Industrial detectors
Thermal detection - UniVario Heat detectors, Ex
WMX5000 3GD Part no.: 907268
“The WMX5000 3G heat detectors are ATEX-approved
for category 3, gas and dust, and are suitable for use in
Ex zones 2 and 22. They are designed to detect open fires
with rapid rise of temperature, e.g
~ Flammable liquids and gases
= Highly flammable plastics
‘They are designed specifically for operation in dity industrial
environments, both indoors and outdoors. In addition to
Product features stated temperature detection, rapid rises in temperature can
+ Robust stainless steel heat sensor also be registered by the rate-ofrise method, for early fre
+ Freely configurable response temperatures and detection. Equipped for operation as a conventional detector.
classes in accordance with EN 84-5, along with Extension to a detector with Loop AP protocol via the
rate-ofise and static responses, Setting via DIP KIMX5000 AP communication module
switches on the detector or SMX5000 service device
+ Serviee interface, history memory Optional accessories
+ Connection of remote indicator passible Remote indicator 908499
+ Foruse in Ex zones 2 and 22, KMX5000 AP communication module 905883,
IATEX category 3 GasiDust Relay module KMX5000 RK 36D 925999
Technical specifications Not included in delivery
Detection method Nicene Univaro base oa7s7
racket
Responca dasses A1,A2,B,C, indices SR Terminating resistor 1.8 K /0.5 W 875235
Response temperatres oie wean
2 Fe1'4F) Connection / mounting
‘onnect
Operating vokage 7SY-30V° Connection cable standard detector 2owire
(Quiescent curent 8ppro%.0.1mA Additional fault ine connection 2wire
‘Alarm curent consumption Remote indication 2wire
(ovinout quiescent cutend approx. 18 Recommended cable JY (St) ¥ 2x2x0.8 mm (0.03 inch)
aR trea Conductor eross-section max. 2.5 mm (AWG 13)
Normal operation naiaton 1 green LED, fashing
Faulindicaton curent approx. sma Approvals / marking
. ‘Type examination certificate BVS 07 ATEX E 156
Fauk indication ‘ yelow LED (2ndtne) EY conformity Russia in acc, with TP TC 012/201
20°C to 480°C Ex approval in ace. with NEC 500/505,
Operating temperature (arto 76°F) me
1P rating (EN 60529) tp 6567
Enclosure material Diecast aluminium
‘ max, 95%
Relative humity no condensation
‘Speciation according to EN 54 Part
Weight 5209 (1.2165)
Dimensions 413084 mm (lax)
5:1x33inen axl)
Brand Designation Order no. Approvals / marking
—__, [rnnsonsco | tt Be € Comonnm SO
‘WWX5000 3GD MX SF
(Ghee eo svones |G)Product Sheet I Detection
Industrial detectors
UniVario Detector accessories - Bases
Base MX5000 Ex
Technical specifications
Material ‘Aluminum
Relative humidity max. 100 %
Cable diameter 5-9mm
Gland 2 pcs. MIBx 1.5
Euistntal boning yes
Color rea
-40°Cto +100°C
Ambient temperature (40°F to #212°F)
Part no.: 912082
Detector base for installation of the UniVario industrial fre de-
tectors of the 3GD and Ex series. Contains cable inlets, EMC
and environmental sealing as well as terminals, Thus detec-
tors can be replaced without requiring connecting work.
Not included in delivery
End offine resistor 1.8 K//0.5 W 675235,
Dust protection cap MX5000, 921694
Spare parts
Seal 127 x2.9/1.6 mm 904752
Gland M 16 x 1.5 Ms Ex 904862
Sealing cord 8 mm Viton 0.036 m 800605
Approvals
See corresponding UniVerio detector
Brand Designation Order no.
1MX5000 Ex MX e2aaas
Minimax x
(sieonese) ooae8
Weight 580912 08)
Base MX5000 M20 Ex Part no.: 922432
Detector base for installation of the UniVario industrial fre
detectors of the 3GD and Ex series. Contains cable entries,
EMC and environmental seals and connecting terminals
Enables replacement ofa detectors without any terminal work
Not included in delivery
End of line resistor 1.8 K/0.5 W 675235
Dust protection cap MX5000 921694
Spare parts
Seal 127x2.9/ 1.6mm 904752
Gland M 20 x 1.5 Ms Ex nickel plated 925958
Sealing cord 12 mm Viton 0.036 m 925957
Materat ‘Aluminum
Relative humidity max. 100% Approvals
Cable ameter 712mm See corresponding UniVario detector.
Gland 2 pos. M20x 1.5
Equipotential bonding
teminal ou
Color red
40°C10 +100°¢
cee (40°F to 212°F)
Weight 5309 (1.2bs)
EsProduct Sheet I Detection
Industrial detectors
UniVario Detector accessories - Modules
Relay module KMX5000 RK 3GD
BEROP?
Product features
+ Dry changeover contacts for alarm and fault signaling
+ Integration into UniVario base
Technical specifications
Connection -conduetr ribbon cable
Operating votage 24V (14-29) DG
Power consumption KMXS000,
RKC3GD only (without detector
curren in normal operation
{aut relay on)
ower consumption KMX5000
RK 36D only (without detector
current) with activated alarm
and faut relay
ower consumption KMX5000,
RKC3GD only (without detector
caren) wih deactivated alarm
‘approx. 18 mAat24V
approx. 35 mAat24V
approx. 6 mAat24V
Part no.: 925999
Communication module for the operation of UniVario 36D
detectors (zone 2 and 22), independent of any fire detection
system. Dry contacts for alarm and fault signaling allow the
detectors to be used as stand-alone units, in any fre and
hazard detection system or in hazard management and
Control systems. The KMXS000 RK 3GD communication
module is designed to be integrated into the UniVario
detector base MX5000 Ex and may only be used in
Ex zones 2 and 22.
Included in delivery
Relay module KMX5000 RK 36D
Jumper
Installation material
Connection / mounting
Conductor cross-section min 0.5 ma? (AWG 20)
max. 2.5 mn (AWG 13)
Note
Use only with UniVario 8GD detectors in Ex zones 2 and 22.
and fault relay
Voltage load, contacts max. 60 VDC, 25 VAC
Currentioa, contacts max. 2A
Fault indication 1 yellow LED (2nd tne)
-40°C to 480°C
(40°F to 4176 °F)
5t0 85%
Operating temperature
Relative humisity no condensation
TRE 50 9 (0.1 Ios)
imerson (64 24 x 67 mm (Laat)
versions 25x0.9x22 inch (LxWaH)
Brand Designation Order no. Approvals / marking
Minimax | Relay module KMX5000 RK 3GD MX
wes |CES