Professional Documents
Culture Documents
ZTT Adss Cable 200m Span v2
ZTT Adss Cable 200m Span v2
:22-XJ08472-1-A
TECHNICAL SPECIFICATION
All-Dielectric Self-Supporting Fiber Cable
Address: No.88, Qixin Road, Nantong Economic and Technological Development Zone, Jiangsu Province, China.
Tel: +86-513-89191138 Fax: +86-513-8359 9670 Zip code: 226010 Website: www.zttcable.com
1. GENERAL
1.1 SCOPE
This listed specification covers the design requirements and performance standard for the supply of
optical fiber cable in the industry. It also includes ZTT premium designed cable with optical,
mechanical and geometrical characteristics.
ZTT cable possesses high tensile strength and flexibility in compact cable sizes. At the same time, it
provides excellent optical transmission and physical performance.
1.3 QUALITY
Excellent quality control is achieved through intense in-house quality check and stringent audit
acceptance by ISO 9001.
1.4 RELIABILITY
Initial and periodic product qualification tests for performance and durability are performed rigorously
to ensure product reliability.
1.5 REFERENCE
The cable which ZTT offered are designed, manufactured and tested according to international
standards as follows:
Specifications
Category Description
Before cable After cable
@1310 nm ≤0.35 dB/km ≤0.37 dB/km
@1383 nm ≤0.35 dB/km ≤0.37 dB/km
Attenuation @1550 nm ≤0.21 dB/km ≤0.24 dB/km
@1625 nm ≤0.23 dB/km
@1285~1625 nm ≤0.40 dB/km
Point Discontinuity @1310 nm, 1550 nm ≤0.05dB
Zero Dispersion Wavelength 1300~1324 nm
Zero Dispersion Slope ≤0.090 ps/nm2∙km
@1285~1330 nm ≤3.5 ps/nm∙km
Dispersion @1550 nm ≤18.0 ps/nm∙km
\Optical
Specifications @1625 nm ≤22.0 ps/nm∙km
PMD Individual Value ≤0.15 ps/√km
PMDQ Link Design value(M=20,Q=0.01%) ≤0.08 ps/√km
Fiber Cutoff Wavelength (λc) 1100~1320nm
Cable Cutoff Wavelength (λcc) ≤1260 nm
Macro bending Loss
(1 turn; Ф32 mm) @1550 nm ≤ 0.50 dB
(100 turns; Ф50 mm) @1310 nm ≤ 0.05 dB
(100 turns; Ф50 mm) @1550 nm ≤ 0.10 dB
(100 turns; R=30 mm) @1625 nm ≤ 0.10 dB
@1310 nm 9.2±0.4μm
Mode Field Diameter
@1550 nm 10.4±0.5μm
Cladding Diameter 125 ±0.7μm
Core / Clad Concentricity ≤0.4μm
1
2
3
4
5
6
7
Picture is only for reference 8
Technical Characteristics Construction:
The unique extruding technology provides 1. Outer sheath (AT)
the fibers in the tube with good flexibility and 2. Strength member (Aramid yarns)
bending endurance 3. Inner sheath (PE)
The unique fiber excess length control 4. Loose tube, fiber and jelly
method provides the cable with excellent 5. Central strength member (FRP)
mechanical and environmental properties 6. Cable jelly
Multiple water blocking material filling 7. Rip cord (*2, red)
provides dual water blocking function 8. One blue color strip (Width Nom. 3~5mm)
Provide good tension performance
Dimension and Properties
Fiber count 24G.652D 48 G.652D
No of loose tube / filler 4/2 8/0
Fiber No. per tube 6
Cable OD 12.2 mm5% 13.6mm5%
Physical
Cable weight 132 kg/km15% 165kg/km15%
Operation temperature range -30 deg C to + 60 deg C
Installation temperature range -30 deg C to + 60 deg C
Transport and storage temperature range -30 deg C to + 60 deg C
Max. span length 200m
Max. operation SAG (*) 1.5%
Rated tensile strength (RTS) 21.2KN
Mechanical Resistance Max. Allowed 12KN
Crush resistance 2000N/10cm
Minimal installation bending radius 20 x OD
Minimal operation bending radius 10 x OD
The cable is in accordance with applicable standard of cable and requirement of customer. The
following test items are carried out according to corresponding reference.
Wooden Drum
Note: The drum size & cable weight as above is estimated and final size & weight shall be confirmed
before shipment.
5.2 The color of cable marking is white. (The printing shall be carried out at interval of 1 meter on the
outer sheath of cable) The inner end of cable is then sealed with heat shrinkable end cap to prevent
ingress of water and is made available for testing. The outer end of cable is equipped with heat
shrinkable end cap. Outer sheath marking legend can be changed according to user’s requests.