE DE LA SEGADOR_' en [a secci6n
virando. de OperaciSn de este manual).
1. Con el pedal (K) de marchaadelante apretado 2. Con la segadora a la altura deseada para ta
a la velocidad deseada, mover la palanca de posiciSn de carte, se tienen qua montar Ias
mando de crucero hacia adelante hasta la ruedas calibradoras de modo que queden
posici6n "SET" y mantenerla mientras se Ie- un poco sabre el suelo. Instale fas ruedas
vanta el pie deI pedal, ]uego soltar la palanca calibradoras en el agujero adecuado con el
(J) de mando de crucero. perno con resalto, la arandela de 3/8, y ta
Para desconectar el mando de crucero, e pujar tuerca de seguridad de 3/8-16 y apri@telos
fa pafanca hacia atr&s en la posici6n "OFF", o en farina segura.
apretar completamente et pedal del freno. 3, Repita el procedimiento para el lado opuesto
instatando la rueda calibradara en el mismo
PARA AJUSTAR LA ALTURA DE CARTE DE agujero de ajuste.
LA SEGADORA
La posici6n de la palanca elevadora (A)determina
a qu_ altura se cortar& el c_sped.
43
PARA TRANSPORTAR
Cuando empuje o arrastre su tractor aseg_rese
de desenganchar la transmisi6n poniendo el
control de la rueda tibre en la posici6n de marcha
de rueda libre, El control de marcha de rueda
libre esta situado en la barra de tracci6n trasera
deI tractor.
FUNCIONAMIENTO ATRAS 1. Levante la palanca de Ievantamiento deI ac-
Tu tractor est,_ equipado con el Sistema de Fun- cesorio a ta posici6nm&s alta con et control
cionamiento Atr&s (ROS). Cualquier tentativa del de levantamiento del accesorio.
operador de viajar marcha atr&scon el embrague 2. Tire del mando de la rueda libre hacia afuera
puesto apagar& el motor a menos que la Itave de y hacia abajo hasta que se coloque en laguia
ignici6n se ponga en la posici6nde "ON" del ROS. y sueltalo de manera que se mantenga en Ia
ATENCION: Ir marcha atr&s con et embrague posici6n de desenganchada.
puesto para cortar, no es recomendable. Po- • No empuje o arrastre el tractor amas de dos
niendo el ROSen posici6n"ON", para permitirel (2) MPH.
funcionamiento atr&s conel embrague puesto,se • Para velvet a accionar la transmisi6n, invierta
tiene que hacer s61ocuando el operadorIo consi- este procedimiento.
dera necesario para reposicionar la m&quina con Transmisi6n Enganchada
et dispositive embragado. No s|egue en rev_s
a menos que sea absolutamente necesario,
USAR EL SISTEMA DE FUNCIONAMIEr,_O
ATR,_,S-
Utilioe el tractor solamente si est& seguro de que
no ingresar&n niSos ni otras personas o animales
al _.rea deride se va a cortar et c_sped,
t, Presionar el pedal freno hasta el fondo.
2. Oon el motor en marcha, girar la llave del
interrupter de la ignici6n en e! sentido inverse Transm|si6n Desenganchada
al de tas agujas del reloj hasta Ia posici6n AVISO: Para proteger el cap6 contra el daSo
"ON", cuando transporte su tractor en un cami6n o
3 Mire hacia abajo y hacia atr&s no s61oantes remolcador, asegSrese que el cap6 est@cerrado
de ir marcha atr&s, sine mientras est6 yendo y asegurado al tractor. Use los medios apropia-
marcha atr,_s. dos para amarrar el cap6 al tractor (cuerdas,
4. Presione lentamente el pedal reverse de la cordeles, etc.).
impulsi6n para comenzar el rnovimiento. REMOLQUE DE CARRETILLAS O OTROS
5. Ouando el use del ROSes m_ts necesario, d6 ACCESORIOS
vuelta a la Ilave de ignici6n en el sentido de
Remolque solamente los accesodos recomenda-
Ias agujas deI reloj hasta Ia posici6n "ON". dos y especificados per el fabricante del tractor.
Use sentido com_n cuado este remolcando. Las
Posici6n ROS "ON" Motor en posici6n "ON"
cargas pesadas, cuando este yendo sobre una
pendiente, son peligrosas, las llantas pueden
pettier su tracci6n con el terreno y pueden oca-
sionar que pierda el control de su tractor.
MECANISMO DE AVISO DE SERVICIO /
CRONOMETRO
El recordatorio de servicio muestra el nt_merototal
•PAPA OPEPAR EN CERROS ............................................
ere. l)£ras= d_.f_o£!£_amientq de!.r#=otg.r=e!nd!ca
_h_ADVERTENCtA: No maneje hacia ardba o el memento en qua el motor o Ia cortadora de
hacia abajo en certes con pendientes superio- c_sped neoesita mantenimiento. Despu#s de cada
res a 15° y no maneje atravesando ninguna 50 horas de funcionamiento, e] icono de lata de
pendiente. Utilice ta guia de la pendiente aceite permanece encendido durante 2 horas o
proporcionada en la parte posteriora de este hasta que se reatiza el restablecimiento manual.
manual. Para restablecer la panta[lamanualmente, gire el
• Escoja la velocidad m&s lenta antes de arran- interruptor de arranq uea la posici6n de encendido
car hacia arriba o hacia abajo en cerros. y despues, a Ia de apagado cinco veces (1
• Evite parar o cambiar la velocidad en certes. segundo encendido, 1 segundo apagado). Para
• Si es absolutamente necesado el parar,empuje el mantenimiento del motor y de la cortadora de
el pedal de freno r&pidamente a la posiei6n de c_sped, consulte la secci6n Mantenimiento de
freno y enganche el freno de estacionamiento. este manual.
• Para volver a empezar con el movimiento, NOTA: El recordatorio de servicio se activa cuando
suelte Ientamente, el freno de estaoionamiento la Ilave de contacto est& en cualquier posici6nque
y el pedal de freno. no sea "STOP". Para una lectura precisa,Ia Ilave
• Apretar despacio el pedal apropiado hasta la debe permanecer en la posici6n "STOP" cuando
posici6nm_s lent& el motor no est,. en marcha,
• Gire siempre lentamente. 44
ANTES DE HACER ARRANCAR EL PARA HACER ARRANCAR EL MOTOR
MOTOR At hacer arrancar el motor per Ia primera vez o
REVISE EL NIVEL DE ACEITE DEL MOTOR si se ha acabado el combustible del motor, se
El motor en su tractor ha side enviado desde la necesitar-4 tiempo para el arranque extra para
f&brica lleno con aceite de calidad para verano, mover el combustible desde el estanque hasta
I, Revise el aceite del motor con el tractor en el motor.
terreno nivelado. 1. Aseg_rese que el control de rueda tibre este
en la posici6n enganchada.
2, Remueva la tapa/varilla indicadora de nivel de 2. Si_ntase en el sill6n en la posici6n de eper-
relleno del aceite y Iirnpielas, vuelva a insertar
[avarillaindicadorade nivelyatomillelatapa aci6n, suelte el pedal del freno y ponga el
freno de estacionamiento.
basra que quede apretada, espere per unos
cuantos segundos, remu_vala y lea el nivel 3. Mueva el embrague del accesorio a la
deI aceite. Si es necesario, agregue aceite posici6n desenganchado disengaged.
hasta que se haya alcanzado la marca Ileno 4, Mueva Ia palanca de control de la aceleraci6n
a fa posiciSn de estrangulaci6n.
(FULL) en lavarilla indicadora de nivel, No Io AVISO: Antes de arrancar, lea las instruccio-
llene demasiado.
* Para la operaci6n en clima frio, debe cambiar nes siguientes para el arranque en clirna frio y
el aceite para pealerarrancar m_s fztcilmente templado.
(Vea "Tabla de Viscosidad DeI Aceite" en Ia 5. Inserte Ia Ilave en la ignici6n y gire la tlave
secci6n de Mantenimento de este manual), en el sentido que giran las manillas del reloj
- Paracambiar el aceite det motor, vea lasecci6n a la posici6n de arranque start, y suelte Ia
de Mantenimento en este manual. Ilave tan pronto come arranque et motor, No
haga funcionar el arrancador continuamente
AGREGUE GASOLINA per m&s de quince segundos per minute. Si
, Llene el estanque de combustible. Llene el motor no arranca despu6s de varies inten-
basra la parte inferior del cuello de relleno del ratios, mueva el control de la aceleraci6n a
estanque de gasoUna. No Io llene demasiado, fa posici6n de r&pido, espere unos cuantos
Use gasolina regular, sin plorno, nueva y Iim- minutes y trate de nuevo. Si el motor sigue sin
pia con el minimo de 87 octanes. (El use de funcionar, mueva el control de la aceleraci6n
gasolina con plomo aumentar& los dep6sitos
de 6xido de plomo y carbono y se reducir& la a la posici6n de estrangulaci6n y intente de
duraci6n de la v&lvula). No mezcle et aceite nuevo.
con la gasolina. Paraasegurar que lagasoIina ARRANQUE CON TIEMPO TEMPLADO
utilizada sea fresca compre estanques los cu- (50°F/10°C Y MAS)
ales puedan set utilizados durante los primeros 6. Cuando arranque el motor, mueva el control
30 dias. de la aceleraci6n a la posiciSn de r&pido.
, Los accesorios y el embrague ahora pueden
_,PREOAUOI6N: Limpie el aceite oe] combus- set utilizados. Si el motor no acepta esta carga,
tible derrarnado. No almacene, derrame o use vuelva a arrancar el motor para permitirle que
gasolina cerca de una llama expuesta,
IMPORTANTE: Cuando se opere en temperatu- se caliente per un minute utilizando el estran-
ras per debajo de 32°F (0°C) use gaso]ina de gulador come describido ardba.
invierno limpia y nueva para auedar a asegurar ARRANQUE CON TIEMPO FRIO (50°F/10°C
un buen arranque en clima frio, Y MENOS)
PRECAUCION: Combustibles mezclados con 6. AI hacer arranear el motor, mantenga el
alcohol (conocidos come gasohoI, o el use de control de la aceleraci6n a Ia posici6n de es-
etanot o metanoI) pueden atraer la humedad, trangulaci6n hasta que el motor se caliente y
Ia que conduce a la separaciSn y formaci6n de emDieze func onar ma Una vez aue empieze
&cidos durante el almacenamiento. La gasolina a funcionar real, mueva inmediatamerite el
acidica puede dafiar el sistema deI combustible r.t_nfrnd_. A _._. _.r_r.6n a Ianos c 5n r,_Dda
evitar los problemascon el motor, se debe vaciar partir de varies segundos a varies minutes
et sistema de combustible antes de guardarlo per
un periodo de 30 dias o m_s. Vacie el estanque (cuanto m&s fria es la temperatura, m&s largo
de combustible, haga arrancar el motor y h&galo es el calentamiento).
funcionarhastaquelaslineasdelcombustibleyel CALENTAMIENTO PARA LA TRANSMISION
carburador queden vacios. La pr6ximatemporada AUTOMATICA
use combustible nuevo. Vea las Instrucciones Antes de conducir ]a unidad en un tiempo frio, la
para el Almacenamiento para m&s inforrnacibn, transmisi6n debe set calentada come las instruc-
Nunca use productos de limpieza para el motor o clones siguientes:
para eI carburador en el estanque del combustible 1. AsegOrese que eI tractor este situado en una
pues se pueden producir dafios permanentes, superficie nivelada.
2. Alivie el freno de estacionamiento y deje que
el freno vuelva a la posici6nde operaci6n.
3. Permita que la transmisi6n se caliente durante
un minute. Esto puede ser echo durante el
tlempo de calentamiento del motor,
45
• Los accesorios pueden ser utilizadosdurante el CONSEJOS PARA SEGAR
pedodo del recalentamiento del motor despu@s • No se pueden usar las cadenas para Ias Ilantas
que la transmisi6n halla sidocalentada. cuando la caja de la segadora estA adjunta af
AVISO: Si se encuentra a mucha altura (sobre tractor.
3000 pies) o en clima ffio (por debajo de 32°F • La segadora debe estar nivelada en forma
[0°C]), la mezela del combustible del carburador adecuada para obtener el mejor rendimiento
debe ser ajustada para el mejor rendimiento al segar. Vea "PARA NIVELAR LA CAJA DE
del motor. (Vea "PARA AJUSTAR EL CARBU- LA SEGADOPJ_' en la secci6n de Servicio y
RADOR" en Ia secc{6n de Servicio y Ajustes de Ajustes de este manual.
este manual). • El lado izquierdo de la segadora se debe usar
PURGAR LA TRANSMISION para recorte.
• Maneje de modo que los recortes se descarguen
_PRECAUCI6N: Nunca enganche o desen- en el Area que ya ha sido cortada. Mantenga
ganche la patanca del control de rueda libre el Area de corte a ta derecha del tractor. Esto
cuando el motor esta funcJonando. producirA una distribuciSn m_ pareja de los
Para asegurar la operaci6n y ejecuci6n adecuada, recortes y un corte mAs uniforme.
es recomendado que ]a transmisi6n sea purgada • AI segar las Area grandes, empiece girando a
antes de operar el tractor para la primera vez. ta derecha de modo que los recortes se des-
Este proceso removerS, cualquier aire adentro carguen, alejAndose de Ios arbustos, cercos,
de la transmisibn que se ha]la formado durante entradas de autom6viles, etc. Despu_,sde una
el transporte de su tractor. o dos vueltas, siegue en fa direcci6n opuesta,
IMPORTANTE: Si por acaso su transmisi6n debe haciendo virajes a la izquierda, basra que
termine.
set removida para servicio o reemplazo, debe
r j
ser purgada despu@sde Ia reinstalaci6n y antes
de operar el tractor.
1. Para mayor seguridad, ubique el tractor en
una superficie nivetada, despejada de cual-
quier objeto y abierta, con et motor apagado
y el freno de mano puesto.
2. Desenganche la transmisi6n poniendo el
control de rueda libre en ta posiciSn de desen-
ganchado (Vea"PARA ELTRANSPORTE" en
esta secciSn de este manual). 00272
3. Sentado en el asiento del tractor, empiece * Si el c_sped estA demasiado atto, se debe
el motor, Despu@s que este corriendo el mo- segar dos veces para reducir la carga y los
tor, mueva el control de estrangulaci6n a fa posibles peligros de incendio debido a los
posici6n de lento. Quitar el freno de mano. recortes secos. Haga el primer corte relativa-
_t, PRECAUCION: En el transcurso del paso 4, rnente alto; el segundo a la altura deseada.
puede que de pronto se pongan en movimiento , No siegue el cesped cuando estA mojado. El
las ruedas.
c_sped mojado taponarA Ia segadora y dejarA
4. Apretar el pedal de marcha adelante hasta rnontones indeseables. Permitaquese seque
el rondo, mantener por cinco (5) segundos el c_sped antes de segado.
y so]tar el pedal. Apretar el pedal de marcha - Sfempre opere el motor con unaaceleracibn
arras hasta el f0ndo, mantener por cinco (5) completa cuando siegue para asegurarse
segundos y soltar el pedal Repetir er proced- de conseguir un mejor rendimiento y una
imientotres (3) veces. descarga apropiada de los materiales. Regule
5. Apague el motor y embrague el freno de la velocidad de recorrido se]eccionando un
estacionamiento.
carnbio Io suficientemente bajo para obtener un
...6.....Enganche. la.transmisi6nponiendo e! control ............
rendimientode cortede parte de su segadora =-
de rueda libre en Ia posici6n de conducir (Vea y tambien Ia calidad deI corte deseada.
"PARA TRANSPORTAR" en esta secciSn del - Cuando opere con accesorios, seleccione una
manual). velocidad de recorrido que se acomode al ter-
7, Sentado en et asiento del tractor, empiece el reno y le permita obtener el mejor rendimiento
motor. Despu_s que este cordendo el motor, del accesorio que se est_ usando.
mueva el control de estrangulaci6n media
(1/2) velocidad. Quitar el freno de mano
8. Conduzca su tractor hacia adelante durante
aproximadamente cinco pies y entonces ha-
ciamarchaatrAscinco pies (150 cm). Repita
este proceso tres (3) veces.
Su transmisi6n esta ahora purgado y dispuesto
para ta operaci6n normal,
46
PROGRAMA DE i ANTI_3D _' OA_)A CAOA OAOA CADA CADA
A R_,_ ,.y
=_ .......
.o= j I e_" .......
T _t_d_ub_i=_I_. _ If ..............
0 _ _.F=_...............
c_=_=_i._,_ _o_
._= (=. ,,_o) ..................................... t#',,_ _ ......
M c_b_a,e_,_ _ol_o,(_!._..!!_*_ ..............
0 _=_ _'_° d_..._._ ...... I/_ .......................
O Inspecc_n_r el s]_en¢iador/ V #
R a rr,_tlguadot d_ chispa_
47
TRACTOR • Cuando el motor est#. en marcha con et inte-
Siempre observe Ias reglas de seguridad cuando rruptor de llave del sistema de funcionamiento
d@mantenimiento. atr&s (ROS) en la posici6n "ON" y elembrague
OPERACION DEL FRENO deI accesorio conectado, cualquier tentativa dei
operador de viajar marcha atr&s, NO apagar&
Si el 1_actornecesita m&s de cinco (5) pies para el motor.
detenerse a la m&xima veloddad al cambio m&salto
CUIDADO DE LA CUCHILLA
en una superficienivelada, de hormig6n o pavimen-
tada, hayque hacerle elservicio al freno. Ver "PARA Para obtener resultados 6ptimos, las cuch{llas
VERIFICAR SI FUNCIONA BIEN EL FRENO" en de la cortadora deben estar afiladas. Reemplace
el capitulo de Se_cio y ajustes de este manual. Ias cuchillas qua est@n gastadas, dobladas o
LLANTAS dar_adas.
- Mantenga todos los neum&ticos con la presi6n REMOOION DE LA CUCHILLA
de aire adecuada (Ver la PSI qua se indica en 1. Levante la segadora a su posici6nm&s alta
estos). para permitir el acceso alas cuchiIIas.
• Mantenga las Ilantas sin gasolina aceite o AVISO: Proteja sus manos con guantes y/o
substanalas qutmicas para control de insectos envuelva Ia cuchilla con una tela gruesa.
que pueden daSar la goma. 2, Remueva el perno de la cuchilla dandole
• Evite los tocones, ]as piedras, las grietas pro- vueJtas en el sentido inverso al de las agujas
fundas, Ios objetos afilados y otros peligros del reloj,
que pueden dar_ar alas llantas. 3. Instale la nueva cuchilta con el estampado
AVISO: Para arreglar las Ilantas perforadas 'q-HIS SIDE UP" en la direccion de la sega-
y p_ra prevenir que tenga ifantas pinchadas a dora y del conjunto del mandril.
causa de pequefas fugas, puede comprar el IMPORTANTE: Para asegurar la instalacion ap-
selto para llantas de su comerciante de partes de ropiada, posicione el agujero central de la cuchilIa
repuesto m&s corcano. Elselo previene que las con la estrella del conjunto del mandril.
llantas se sequen y tambi_n la corrosi6n. 4. Instale y apriete el perno de Ia cuchilla firme-
SISTEMA PRESENCIA OPERADOR Y SISTE- mente (Par 45-55 piesilibras/62-75 Nm).
MA FUNC|ONAMIENTO ATRAS (ROS) IMPORTANTE: El perno especial de Ia cuchilla
es termotratado.
Asegurarse de que et sistema de presencia
del operador y el sistema funcionamiento atr_s
funcionen bien. Si tu tractor no funci6n como Cuchilla _ !-C_,_ / Conjuntodel
descrito, reparar el problema inmediatamente. _/ Agojero
7"_'T_T Msnd,,
• El motor no arrancar& si el pedal de embra-
gueifreno est& completamente presionado y
el mando del embrague del accesorio est&
desconectado-:
VI_RIFI!_Z StSTEMA PRESENCIA OPERADOR erno
, Cuando el motor est& en marcha, cualquier
BATERIA
tentativa del operador de abandonar el asiento
sin haber puesto el freno de estacionamiento Su tractor cuenta con un sistema de carga de la
primero, apagar& el motor. bateria que es suficiente para el uso normal. Sin
• Cuando el motor est& en marcha y el embrague embargo, si se carga la bateria peri6dicamente,
del accesorio est& conectado, cualquier ten- con un cargador de autom6vi[es, se prolongar_.
tativa del operador de abandonar el asiento, su duraci6n.
apagar& el motor. • Mantenga la bateda y los terminales timpios.
° El embrague de! accesodo no tendria qua • Mantenga los pernos de la bateria apretados.
funcionar nunca si el operador no est& en su • Mantenga los agujeros de ventilaci6n peque-
asiento. r_osabiertos.
V# RtFI _7.SiSTE MA FUNCIONAMIE NTO ATR/I.S • Vuetva a cargar de 6-10 amperes por I hora.
-(ROS) ....................................................................................................
AVISO:-La bateriadel equipo original =de=su.........
• Cuando e] motor est& en marcha con el inte- tractor no becesita servicio. No intente abrir o
rruptorde llave en posici6n de motor "ON" y el remover las tapas o cubiertas. No esnecesario
embrague del accesorio conectado, cualquier ar_adir o verificar el nivel der _lectrSIito.
tentativa del operador de viajar marcha atr&s, PARA LIMPIAR LA BATERIA Y LOS TERMI-
apagar& el motor. NALES
Motor en posici6n "ON" La corrosi6n y la rnugre de fa bateria y de los
Posici6n ROS "ON" terminales pueden producir"escapes" de potencia
(Operaci6n Normal) en la bated&
1. Remueva la protecci6n de los terminales.
2. Desconecte el cable de la bateda NEGRO
primero y Iuego el cable de la bater_a ROJO
y remueva Ia bateria del tractor.
3. Enjuague la bateda con agua corriente y
sequela.
4. Umpie los terminales y tos extremos del cable
de la bateria con un cepillo de alambre hasta
qua queden brillantes.
48
5. Cubra los terminales con grasa o parafina. Revise el nivel del aceite del c&rter antes de
6. Reinstale Ia bateria (Vea "Reemplazar Ia arrancar el motor y despu6s de cada ocho (8)
Bateria" en la secci6n de Servicio y ajustes horas de use continuado. Apdete ]a tapa deI
de este manual). rellenoivarilla indicadora de nivel de{ aceite en
ENFRIAM|ENTO DEL TRANSEJE forma segura cada vez que revise el nivel del
aceite.
Las aletas de enfriamiento y el ventiladorde
la transmisi6n tienen que mantenerse limpios PARA CAMBIAR ELACEITE DEL MOTOR
para asegurar el enfriamiento adecuado. Determine la gama de ta temperatura esperada
No trate de limpiar el ventifador o la transmisi6n antes de cambiar el aceite. Todo el aceite debe
cuando el motor est_ funcionando o mientras Ia
cumplir con laclasificaci6n de servicio API SG-SL,
transmisi6n est_ caliente,
• Inspeccione el ventilador de enfriamiento • Aseg_rese que eltractor est_ en unasuperficie
nivelada.
para asegurarse que las aspas del ventilador
est(_n intactas y Iimpias. • El aceite se drenar_ m&s f_cilmente cuando
• Inspeccione las aletas de enfdamiento para est@caliente.
verificar si hay mugre, recortes de c6sped u • Recoja el aceite en un envase adecuado.
otros matedales, Para impedir daSos alas
1. Remueva Ia tapaivarilla indicadora de nive[
juntas, no use un rociador de aire compre- para relleno del aceite. Tenga cuidado de no
sado o de alta presidn para limpiar Ias aletas permitir que Iamugre entre en el motor cuando
de enfriamiento cambie el aceite,
NIVEL DEL FLUIDO DE LA BOMBA DEL
2. Desiice elaccesorio de purga delaceite desde
TRANSEJE
la posici6n de ensamblaje en el alojamiento
El transeje ha sido sellado en Ia f&brica y el de [a turbina del motor y sep&relo del motor.
mantenimiento del fluido no es necesario para
la vida deI transeje. En et caso de que el tran- Posici6n de Extensor
seje se filtrase o necesitase servicio, haga el Ensamblaie de drenaje
favor de ponerse en contacto con un centro de
servicio Sears o con un otro centro de servicio
cualificado.
CORREAS V
Revise las correas V para verificar si existe
deterioro y desgaste despu6s de 100 horas de
operaci6n y c&mbielas si es necesario. Las cot-
teas no son ajustables. Cambie tas correas si
empiezan a deslizarse debido al desgaste,
MOTOR
3, Para abrirlo, gire Ia tapa hacia Ia izquierda.
LUBRICACtON
Use selamente aceite de detergente de atta 4. Una vez que haya vaciado completamente el
calidad clasificado con la clasificaci6n SG-SL aceite, vuelva a colocar la tapa y girela hacia
de servicio API, Seleccione la calidad de visoo- la derecha hasta el tope.
sidad del aceite SAE seg_n su temperatura de 5, Vuelva afijarel accesorio de purga del aceite
operacidn esperada. en el alojamiento de la turbina del motor,
I CAUDAOES OEV=SCOS_DAD 0ESAC _ 6. Vuelva a llenar el motor con aceite a trav_s
....t / t ...... _ del tubo de la varilla indicadora de nivel para
i " ' I relleno del aceite. Vacielo Ientamente. No Ic
1 t ! 1 llene demasiado. Para la capacidad aproxio
._ 'o ' = _'_40 ' _ _j'._ ._ ' _ madavealas"EspeciflcacionesdelProducto'
...... ;a...........
_ ..................
secci6ndeestemanual; .....................................................
IGAI_ D_TE_fPERAT_RA ANri3CIPADA ANTES 08"L PROXI_ CAM610
._ ....
O_ AC E_TE_
7. Use unmedidor en latapajvarillaindicadora de
AVtSO: A pesar de que los aceites de mul- nivelpararellenodelaceite pararevisar elnivel,
tiviscosidad (5W30, 10W30, etc,) mejoran Mantengael aceite en la lineade ileno (FULL]
el arranque en clima frio, estos aceites de en lavarilta indicadorade niveL Apriete latapa
multiviscosidad van a aumentar el consume de en el tubo en forma segura cuando termine
aceite cuando se usan en temperaturas sobre
32° F (0 ° C). Revise el nivel del aceite del mo-
tor m&s a menudo, para evitar un posible da_o
en el motor, debido a que no tiene suficiente
aceite.
Cambie el aceite despu@sde 50 horas de
operaci6n o por lo menos una vez al aSo si el
tractor se utiliza menos 50 horas el aSo,
49
FILTRO DE AIRE LIMPIEZA DE LA ENTRADA DE AIREiAREAS
Su motor no va a funcionar en forma adecuada DE ENFRIAMIENTO
si usa un filtro sucio. Limpie el elemento del Para asegurar un enfriamiento adecuado,
prefiltro de espuma despu6s de cada 25 horas aseg0rese que la rejilla del c_sped, las aletas
de operaci6n o cada temporada. Dele servico al de enfdamiento, y otras superficies extemas del
cartucho de papel carla 100 horas de operaci6n motor se mantengan limpias en todo momento.
o cada temporada, Io que suceda primero. Cada 100 horas de operaci6n (m&s a menudo
Dele servicio al filtro de aire m&s a menudo bajo bajo condiciones extremadamente polvorosas
condiciones polvorosas o sucias), remueva la caja del ventilador y otras
1. Remueva las la cubierta. tapas de enfriamiento. Limpie las aletas de en-
PARA DARLE SERVlCIO AL PREFILTRO. friamiento y las superficies externas, seg0n sea
2. L&velo en detergente liquido y agua, necesario. Aseg0rese que se vuelvan a instalar
3. S_quelo apret&ndolo en un patio Iirnpio. Ias tapas de enfriamiento.
4, Impregnar en aceite de motor, Envu_lvalo en AVlSO: Si se opera la m_tquina con una rejilla
un patio limpio y absorbente y apri@telo para deec_sped bloqueada, sucia, o con las aletas
remover el exceso de aceite. de enfriamiento taponadas, y/o las tapas de
AVlSO: Siesta sucio o datiado reemplace el enfdamiento removidas se producir& dafio en el
preflltro. motor debido aI calentamiento excesivo.
PARA DARLE SERVICIO AL CARTUCHO
SILENCIADOR
1. Umpie el cartucho golpe&ndolo suavemente
Inspeccione y cambie el silenciador corroido y el
en una superficie plana. Si el cartucho esta
amortiguador de chispas (si viene equipado) pues
muy sucio o datiado c&mbie]o. pueden crear un peligrode incendio yio da_os.
2. Reinstale el cartucho del prefiltro, la cubierta
BUJiA(S)
y aseg0relos.
Cambie Ias bujia(s) al comienzo de cada tem-
AVISO: Los solventes de petr61eo, tales come
porada de siega o despu6s de cada 100 horas
el kerosene, no se deben usar para limpiar el
de operaci6n, Io que suceda primero. El tipo de
cartucho. Pueden producir el detedoro de este, bujia y el ajuste de la aber[ura aparecen en "ES-
No aceite el cartucho. No use aire de presi6n para PECIFICACIONES DEL PRODUCTO" secci6n
limpiado o secarlo. de este manual,
Manilla---___ FILTRO DE COMBUSTIBLE EN LINEA
Et filtro de combustible debe cambiarse una
vez cada temporada. Si el filtro de combustible
Cubietta se tapona, obstruyendo el flujo det combustible
hacia el carburador, es necesario cambiarlo,
1, Con el motor frio, remueva el filtro y tapone
las secciones de Ia I[nea de combustible.
Cartucho 2. Ponga et filtro de combustible nuevo en su
posici6n en ta linea de combustible con Ia
flecha sefialando hacia el carburador,
de/'_
Prefiltro 3. Aseg0rese de que no hayan fugas en la
Espuma linea def combustible y que las grapas
est6n colocadas en forma adecuada.
FILTRO DE ACEITE DEL MOTOR 4. Inmediatamente limpie toda la gasolina tier-
ramada.
Cambie el filtro de aceite del motor cada tempo-
rada ovez por medio que cambie el aceite, si e]
tractor se usa m&s de 100 horas en un aSo. Abrazadera---.-.._ _---.
_-, ./'_., _ ......._Abra2.ade ra
LIMPIF_ZADE LARE31LLADEAIRE ................................
L..... : .... U ..... )9 Yl } '_ .............................
La rejilla de aire debe mantenerse sin mugre y rlltro oe ... _/// _ }
combustible
paja para evitar el datio al motor debido aI sobre- ' _
calentamiento. Limpiela con un cepillo de alambre
o con aire comprimido para remover la mugre y
tas fibras de goma secas, pegadas.
5O
LIMPIEZA 4. Eche hacia atr&s la abrazadera de cierre del
adaptador de la boquilla y empuje L,ste en el
Limpie todo material extrafio de[ motor, Ia puerto de Iavado de la cubierta en el extrerno
bater_a,el asiento, el pulido, etc. izquierdo de la cubierta de la segadora. Suelte
Limpie los deseches de la placa gu{a, Los laabrazadera de cierre parafijar el adaptador
desechos pueden limitar el movimiento del eje en Ia boquilla.
del pedal del frenoiembrague, 1oque har__que
patine Ia correa y que se pierda la tracci6n.
•_,PRECAUCI6N: Evite todes los puntos de
enganche y las piezas m6viles.
Pedal Del
/Embrague/Freno
i i Superior
i' i
Placa
De
tMPORTANTE: Tire de la manguera para asegu-
rarse de que la conexi6n est_ bien fija.
5. Abra Ia Ilave deI agua.
PRECAUCION: 6. Desde la posici6n del operador deI tractor,
PUNTOS DE vuelva a arrancar el motor y ponga la palanca
ENGANCHE
de aceleraci6n en la posici6n "Fast" (rdpido).
SISTEMA DE DIRECC|ON, SALPICADERO,
GUARDABARROS Y SEGADORA NO MOSTRADOS IMPORTANTE: Vuelva a comprobar la zona para
asegurarse de que est& despejada,
, Mantenga }assuperficies pulidas y las ruedas 7. Mueva el control deIembmgue dei accesorio a
sin derrames de gasoiina, aceite, etc. la posici6n "ENGANCHAR". Mant6ngase en la
• Proteja las superficies pintadas con cera tipo posici6n del operador con la cubierta de corte
automotriz. acoplada hasta que la cubierta est6 limpia.
8. Mueva el control del embrague del accesorio a
No recomendamos que se utilice una manguera
la posici6n"DESENGANCHADO". Gire la Ilave
de jard{n o agua a presi6n para limpiar el de encendido a }aposici6n STOP para apagar
tractor a no ser que el motor y la transmisi6n el motor de] tractor. Cierre ]a tlave deI agua.
est_n cubiertos para protegerlos del agua. 9. Tire hacia atr&s la abrazadera de cierre dei
El agua en el motor y la transmisi6n acortan la adaptador de la boquilla para desconectar el
vida fitil del tractor. Utilizar aire comprimido o un adaptador de1puerto de lavado de ]a cubierta.
soplador de hojas para remover hierba, hojas y
10. Lleve el tractor a una zona seca, preferente-
basura del tractor y cortac6spedes.
mente de cemento o pavimentada. Mueva
PUERTO DE LAVADO DE LA CUBIERTA el control del embrague del acoesorio a la
posici6n "ENGANCHAR" para quitar el ex-
La cubierta de su tractor estd equipada con un ceso de aguay ayudar a que se seque antes
puerto de tavado sobre la superficie que forma de guardar el tractor.
parte del sistema de lavado de la cubierta. Se de-
ber{a utilizar cada vez que se haya usado ettractor. _ADVERTENCIA: Si el acoesorio de lavado
jade de su c_sped, Io bastante cerca de estardn expuestos a que la hoja les lance
una boca de riego come para que Ilegue Ia aquellos objetos con los que entre en contacto.
manguera del jardin. Sustituya inmediatamente el acoesorio de
lavado rote o que falta antes de velvet a
IMPORTANTE: Aseg0rese de que la boca de
usar la segadora.
descarga del tractor estd orientada LEJOS de
su casa, garaje, coches aparcados, etc. Quite * Tape redes los orificios de |a segadora con
la boca de ensacado o cubierta de mantillo si pernos y tuercas de seguridad.
est& acoplada.
2. Mueva el control del embrague del accesorio
a la posici6n "DESENGANCHADO", ponga el
freno de estacionamiento y apague el motor.
3. Enrosque el adaptador de ta boquilla (empa-
quetado con el manual del operador de{ trac-
tor) en el extreme de la manguera del jardin.
51
_ DVERTENCIA:PARA EVITAR LESIONES SERIAS, ANTES DE DAR CUALQUIER
SERVICIO O DE HACER AJUSTES:
1. Presione el pedal de freno completamente y aplique el freno de estacionamiento.
2. Ponga el embrague deI accesorio en la posici6n desenganchado (DISENGAGED).
3. Ponga la !lave de ignici6n en la posici6nde apagado (STOP) y remu_vaia.
4. AsegOrese que las cuchillas y que todas Ias partes movibles se hayan detenido comple-
tamente,
5, Desconecte el alambre de la bujia y p6ngalo en donde no pueda entrar en contacto con
_sta.
52
4, Realice el mismo procedimiento en el otro
lado del tractor. 9. Retire el resorte de sujeciSn (K), desUce la
5. FIJE LAS PIEZAS DE PROPULSION POS- abrazadera (L) hasta quitarla, y saque a
TERIORES (C) - Levante la parte posterior presiSn la guia de la caja (P) hasta que se
de la cortadora, ubique la ranura de la pieza salga del soporte.
de uniSn (D) por encima de la clavija que hay 10. Instale la correa pas&ndola por encima de Ia
en la barra posterior de la cortadora y fijela polea del motor (M) y fijadors de la correa
con una arandeia y un resorte de contenci6n. (G).
53
...... T ....
Po]ca del
Mandril
Uave Cuad_'ada(rue_._'
tmsera solamente)
56
REEMPLAZAR LA BATERIA PARA REMOVER EL CONJUNTO DEL CAP6
te_ADVERTENCIA: No haga cortocircuitocon los Y DEL ENREJADO
rminales de la bateria al permitir que una tlave 1. Levanteel cap5.
de tuerca o cualquier otroobjeto entre en contacto 2. Desabroche el conector del alambre de las
con ambos terminales a la misma vez. Antes de luces delanteras.
instalarta bateria remueva las pulseras de metal, 3. P&rese detante del tractor. Agarre el cap5 en
los relojes de pulsera de metal, los anillos, etc. los lades, incIinelo un poco hacia el motor y
El terminal positivetiene que conectarse primero s&quelo del tractor.
para evitar las chispas debido a la conexi6n a 4. Para volver a instalar eI cap6, aseg6rese de
tierra per accidente. votver a conectar el conector deI atambre de
las luces.
1, Levantamos Ia capotaa Ia posici6nlevantada,
2. Remueve ta protecci6n de los terminales.
3. Descenecte el cable de la bateria NEGRO
primero y tuego el cable de la bateria ROJO
y remueva la baterla del tractor, ___co Cap°ta
4. lnstale Ia nueva bateria con tos t_rminos en
misma posici6n come la bateda vieja. nector del
5. Reemplazamos cubierta terminal. lambre de
IDENTIFICACION DE PROBLEMAS:
Vea la secciSn apropiada en el manual a menos que estd dirigido a un centro de servicio Sears.
PROBLEMA CAUSA CORRECCtON
P_rdida de _. Coda mucho c_sped, muy r_.pido. "k Eleve la altura de corteired uzca lavelocid_d
fuerza 2. Aceleraei,Sn en la posici6n de "ESTRAN- 2. Aiuste eI control de la aceleraciSn.
GULACtON* (CHOKE).
3. AcumulaciSn de c_sped, hojas y basura 3. Limpie la pa:rte inferior de la caj_de la
debajo de la segadora. segadora,
4. Filtro de aire sucio. 4. Limpieicambie el filtro de airs.
5, Nivel de aceite bajo/aceite sucio. 5. Revise el nivelde aceitet'cambie el aceite.
6. Bujla fallada. 6. Umpie y vuelva a ajustar la abertura 0
cambie la bujia,
7. Filtm de combustible sucio, 7. Cambie el filtro de combustible,
8. Combustible raocioosucio. 8. Vaciarelestanque de combustible yvuelva
a Ilenar!o con gasoline nueva.
59
IDENT|FICACION DE PROBLEMAS:
Vea la secci6n apropieda en el manual a menos que est_ dirigido a un centre de servicio Sears.
,, ,........... ,,,,,,,,j ,,_
E| motor €onti i
n_a funeioran_ Sistema de control qua exige la presencia Revise el alambrado, los interruptores
Cuando el op. del operador --seguridad falfado. y ta conexiones.Si no est&n correctas
e_adot se baj_
del asiento con Pongase an contacto con un centre de
el embrague servicio cual_ficado "SEARS",
del accesorio
enganehado
6O
IDENTIFICACION DE PROBLEMAS:
Vea la secci6n apropiada en el manual a menos que est6 dir|gido a un centre de servicio Sears.
P6rdida de t, El controlde f_ada Iibre est& enla posici6n 1. Ponga e[ control de rueda Iibre enta
"DESENGANCHADO" (disengaged). posici6n "ENGANCHADO"(disengaged).
impulsi6n
2, Residues es en de Ia placa de direcci6n. 2, Ves"LIMPIEZA!' en la seeci6n de Manteni-
mento de este manual.
3_ La cerrea de impulsi6n de impulsiSn de 3. Reemplsce lacorrea de movimien-to ests
movimiento. gastada, daSada o rots.
4, Aire atrspsds en latmnsporte oe] servicio. 4. Purgue la transmisi6n.
5. Llave cuadrada de eje es ausente. 5, Vea "PARA REMOVER LAS RUEDAS"
en la secci6n de Ssrvicio y Ajustes de
este manual.
El motor tie_ Eicontml de la sceleraciSn deI motor norue 1. Mueva el control de la aceleraci6n a la
"contraex. a ustado en [a posici6n de velocidad media posiciSn de velocidad media y m_ima
plosiones '= y m&x ma (r&p da) antes de pars el motor. (r_,pida) antes de para el motor.
cuando s_
"APAGA"
61
62
GUIA SUGERIDA PARAMEDIR LAS PENDIENTESCON LA VISTA PARAUNA
OPERAC|ONSEGURA
O3
= ADVERTENCIA:Pamevltardafiosgraves, hagafuncionarsutractorarriba_
_ _ y abaJo de las pendientes, nunca transversalmente con respecto alas ]
_ pendientes, NO cortar pendientes mayores de 15 grados, Haga los
_ virajes 9radualmente para evitar volcarse o la p_rdida de control,
Tenga mucho culdado cuando camble de direcci6n en las pendientes,
Your Home
Our Home